upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
478 lines
13 KiB
478 lines
13 KiB
/*
|
|
* File: scc.c
|
|
* Description:
|
|
* Basic ET HW initialization and packet RX/TX routines
|
|
*
|
|
* NOTE <<<IMPORTANT: PLEASE READ>>>:
|
|
* Do not cache Rx/Tx buffers!
|
|
*/
|
|
|
|
/*
|
|
* MPC823 <-> MC68160 Connections:
|
|
*
|
|
* Setup MPC823 to work with MC68160 Enhanced Ethernet
|
|
* Serial Tranceiver as follows:
|
|
*
|
|
* MPC823 Signal MC68160 Comments
|
|
* ------ ------ ------- --------
|
|
* PA-12 ETHTX --------> TX Eth. Port Transmit Data
|
|
* PB-18 E_TENA --------> TENA Eth. Transmit Port Enable
|
|
* PA-5 ETHTCK <-------- TCLK Eth. Port Transmit Clock
|
|
* PA-13 ETHRX <-------- RX Eth. Port Receive Data
|
|
* PC-8 E_RENA <-------- RENA Eth. Receive Enable
|
|
* PA-6 ETHRCK <-------- RCLK Eth. Port Receive Clock
|
|
* PC-9 E_CLSN <-------- CLSN Eth. Port Collision Indication
|
|
*
|
|
* FADS Board Signal MC68160 Comments
|
|
* ----------------- ------- --------
|
|
* (BCSR1) ETHEN* --------> CS2 Eth. Port Enable
|
|
* (BSCR4) TPSQEL* --------> TPSQEL Twisted Pair Signal Quality Error Test Enable
|
|
* (BCSR4) TPFLDL* --------> TPFLDL Twisted Pair Full-Duplex
|
|
* (BCSR4) ETHLOOP --------> LOOP Eth. Port Diagnostic Loop-Back
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <commproc.h>
|
|
#include <net.h>
|
|
#include <command.h>
|
|
|
|
#if defined(CONFIG_CMD_NET) && defined(SCC_ENET)
|
|
|
|
/* Ethernet Transmit and Receive Buffers */
|
|
#define DBUF_LENGTH 1520
|
|
|
|
#define TX_BUF_CNT 2
|
|
|
|
#define TOUT_LOOP 10000 /* 10 ms to have a packet sent */
|
|
|
|
static char txbuf[DBUF_LENGTH];
|
|
|
|
static uint rxIdx; /* index of the current RX buffer */
|
|
static uint txIdx; /* index of the current TX buffer */
|
|
|
|
/*
|
|
* SCC Ethernet Tx and Rx buffer descriptors allocated at the
|
|
* immr->udata_bd address on Dual-Port RAM
|
|
* Provide for Double Buffering
|
|
*/
|
|
|
|
typedef volatile struct CommonBufferDescriptor {
|
|
cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
|
|
cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
|
|
} RTXBD;
|
|
|
|
static RTXBD *rtx;
|
|
|
|
static int scc_send(struct eth_device *dev, void *packet, int length);
|
|
static int scc_recv(struct eth_device* dev);
|
|
static int scc_init (struct eth_device* dev, bd_t * bd);
|
|
static void scc_halt(struct eth_device* dev);
|
|
|
|
int scc_initialize(bd_t *bis)
|
|
{
|
|
struct eth_device* dev;
|
|
|
|
dev = (struct eth_device*) malloc(sizeof *dev);
|
|
memset(dev, 0, sizeof *dev);
|
|
|
|
strcpy(dev->name, "SCC");
|
|
dev->iobase = 0;
|
|
dev->priv = 0;
|
|
dev->init = scc_init;
|
|
dev->halt = scc_halt;
|
|
dev->send = scc_send;
|
|
dev->recv = scc_recv;
|
|
|
|
eth_register(dev);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int scc_send(struct eth_device *dev, void *packet, int length)
|
|
{
|
|
int i, j=0;
|
|
#if 0
|
|
volatile char *in, *out;
|
|
#endif
|
|
|
|
/* section 16.9.23.3
|
|
* Wait for ready
|
|
*/
|
|
#if 0
|
|
while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY);
|
|
out = (char *)(rtx->txbd[txIdx].cbd_bufaddr);
|
|
in = packet;
|
|
for(i = 0; i < length; i++) {
|
|
*out++ = *in++;
|
|
}
|
|
rtx->txbd[txIdx].cbd_datlen = length;
|
|
rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST);
|
|
while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++;
|
|
|
|
#ifdef ET_DEBUG
|
|
printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
|
|
#endif
|
|
i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
|
|
|
|
/* wrap around buffer index when necessary */
|
|
if (txIdx >= TX_BUF_CNT) txIdx = 0;
|
|
#endif
|
|
|
|
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
|
|
udelay (1); /* will also trigger Wd if needed */
|
|
j++;
|
|
}
|
|
if (j>=TOUT_LOOP) printf("TX not ready\n");
