upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
646 lines
15 KiB
646 lines
15 KiB
/*
|
|
* INCA-IP internal switch ethernet driver.
|
|
*
|
|
* (C) Copyright 2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
|
|
&& defined(CONFIG_INCA_IP_SWITCH)
|
|
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <asm/inca-ip.h>
|
|
#include <asm/addrspace.h>
|
|
|
|
|
|
#define NUM_RX_DESC PKTBUFSRX
|
|
#define NUM_TX_DESC 3
|
|
#define TOUT_LOOP 1000000
|
|
|
|
|
|
#define DELAY udelay(10000)
|
|
|
|
#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value;
|
|
#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
|
|
#define SW_WRITE_REG(reg, value) \
|
|
*((volatile u32*)reg) = (u32)value;\
|
|
DELAY;\
|
|
*((volatile u32*)reg) = (u32)value;
|
|
|
|
#define SW_READ_REG(reg, value) \
|
|
value = (u32)*((volatile u32*)reg);\
|
|
DELAY;\
|
|
value = (u32)*((volatile u32*)reg);
|
|
|
|
#define INCA_DMA_TX_POLLING_TIME 0x07
|
|
#define INCA_DMA_RX_POLLING_TIME 0x07
|
|
|
|
#define INCA_DMA_TX_HOLD 0x80000000
|
|
#define INCA_DMA_TX_EOP 0x40000000
|
|
#define INCA_DMA_TX_SOP 0x20000000
|
|
#define INCA_DMA_TX_ICPT 0x10000000
|
|
#define INCA_DMA_TX_IEOP 0x08000000
|
|
|
|
#define INCA_DMA_RX_C 0x80000000
|
|
#define INCA_DMA_RX_SOP 0x40000000
|
|
#define INCA_DMA_RX_EOP 0x20000000
|
|
|
|
|
|
typedef struct
|
|
{
|
|
union
|
|
{
|
|
struct
|
|
{
|
|
volatile u32 HOLD :1;
|
|
volatile u32 ICpt :1;
|
|
volatile u32 IEop :1;
|
|
volatile u32 offset :3;
|
|
volatile u32 reserved0 :4;
|
|
volatile u32 NFB :22;
|
|
}field;
|
|
|
|
volatile u32 word;
|
|
}params;
|
|
|
|
volatile u32 nextRxDescPtr;
|
|
|
|
volatile u32 RxDataPtr;
|
|
|
|
union
|
|
{
|
|
struct
|
|
{
|
|
volatile u32 C :1;
|
|
volatile u32 Sop :1;
|
|
volatile u32 Eop :1;
|
|
volatile u32 reserved3 :12;
|
|
volatile u32 NBT :17;
|
|
}field;
|
|
|
|
volatile u32 word;
|
|
}status;
|
|
|
|
} inca_rx_descriptor_t;
|
|
|
|
|
|
typedef struct
|
|
{
|
|
union
|
|
{
|
|
struct
|
|
{
|
|
volatile u32 HOLD :1;
|
|
volatile u32 Eop :1;
|
|
volatile u32 Sop :1;
|
|
volatile u32 ICpt :1;
|
|
volatile u32 IEop :1;
|
|
volatile u32 reserved0 :5;
|
|
volatile u32 NBA :22;
|
|
}field;
|
|
|
|
volatile u32 word;
|
|
}params;
|
|
|
|
volatile u32 nextTxDescPtr;
|
|
|
|
volatile u32 TxDataPtr;
|
|
|
|
volatile u32 C :1;
|
|
volatile u32 reserved3 :31;
|
|
|
|
} inca_tx_descriptor_t;
|
|
|
|
|
|
static inca_rx_descriptor_t rx_ring[NUM_RX_DESC] __attribute__ ((aligned(16)));
|
|
static inca_tx_descriptor_t tx_ring[NUM_TX_DESC] __attribute__ ((aligned(16)));
|
|
|
|
static int tx_new, rx_new, tx_hold, rx_hold;
|
|
static int tx_old_hold = -1;
|
|
static int initialized = 0;
|
|
|
|
|
|
static int inca_switch_init(struct eth_device *dev, bd_t * bis);
|
|
static int inca_switch_send(struct eth_device *dev, volatile void *packet,
|
|
int length);
|
|
