upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
122 lines
3.2 KiB
122 lines
3.2 KiB
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright (c) 2011, Google Inc.
|
|
*/
|
|
|
|
#ifndef ASM_ARCH_PEI_DATA_H
|
|
#define ASM_ARCH_PEI_DATA_H
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
struct pch_usb3_controller_settings {
|
|
/* 0: Disable, 1: Enable, 2: Auto, 3: Smart Auto */
|
|
uint16_t mode;
|
|
/* 4 bit mask, 1: switchable, 0: not switchable */
|
|
uint16_t hs_port_switch_mask;
|
|
/* 0: No xHCI preOS driver, 1: xHCI preOS driver */
|
|
uint16_t preboot_support;
|
|
/* 0: Disable, 1: Enable */
|
|
uint16_t xhci_streams;
|
|
};
|
|
|
|
typedef asmlinkage void (*tx_byte_func)(unsigned char byte);
|
|
|
|
#define PEI_VERSION 6
|
|
|
|
struct __packed pei_data {
|
|
uint32_t pei_version;
|
|
uint32_t mchbar;
|
|
uint32_t dmibar;
|
|
uint32_t epbar;
|
|
uint32_t pciexbar;
|
|
uint16_t smbusbar;
|
|
uint32_t wdbbar;
|
|
uint32_t wdbsize;
|
|
uint32_t hpet_address;
|
|
uint32_t rcba;
|
|
uint32_t pmbase;
|
|
uint32_t gpiobase;
|
|
uint32_t thermalbase;
|
|
uint32_t system_type; /* 0 Mobile, 1 Desktop/Server */
|
|
uint32_t tseg_size;
|
|
uint8_t spd_addresses[4];
|
|
uint8_t ts_addresses[4];
|
|
int boot_mode;
|
|
int ec_present;
|
|
int gbe_enable;
|
|
/*
|
|
* 0 = leave channel enabled
|
|
* 1 = disable dimm 0 on channel
|
|
* 2 = disable dimm 1 on channel
|
|
* 3 = disable dimm 0+1 on channel
|
|
*/
|
|
int dimm_channel0_disabled;
|
|
int dimm_channel1_disabled;
|
|
/* Seed values saved in CMOS */
|
|
uint32_t scrambler_seed;
|
|
uint32_t scrambler_seed_s3;
|
|
/* Data read from flash and passed into MRC */
|
|
unsigned char *mrc_input;
|
|
unsigned int mrc_input_len;
|
|
/* Data from MRC that should be saved to flash */
|
|
unsigned char *mrc_output;
|
|
unsigned int mrc_output_len;
|
|
/*
|
|
* Max frequency DDR3 could be ran at. Could be one of four values:
|
|
* 800, 1067, 1333, 1600
|
|
*/
|
|
uint32_t max_ddr3_freq;
|
|
/*
|
|
* USB Port Configuration:
|
|
* [0] = enable
|
|
* [1] = overcurrent pin
|
|
* [2] = length
|
|
*
|
|
* Ports 0-7 can be mapped to OC0-OC3
|
|
* Ports 8-13 can be mapped to OC4-OC7
|
|
*
|
|
* Port Length
|
|
* MOBILE:
|
|
* < 0x050 = Setting 1 (back panel, 1-5in, lowest tx amplitude)
|
|
* < 0x140 = Setting 2 (back panel, 5-14in, highest tx amplitude)
|
|
* DESKTOP:
|
|
* < 0x080 = Setting 1 (front/back panel, <8in, lowest tx amplitude)
|
|
* < 0x130 = Setting 2 (back panel, 8-13in, higher tx amplitude)
|
|
* < 0x150 = Setting 3 (back panel, 13-15in, higest tx amplitude)
|
|
*/
|
|
uint16_t usb_port_config[16][3];
|
|
/* See the usb3 struct above for details */
|
|
struct pch_usb3_controller_settings usb3;
|
|
/*
|
|
* SPD data array for onboard RAM. Specify address 0xf0,
|
|
* 0xf1, 0xf2, 0xf3 to index one of the 4 slots in
|
|
* spd_address for a given "DIMM".
|
|
*/
|
|
uint8_t spd_data[4][256];
|
|
tx_byte_func tx_byte;
|
|
int ddr3lv_support;
|
|
/*
|
|
* pcie_init needs to be set to 1 to have the system agent initialise
|
|
* PCIe. Note: This should only be required if your system has Gen3
|
|
* devices and it will increase your boot time by at least 100ms.
|
|
*/
|
|
int pcie_init;
|
|
/*
|
|
* N mode functionality. Leave this setting at 0.
|
|
* 0 Auto
|
|
* 1 1N
|
|
* 2 2N
|
|
*/
|
|
int nmode;
|
|
/*
|
|
* DDR refresh rate config. JEDEC Standard No.21-C Annex K allows
|
|
* for DIMM SPD data to specify whether double-rate is required for
|
|
* extended operating temperature range.
|
|
* 0 Enable double rate based upon temperature thresholds
|
|
* 1 Normal rate
|
|
* 2 Always enable double rate
|
|
*/
|
|
int ddr_refresh_rate_config;
|
|
};
|
|
|
|
#endif
|
|
|