|
|
rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
|
|
rtx->txbd[txIdx].cbd_datlen = length;
|
|
rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP);
|
|
while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
|
|
udelay (1); /* will also trigger Wd if needed */
|
|
j++;
|
|
}
|
|
if (j>=TOUT_LOOP) printf("TX timeout\n");
|
|
#ifdef ET_DEBUG
|
|
printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
|
|
#endif
|
|
i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
|
|
return i;
|
|
}
|
|
|
|
static int scc_recv (struct eth_device *dev)
|
|
{
|
|
int length;
|
|
|
|
for (;;) {
|
|
/* section 16.9.23.2 */
|
|
if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
|
|
length = -1;
|
|
break; /* nothing received - leave for() loop */
|
|
}
|
|
|
|
length = rtx->rxbd[rxIdx].cbd_datlen;
|
|
|
|
if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
|
|
#ifdef ET_DEBUG
|
|
printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
|
|
#endif
|
|
} else {
|
|
/* Pass the packet up to the protocol layers. */
|
|
net_process_received_packet(net_rx_packets[rxIdx],
|
|
length - 4);
|
|
}
|
|
|
|
|
|
/* Give the buffer back to the SCC. */
|
|
rtx->rxbd[rxIdx].cbd_datlen = 0;
|
|
|
|
/* wrap around buffer index when necessary */
|
|
if ((rxIdx + 1) >= PKTBUFSRX) {
|
|
rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
|
|
(BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
|
|
rxIdx = 0;
|
|
} else {
|
|
rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
|
|
rxIdx++;
|
|
}
|
|
}
|
|
return length;
|
|
}
|
|
|
|
/**************************************************************
|
|
*
|
|
* SCC Ethernet Initialization Routine
|
|
*
|
|
*************************************************************/
|
|
|
|
static int scc_init (struct eth_device *dev, bd_t * bis)
|
|
{
|
|
|
|
int i;
|
|
scc_enet_t *pram_ptr;
|
|
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]);
|
|
|
|
rxIdx = 0;
|
|
txIdx = 0;
|
|
|
|
if (!rtx) {
|
|
#ifdef CONFIG_SYS_ALLOC_DPRAM
|
|
rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
|
|
dpram_alloc_align (sizeof (RTXBD), 8));
|
|
#else
|
|
rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
|
|
#endif
|
|
}
|
|
|
|
#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
|
|
/* Configure port A pins for Txd and Rxd.
|
|
*/
|
|
immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
|
|
immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
|
|
immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
|
|
#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
|
|
/* Configure port B pins for Txd and Rxd.
|
|
*/
|
|
immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
|
|
immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
|
|
immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
|
|
#else
|
|
#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
|
|
#endif
|
|
|
|
#if defined(PC_ENET_LBK)
|
|
/* Configure port C pins to disable External Loopback
|
|
*/
|
|
immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
|
|
immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
|
|
immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
|
|
immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
|
|
#endif /* PC_ENET_LBK */
|
|
|
|
/* Configure port C pins to enable CLSN and RENA.
|
|
*/
|
|
immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
|
|
immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
|
|
immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
|
|
|
|
/* Configure port A for TCLK and RCLK.
|
|
*/
|
|
immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
|
|
immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
|
|
|
|
/*
|
|
* Configure Serial Interface clock routing -- see section 16.7.5.3
|
|
* First, clear all SCC bits to zero, then set the ones we want.
