upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
362 lines
8.1 KiB
362 lines
8.1 KiB
/*
|
|
* Atmel SPI DataFlash support
|
|
*
|
|
* Copyright (C) 2008 Atmel Corporation
|
|
*/
|
|
#define DEBUG
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <spi_flash.h>
|
|
|
|
#include "spi_flash_internal.h"
|
|
|
|
/* AT45-specific commands */
|
|
#define CMD_AT45_READ_STATUS 0xd7
|
|
#define CMD_AT45_ERASE_PAGE 0x81
|
|
#define CMD_AT45_LOAD_PROG_BUF1 0x82
|
|
#define CMD_AT45_LOAD_BUF1 0x84
|
|
#define CMD_AT45_LOAD_PROG_BUF2 0x85
|
|
#define CMD_AT45_LOAD_BUF2 0x87
|
|
#define CMD_AT45_PROG_BUF1 0x88
|
|
#define CMD_AT45_PROG_BUF2 0x89
|
|
|
|
/* AT45 status register bits */
|
|
#define AT45_STATUS_P2_PAGE_SIZE (1 << 0)
|
|
#define AT45_STATUS_READY (1 << 7)
|
|
|
|
/* DataFlash family IDs, as obtained from the second idcode byte */
|
|
#define DF_FAMILY_AT26F 0
|
|
#define DF_FAMILY_AT45 1
|
|
#define DF_FAMILY_AT26DF 2 /* AT25DF and AT26DF */
|
|
|
|
struct atmel_spi_flash_params {
|
|
u8 idcode1;
|
|
/* Log2 of page size in power-of-two mode */
|
|
u8 l2_page_size;
|
|
u8 pages_per_block;
|
|
u8 blocks_per_sector;
|
|
u8 nr_sectors;
|
|
const char *name;
|
|
};
|
|
|
|
struct atmel_spi_flash {
|
|
const struct atmel_spi_flash_params *params;
|
|
struct spi_flash flash;
|
|
};
|
|
|
|
static inline struct atmel_spi_flash *
|
|
to_atmel_spi_flash(struct spi_flash *flash)
|
|
{
|
|
return container_of(flash, struct atmel_spi_flash, flash);
|
|
}
|
|
|
|
static const struct atmel_spi_flash_params atmel_spi_flash_table[] = {
|
|
{
|
|
.idcode1 = 0x28,
|
|
.l2_page_size = 10,
|
|
.pages_per_block = 8,
|
|
.blocks_per_sector = 32,
|
|
.nr_sectors = 32,
|
|
.name = "AT45DB642D",
|
|
},
|
|
};
|
|
|
|
static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout)
|
|
{
|
|
struct spi_slave *spi = flash->spi;
|
|
unsigned long timebase;
|
|
int ret;
|
|
u8 cmd = CMD_AT45_READ_STATUS;
|
|
u8 status;
|
|
|
|
timebase = get_timer(0);
|
|
|
|
ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN);
|
|
if (ret)
|
|
return -1;
|
|
|
|
do {
|
|
ret = spi_xfer(spi, 8, NULL, &status, 0);
|
|
if (ret)
|
|
return -1;
|
|
|
|
if (status & AT45_STATUS_READY)
|
|
break;
|
|
} while (get_timer(timebase) < timeout);
|
|
|
|
/* Deactivate CS */
|
|
spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
|
|
|
|
if (status & AT45_STATUS_READY)
|
|
return 0;
|
|
|
|
/* Timed out */
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* Assemble the address part of a command for AT45 devices in
|
|
* non-power-of-two page size mode.
|
|
*/
|
|
static void at45_build_address(struct atmel_spi_flash *asf, u8 *cmd, u32 offset)
|
|
{
|
|
unsigned long page_addr;
|
|
unsigned long byte_addr;
|
|
unsigned long page_size;
|
|
unsigned int page_shift;
|
|
|
|
/*
|
|
* The "extra" space per page is the power-of-two page size
|
|
* divided by 32.