static int inca_switch_recv(struct eth_device *dev);
|
|
static void inca_switch_halt(struct eth_device *dev);
|
|
static void inca_init_switch_chip(void);
|
|
static void inca_dma_init(void);
|
|
|
|
|
|
|
|
int inca_switch_initialize(bd_t * bis)
|
|
{
|
|
struct eth_device *dev;
|
|
|
|
#if 0
|
|
printf("Entered inca_switch_initialize()\n");
|
|
#endif
|
|
|
|
if (!(dev = (struct eth_device *) malloc (sizeof *dev)))
|
|
{
|
|
printf("Failed to allocate memory\n");
|
|
return 0;
|
|
}
|
|
memset(dev, 0, sizeof(*dev));
|
|
|
|
inca_dma_init();
|
|
|
|
inca_init_switch_chip();
|
|
|
|
sprintf(dev->name, "INCA-IP Switch");
|
|
dev->init = inca_switch_init;
|
|
dev->halt = inca_switch_halt;
|
|
dev->send = inca_switch_send;
|
|
dev->recv = inca_switch_recv;
|
|
|
|
eth_register(dev);
|
|
|
|
#if 0
|
|
printf("Leaving inca_switch_initialize()\n");
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
static int inca_switch_init(struct eth_device *dev, bd_t * bis)
|
|
{
|
|
int i;
|
|
u32 v, regValue;
|
|
u16 wTmp;
|
|
|
|
#if 0
|
|
printf("Entering inca_switch_init()\n");
|
|
#endif
|
|
|
|
/* Set MAC address.
|
|
*/
|
|
wTmp = (u16)dev->enetaddr[0];
|
|
regValue = (wTmp << 8) | dev->enetaddr[1];
|
|
|
|
SW_WRITE_REG(INCA_IP_Switch_PMAC_SA1, regValue);
|
|
|
|
wTmp = (u16)dev->enetaddr[2];
|
|
regValue = (wTmp << 8) | dev->enetaddr[3];
|
|
regValue = regValue << 16;
|
|
wTmp = (u16)dev->enetaddr[4];
|
|
regValue |= (wTmp<<8) | dev->enetaddr[5];
|
|
|
|
SW_WRITE_REG(INCA_IP_Switch_PMAC_SA2, regValue);
|
|
|
|
/* Initialize the descriptor rings.
|
|
*/
|
|
for (i = 0; i < NUM_RX_DESC; i++)
|
|
{
|
|
inca_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_ring[i]);
|
|
memset(rx_desc, 0, sizeof(rx_ring[i]));
|
|
|
|
/* Set maximum size of receive buffer.
|
|
*/
|
|
rx_desc->params.field.NFB = PKTSIZE_ALIGN;
|
|
|
|
/* Set the offset of the receive buffer. Zero means
|
|
* that the offset mechanism is not used.
|
|
*/
|
|
rx_desc->params.field.offset = 0;
|
|
|
|
/* Check if it is the last descriptor.
|
|
*/
|
|
if (i == (NUM_RX_DESC - 1))
|
|
{
|
|
/* Let the last descriptor point to the first
|
|
* one.
|
|
*/
|
|
rx_desc->nextRxDescPtr = KSEG1ADDR((u32)rx_ring);
|
|
}
|
|
else
|
|
{
|
|
/* Set the address of the next descriptor.
|
|
*/
|
|
rx_desc->nextRxDescPtr = (u32)KSEG1ADDR(&rx_ring[i+1]);
|
|
}
|
|
|
|
rx_desc->RxDataPtr = (u32)KSEG1ADDR(NetRxPackets[i]);
|
|
}
|
|
|
|
#if 0
|
|
printf("rx_ring = 0x%08X 0x%08X\n", (u32)rx_ring, (u32)&rx_ring[0]);
|
|
printf("tx_ring = 0x%08X 0x%08X\n", (u32)tx_ring, (u32)&tx_ring[0]);
|
|
#endif
|
|
|
|
for (i = 0; i < NUM_TX_DESC; i++)
|
|
{
|
|
inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[i]);
|
|
|
|
memset(tx_desc, 0, sizeof(tx_ring[i]));
|
|
|
|
tx_desc->params.word = 0;
|
|
tx_desc->params.field.HOLD = 1;
|
|
tx_desc->C = 1;
|
|
|
|
/* Check if it is the last descriptor.