|
|
*/
|
|
|
|
immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
|
|
immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
|
|
|
|
|
|
/*
|
|
* Initialize SDCR -- see section 16.9.23.7
|
|
* SDMA configuration register
|
|
*/
|
|
immr->im_siu_conf.sc_sdcr = 0x01;
|
|
|
|
|
|
/*
|
|
* Setup SCC Ethernet Parameter RAM
|
|
*/
|
|
|
|
pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
|
|
pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
|
|
|
|
pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
|
|
|
|
pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
|
|
pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
|
|
|
|
/*
|
|
* Setup Receiver Buffer Descriptors (13.14.24.18)
|
|
* Settings:
|
|
* Empty, Wrap
|
|
*/
|
|
|
|
for (i = 0; i < PKTBUFSRX; i++) {
|
|
rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
|
|
rtx->rxbd[i].cbd_datlen = 0; /* Reset */
|
|
rtx->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i];
|
|
}
|
|
|
|
rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
|
|
|
|
/*
|
|
* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
|
|
* Settings:
|
|
* Add PADs to Short FRAMES, Wrap, Last, Tx CRC
|
|
*/
|
|
|
|
for (i = 0; i < TX_BUF_CNT; i++) {
|
|
rtx->txbd[i].cbd_sc =
|
|
(BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
|
|
rtx->txbd[i].cbd_datlen = 0; /* Reset */
|
|
rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
|
|
}
|
|
|
|
rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
|
|
|
|
/*
|
|
* Enter Command: Initialize Rx Params for SCC
|
|
*/
|
|
|
|
do { /* Spin until ready to issue command */
|
|
__asm__ ("eieio");
|
|
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
|
|
/* Issue command */
|
|
immr->im_cpm.cp_cpcr =
|
|
((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
|
|
do { /* Spin until command processed */
|
|
__asm__ ("eieio");
|
|
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
|
|
|
|
/*
|
|
* Ethernet Specific Parameter RAM
|
|
* see table 13-16, pg. 660,
|
|
* pg. 681 (example with suggested settings)
|
|
*/
|
|
|
|
pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
|
|
pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
|
|
pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
|
|
pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
|
|
pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
|
|
pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
|
|
|
|
pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
|
|
pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
|
|
pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
|
|
|
|
pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
|
|
pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
|
|
|
|
pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
|
|
pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
|
|
pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
|
|
pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
|
|
|
|
#define ea eth_get_ethaddr()
|
|
pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
|
|
pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
|
|
pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
|
|
#undef ea
|
|
|
|
pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
|
|
pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
|
|
pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
|
|
pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
|
|
pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
|
|
pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
|
|
pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
|
|
pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
|
|
|
|
/*
|
|
* Enter Command: Initialize Tx Params for SCC
|
|
*/
|
|
|
|
do { /* Spin until ready to issue command */
|
|
__asm__ ("eieio");
|
|
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
|
|
/* Issue command */
|
|
immr->im_cpm.cp_cpcr =
|
|
((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
|
|
do { /* Spin until command processed */
|
|
__asm__ ("eieio");
|
|
} while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
|
|
|
|
/*
|
|
* Mask all Events in SCCM - we use polling mode
|
|
*/
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0;
|
|
|
|
/*
|
|
* Clear Events in SCCE -- Clear bits by writing 1's
|
|
*/
|
|
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0);
|
|
|
|
|
|
/*
|
|
* Initialize GSMR High 32-Bits
|
|
* Settings: Normal Mode
|
|
*/
|
|
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0;
|
|
|
|
/*
|
|
* Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
|
|
* Settings:
|
|
* TCI = Invert
|
|
* TPL = 48 bits
|
|
* TPP = Repeating 10's
|
|
* MODE = Ethernet
|
|
*/
|
|
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI |
|
|
SCC_GSMRL_TPL_48 |
|
|
SCC_GSMRL_TPP_10 |
|
|
SCC_GSMRL_MODE_ENET);
|
|
|
|
/*
|
|
* Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
|
|
*/
|
|
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555;
|
|
|
|
/*
|
|
* Initialize the PSMR
|
|
* Settings:
|
|
* CRC = 32-Bit CCITT
|
|
* NIB = Begin searching for SFD 22 bits after RENA
|
|
* FDE = Full Duplex Enable
|
|
* LPB = Loopback Enable (Needed when FDE is set)
|
|
* BRO = Reject broadcast packets
|
|
* PROMISCOUS = Catch all packets regardless of dest. MAC adress
|
|
*/
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC |
|
|
SCC_PSMR_NIB22 |
|
|
#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
|
|
SCC_PSMR_FDE | SCC_PSMR_LPB |
|
|
#endif
|
|
#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
|
|
SCC_PSMR_BRO |
|
|
#endif
|
|
#if defined(CONFIG_SCC_ENET_PROMISCOUS)
|
|
SCC_PSMR_PRO |
|
|
#endif
|
|
0;
|
|
|
|
/*
|
|
* Configure Ethernet TENA Signal
|
|
*/
|
|
|
|
#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
|
|
immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
|
|
immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
|
|
#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
|
|
immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
|
|
immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
|
|
#else
|
|
#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
|
|
#endif
|
|
|
|
/*
|
|
* Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
|
|
*/
|
|
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
|
|
(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
static void scc_halt (struct eth_device *dev)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
|
|
~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
|
|
immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
|
|
}
|
|
|
|
#if 0
|
|
void restart (void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
|
|
immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
|
|
(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
|
|
}
|
|
#endif
|
|
#endif
|
|
|