|
|
*/
|
|
page_shift = asf->params->l2_page_size;
|
|
page_size = (1 << page_shift) + (1 << (page_shift - 5));
|
|
page_shift++;
|
|
page_addr = offset / page_size;
|
|
byte_addr = offset % page_size;
|
|
|
|
cmd[0] = page_addr >> (16 - page_shift);
|
|
cmd[1] = page_addr << (page_shift - 8) | (byte_addr >> 8);
|
|
cmd[2] = byte_addr;
|
|
}
|
|
|
|
static int dataflash_read_fast_p2(struct spi_flash *flash,
|
|
u32 offset, size_t len, void *buf)
|
|
{
|
|
u8 cmd[5];
|
|
|
|
cmd[0] = CMD_READ_ARRAY_FAST;
|
|
cmd[1] = offset >> 16;
|
|
cmd[2] = offset >> 8;
|
|
cmd[3] = offset;
|
|
cmd[4] = 0x00;
|
|
|
|
return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
|
|
}
|
|
|
|
static int dataflash_read_fast_at45(struct spi_flash *flash,
|
|
u32 offset, size_t len, void *buf)
|
|
{
|
|
struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
|
|
u8 cmd[5];
|
|
|
|
cmd[0] = CMD_READ_ARRAY_FAST;
|
|
at45_build_address(asf, cmd + 1, offset);
|
|
cmd[4] = 0x00;
|
|
|
|
return spi_flash_read_common(flash, cmd, sizeof(cmd), buf, len);
|
|
}
|
|
|
|
static int dataflash_write_at45(struct spi_flash *flash,
|
|
u32 offset, size_t len, const void *buf)
|
|
{
|
|
struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
|
|
unsigned long page_addr;
|
|
unsigned long byte_addr;
|
|
unsigned long page_size;
|
|
unsigned int page_shift;
|
|
size_t chunk_len;
|
|
size_t actual;
|
|
int ret;
|
|
u8 cmd[4];
|
|
|
|
page_shift = asf->params->l2_page_size;
|
|
page_size = (1 << page_shift) + (1 << (page_shift - 5));
|
|
page_shift++;
|
|
page_addr = offset / page_size;
|
|
byte_addr = offset % page_size;
|
|
|
|
ret = spi_claim_bus(flash->spi);
|
|
if (ret) {
|
|
debug("SF: Unable to claim SPI bus\n");
|
|
return ret;
|
|
}
|
|
|
|
for (actual = 0; actual < len; actual += chunk_len) {
|
|
chunk_len = min(len - actual, page_size - byte_addr);
|
|
|
|
/* Use the same address bits for both commands */
|
|
cmd[0] = CMD_AT45_LOAD_BUF1;
|
|
cmd[1] = page_addr >> (16 - page_shift);
|
|
cmd[2] = page_addr << (page_shift - 8) | (byte_addr >> 8);
|
|
cmd[3] = byte_addr;
|
|
|
|
ret = spi_flash_cmd_write(flash->spi, cmd, 4,
|
|
buf + actual, chunk_len);
|
|
if (ret < 0) {
|
|
debug("SF: Loading AT45 buffer failed\n");
|
|
goto out;
|
|
}
|
|
|
|
cmd[0] = CMD_AT45_PROG_BUF1;
|
|
ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
|
|
if (ret < 0) {
|
|
debug("SF: AT45 page programming failed\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = at45_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
|
|
if (ret < 0) {
|
|
debug("SF: AT45 page programming timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
page_addr++;
|
|
byte_addr = 0;
|
|
}
|
|
|
|
debug("SF: AT45: Successfully programmed %zu bytes @ 0x%x\n",
|
|
len, offset);
|
|
ret = 0;
|
|
|
|
out:
|
|
spi_release_bus(flash->spi);
|
|
return ret;
|
|
}
|
|
|
|
int dataflash_erase_at45(struct spi_flash *flash, u32 offset, size_t len)
|
|
{
|
|
struct atmel_spi_flash *asf = to_atmel_spi_flash(flash);
|
|
unsigned long page_addr;
|
|
unsigned long page_size;
|
|
unsigned int page_shift;
|
|
size_t actual;
|
|
int ret;
|
|
u8 cmd[4];
|
|
|
|
/*
|
|
* TODO: This function currently uses page erase only. We can
|
|
* probably speed things up by using block and/or sector erase
|
|
* when possible.