|
|
*/
|
|
if (i == (NUM_TX_DESC - 1))
|
|
{
|
|
/* Let the last descriptor point to the
|
|
* first one.
|
|
*/
|
|
tx_desc->nextTxDescPtr = KSEG1ADDR((u32)tx_ring);
|
|
}
|
|
else
|
|
{
|
|
/* Set the address of the next descriptor.
|
|
*/
|
|
tx_desc->nextTxDescPtr = (u32)KSEG1ADDR(&tx_ring[i+1]);
|
|
}
|
|
}
|
|
|
|
/* Initialize RxDMA.
|
|
*/
|
|
DMA_READ_REG(INCA_IP_DMA_DMA_RXISR, v);
|
|
#if 0
|
|
printf("RX status = 0x%08X\n", v);
|
|
#endif
|
|
|
|
/* Writing to the FRDA of CHANNEL.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXFRDA0, (u32)rx_ring);
|
|
|
|
/* Writing to the COMMAND REG.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0,
|
|
INCA_IP_DMA_DMA_RXCCR0_INIT);
|
|
|
|
/* Initialize TxDMA.
|
|
*/
|
|
DMA_READ_REG(INCA_IP_DMA_DMA_TXISR, v);
|
|
#if 0
|
|
printf("TX status = 0x%08X\n", v);
|
|
#endif
|
|
|
|
/* Writing to the FRDA of CHANNEL.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXFRDA0, (u32)tx_ring);
|
|
|
|
tx_new = rx_new = 0;
|
|
|
|
tx_hold = NUM_TX_DESC - 1;
|
|
rx_hold = NUM_RX_DESC - 1;
|
|
|
|
#if 0
|
|
rx_ring[rx_hold].params.field.HOLD = 1;
|
|
#endif
|
|
/* enable spanning tree forwarding, enable the CPU port */
|
|
/* ST_PT:
|
|
CPS (CPU port status) 0x3 (forwarding)
|
|
LPS (LAN port status) 0x3 (forwarding)
|
|
PPS (PC port status) 0x3 (forwarding)
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0x3f);
|
|
|
|
#if 0
|
|
printf("Leaving inca_switch_init()\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int inca_switch_send(struct eth_device *dev, volatile void *packet,
|
|
int length)
|
|
{
|
|
int i;
|
|
int res = -1;
|
|
u32 command;
|
|
u32 regValue;
|
|
inca_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_ring[tx_new]);
|
|
|
|
#if 0
|
|
printf("Entered inca_switch_send()\n");
|
|
#endif
|
|
|
|
if (length <= 0)
|
|
{
|
|
printf ("%s: bad packet size: %d\n", dev->name, length);
|
|
goto Done;
|
|
}
|
|
|
|
for(i = 0; tx_desc->C == 0; i++)
|
|
{
|
|
if (i >= TOUT_LOOP)
|
|
{
|
|
printf("%s: tx error buffer not ready\n", dev->name);
|
|
goto Done;
|
|
}
|
|
}
|
|
|
|
if (tx_old_hold >= 0)
|
|
{
|
|
KSEG1ADDR(&tx_ring[tx_old_hold])->params.field.HOLD = 1;
|
|
}
|
|
tx_old_hold = tx_hold;
|
|
|
|
tx_desc->params.word =
|
|
(INCA_DMA_TX_SOP | INCA_DMA_TX_EOP | INCA_DMA_TX_HOLD);
|
|
|
|
tx_desc->C = 0;
|
|
tx_desc->TxDataPtr = (u32)packet;
|
|
tx_desc->params.field.NBA = length;
|
|
|
|
KSEG1ADDR(&tx_ring[tx_hold])->params.field.HOLD = 0;
|
|
|
|
tx_hold = tx_new;
|
|
tx_new = (tx_new + 1) % NUM_TX_DESC;
|
|
|
|
|
|
if (! initialized)
|
|
{
|
|
command = INCA_IP_DMA_DMA_TXCCR0_INIT;
|
|
initialized = 1;
|
|
}
|
|
else
|
|
{
|
|
command = INCA_IP_DMA_DMA_TXCCR0_HR;
|
|
}
|
|
|
|
DMA_READ_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
|
|
regValue |= command;
|
|
#if 0
|
|
printf("regValue = 0x%x\n", regValue);
|
|
#endif
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, regValue);
|
|
|
|
#if 1
|
|
for(i = 0; KSEG1ADDR(&tx_ring[tx_hold])->C == 0; i++)
|
|
{
|
|
if (i >= TOUT_LOOP)
|
|
{
|
|
printf("%s: tx buffer not ready\n", dev->name);
|
|
goto Done;
|
|
}
|
|
}
|
|
#endif
|
|
res = length;
|
|
Done:
|
|
#if 0
|
|
printf("Leaving inca_switch_send()\n");
|
|
#endif
|
|
return res;
|
|
}
|
|
|
|
|
|
static int inca_switch_recv(struct eth_device *dev)
|
|
{
|
|
int length = 0;
|
|
inca_rx_descriptor_t * rx_desc;
|
|
|
|
#if 0
|
|
printf("Entered inca_switch_recv()\n");
|
|
#endif
|
|
|
|
for (;;)
|
|
{
|
|
rx_desc = KSEG1ADDR(&rx_ring[rx_new]);
|
|
|
|
if (rx_desc->status.field.C == 0)
|
|
{
|
|
break;
|
|
}
|
|
|
|
#if 0
|
|
rx_ring[rx_new].params.field.HOLD = 1;
|
|
#endif
|
|
|
|
if (! rx_desc->status.field.Eop)
|
|
{
|
|
printf("Partly received packet!!!\n");
|
|
break;
|
|
}
|
|
|
|
length = rx_desc->status.field.NBT;
|
|
rx_desc->status.word &=
|
|
~(INCA_DMA_RX_EOP | INCA_DMA_RX_SOP | INCA_DMA_RX_C);
|
|
#if 0
|
|
{
|
|
int i;
|
|
for (i=0;i<length - 4;i++) {
|
|
if (i % 16 == 0) printf("\n%04x: ", i);
|
|
printf("%02X ", NetRxPackets[rx_new][i]);
|
|
}
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
if (length)
|
|
{
|
|
#if 0
|
|
printf("Received %d bytes\n", length);
|
|
#endif
|
|
NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_new]),
|
|
length - 4);
|
|
}
|
|
else
|
|
{
|
|
#if 1
|
|
printf("Zero length!!!\n");
|
|
#endif
|
|
}
|
|
|
|
|
|
KSEG1ADDR(&rx_ring[rx_hold])->params.field.HOLD = 0;
|
|
|
|
rx_hold = rx_new;
|
|
|
|
rx_new = (rx_new + 1) % NUM_RX_DESC;
|
|
}
|
|
|
|
#if 0
|
|
printf("Leaving inca_switch_recv()\n");
|
|
#endif
|
|
|
|
return length;
|
|
}
|
|
|
|
|
|
static void inca_switch_halt(struct eth_device *dev)
|
|
{
|
|
#if 0
|
|
printf("Entered inca_switch_halt()\n");
|
|
#endif
|
|
|
|
#if 1
|
|
initialized = 0;
|
|
#endif
|
|
#if 1
|
|
/* Disable forwarding to the CPU port.
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
|
|
|
|
/* Close RxDMA channel.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
|
|
|
|
/* Close TxDMA channel.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_TXCCR0_OFF);
|
|
|
|
|
|
#endif
|
|
#if 0
|
|
printf("Leaving inca_switch_halt()\n");
|
|
#endif
|
|
}
|
|
|
|
|
|
static void inca_init_switch_chip(void)
|
|
{
|
|
u32 regValue;
|
|
|
|
/* To workaround a problem with collision counter
|
|
* (see Errata sheet).