|
|
*/
|
|
|
|
page_shift = asf->params->l2_page_size;
|
|
page_size = (1 << page_shift) + (1 << (page_shift - 5));
|
|
page_shift++;
|
|
page_addr = offset / page_size;
|
|
|
|
if (offset % page_size || len % page_size) {
|
|
debug("SF: Erase offset/length not multiple of page size\n");
|
|
return -1;
|
|
}
|
|
|
|
cmd[0] = CMD_AT45_ERASE_PAGE;
|
|
cmd[3] = 0x00;
|
|
|
|
ret = spi_claim_bus(flash->spi);
|
|
if (ret) {
|
|
debug("SF: Unable to claim SPI bus\n");
|
|
return ret;
|
|
}
|
|
|
|
for (actual = 0; actual < len; actual += page_size) {
|
|
cmd[1] = page_addr >> (16 - page_shift);
|
|
cmd[2] = page_addr << (page_shift - 8);
|
|
|
|
ret = spi_flash_cmd_write(flash->spi, cmd, 4, NULL, 0);
|
|
if (ret < 0) {
|
|
debug("SF: AT45 page erase failed\n");
|
|
goto out;
|
|
}
|
|
|
|
ret = at45_wait_ready(flash, SPI_FLASH_PAGE_ERASE_TIMEOUT);
|
|
if (ret < 0) {
|
|
debug("SF: AT45 page erase timed out\n");
|
|
goto out;
|
|
}
|
|
|
|
page_addr++;
|
|
}
|
|
|
|
debug("SF: AT45: Successfully erased %zu bytes @ 0x%x\n",
|
|
len, offset);
|
|
ret = 0;
|
|
|
|
out:
|
|
spi_release_bus(flash->spi);
|
|
return ret;
|
|
}
|
|
|
|
struct spi_flash *spi_flash_probe_atmel(struct spi_slave *spi, u8 *idcode)
|
|
{
|
|
const struct atmel_spi_flash_params *params;
|
|
unsigned long page_size;
|
|
unsigned int family;
|
|
struct atmel_spi_flash *asf;
|
|
unsigned int i;
|
|
int ret;
|
|
u8 status;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) {
|
|
params = &atmel_spi_flash_table[i];
|
|
if (params->idcode1 == idcode[1])
|
|
break;
|
|
}
|
|
|
|
if (i == ARRAY_SIZE(atmel_spi_flash_table)) {
|
|
debug("SF: Unsupported DataFlash ID %02x\n",
|
|
idcode[1]);
|
|
return NULL;
|
|
}
|
|
|
|
asf = malloc(sizeof(struct atmel_spi_flash));
|
|
if (!asf) {
|
|
debug("SF: Failed to allocate memory\n");
|
|
return NULL;
|
|
}
|
|
|
|
asf->params = params;
|
|
asf->flash.spi = spi;
|
|
asf->flash.name = params->name;
|
|
|
|
/* Assuming power-of-two page size initially. */
|
|
page_size = 1 << params->l2_page_size;
|
|
|
|
family = idcode[1] >> 5;
|
|
|
|
switch (family) {
|
|
case DF_FAMILY_AT45:
|
|
/*
|
|
* AT45 chips have configurable page size. The status
|
|
* register indicates which configuration is active.
|
|
*/
|
|
ret = spi_flash_cmd(spi, CMD_AT45_READ_STATUS, &status, 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
debug("SF: AT45 status register: %02x\n", status);
|
|
|
|
if (!(status & AT45_STATUS_P2_PAGE_SIZE)) {
|
|
asf->flash.read = dataflash_read_fast_at45;
|
|
asf->flash.write = dataflash_write_at45;
|
|
asf->flash.erase = dataflash_erase_at45;
|
|
page_size += 1 << (params->l2_page_size - 5);
|
|
} else {
|
|
asf->flash.read = dataflash_read_fast_p2;
|
|
}
|
|
|
|
break;
|
|
|
|
case DF_FAMILY_AT26F:
|
|
case DF_FAMILY_AT26DF:
|
|
asf->flash.read = dataflash_read_fast_p2;
|
|
break;
|
|
|
|
default:
|
|
debug("SF: Unsupported DataFlash family %u\n", family);
|
|
goto err;
|
|
}
|
|
|
|
asf->flash.size = page_size * params->pages_per_block
|
|
* params->blocks_per_sector
|
|
* params->nr_sectors;
|
|
|
|
debug("SF: Detected %s with page size %lu, total %u bytes\n",
|
|
params->name, page_size, asf->flash.size);
|
|
|
|
return &asf->flash;
|
|
|
|
err:
|
|
free(asf);
|
|
return NULL;
|
|
}
|
|
|