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_PC_TX_CTL, 0x00000001);
|
|
SW_WRITE_REG(INCA_IP_Switch_LAN_TX_CTL, 0x00000001);
|
|
|
|
#if 1
|
|
/* init MDIO configuration:
|
|
MDS (Poll speed): 0x01 (4ms)
|
|
PHY_LAN_ADDR: 0x06
|
|
PHY_PC_ADDR: 0x05
|
|
UEP (Use External PHY): 0x00 (Internal PHY is used)
|
|
PS (Port Select): 0x00 (PT/UMM for LAN)
|
|
PT (PHY Test): 0x00 (no test mode)
|
|
UMM (Use MDIO Mode): 0x00 (state machine is disabled)
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_CFG, 0x4c50);
|
|
|
|
/* init PHY:
|
|
SL (Auto Neg. Speed for LAN)
|
|
SP (Auto Neg. Speed for PC)
|
|
LL (Link Status for LAN)
|
|
LP (Link Status for PC)
|
|
DL (Duplex Status for LAN)
|
|
DP (Duplex Status for PC)
|
|
PL (Auto Neg. Pause Status for LAN)
|
|
PP (Auto Neg. Pause Status for PC)
|
|
*/
|
|
SW_WRITE_REG (INCA_IP_Switch_EPHY, 0xff);
|
|
|
|
/* MDIO_ACC:
|
|
RA (Request/Ack) 0x01 (Request)
|
|
RW (Read/Write) 0x01 (Write)
|
|
PHY_ADDR 0x05 (PC)
|
|
REG_ADDR 0x00 (PHY_BCR: basic control register)
|
|
PHY_DATA 0x8000
|
|
Reset - software reset
|
|
LB (loop back) - normal
|
|
SS (speed select) - 10 Mbit/s
|
|
ANE (auto neg. enable) - disable
|
|
PD (power down) - normal
|
|
ISO (isolate) - normal
|
|
RAN (restart auto neg.) - normal
|
|
DM (duplex mode) - half duplex
|
|
CT (collision test) - enable
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0a08000);
|
|
|
|
/* MDIO_ACC:
|
|
RA (Request/Ack) 0x01 (Request)
|
|
RW (Read/Write) 0x01 (Write)
|
|
PHY_ADDR 0x06 (LAN)
|
|
REG_ADDR 0x00 (PHY_BCR: basic control register)
|
|
PHY_DATA 0x8000
|
|
Reset - software reset
|
|
LB (loop back) - normal
|
|
SS (speed select) - 10 Mbit/s
|
|
ANE (auto neg. enable) - disable
|
|
PD (power down) - normal
|
|
ISO (isolate) - normal
|
|
RAN (restart auto neg.) - normal
|
|
DM (duplex mode) - half duplex
|
|
CT (collision test) - enable
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_MDIO_ACC, 0xc0c08000);
|
|
#endif
|
|
|
|
/* Make sure the CPU port is disabled for now. We
|
|
* don't want packets to get stacked for us until
|
|
* we enable DMA and are prepared to receive them.
|
|
*/
|
|
SW_WRITE_REG(INCA_IP_Switch_ST_PT,0xf);
|
|
|
|
SW_READ_REG(INCA_IP_Switch_ARL_CTL, regValue);
|
|
|
|
/* CRC GEN is enabled.
|
|
*/
|
|
regValue |= 0x00000200;
|
|
SW_WRITE_REG(INCA_IP_Switch_ARL_CTL, regValue);
|
|
|
|
/* ADD TAG is disabled.
|
|
*/
|
|
SW_READ_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
|
|
regValue &= ~0x00000002;
|
|
SW_WRITE_REG(INCA_IP_Switch_PMAC_HD_CTL, regValue);
|
|
}
|
|
|
|
|
|
static void inca_dma_init(void)
|
|
{
|
|
/* Switch off all DMA channels.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXCCR1, INCA_IP_DMA_DMA_RXCCR1_OFF);
|
|
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR0, INCA_IP_DMA_DMA_RXCCR0_OFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR1, INCA_IP_DMA_DMA_TXCCR1_OFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXCCR2, INCA_IP_DMA_DMA_TXCCR2_OFF);
|
|
|
|
/* Setup TX channel polling time.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXPOLL, INCA_DMA_TX_POLLING_TIME);
|
|
|
|
/* Setup RX channel polling time.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXPOLL, INCA_DMA_RX_POLLING_TIME);
|
|
|
|
/* ERRATA: write reset value into the DMA RX IMR register.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXIMR, 0xFFFFFFFF);
|
|
|
|
/* Just in case: disable all transmit interrupts also.
|
|
*/
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXIMR, 0xFFFFFFFF);
|
|
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_TXISR, 0xFFFFFFFF);
|
|
DMA_WRITE_REG(INCA_IP_DMA_DMA_RXISR, 0xFFFFFFFF);
|
|
}
|
|
|
|
#endif
|
|
|
|
/* End of file.
|
|
*/
|
|
|
|
|