upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/esd/vme8349/vme8349.c

204 lines
4.7 KiB

/*
* vme8349.c -- esd VME8349 board support
*
* Copyright (c) 2008-2009 esd gmbh.
*
* (C) Copyright 2006
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <ioports.h>
#include <mpc83xx.h>
#include <asm/mpc8349_pci.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#include <asm/io.h>
#include <asm/mmu.h>
#include <spd.h>
#include <spd_sdram.h>
#include <i2c.h>
#include <netdev.h>
void ddr_enable_ecc(unsigned int dram_size);
phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
return -1;
/* DDR SDRAM - Main memory */
im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR;
msize = spd_sdram();
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/*
* Initialize and enable DDR ECC.
*/
ddr_enable_ecc(msize * 1024 * 1024);
#endif
/* Now check memory size (after ECC is initialized) */
msize = get_ram_size(0, msize);
/* return total bus SDRAM size(bytes) -- DDR */
return msize * 1024 * 1024;
}
int checkboard(void)
{
#ifdef VME_CADDY2
puts("Board: esd VME-CADDY/2\n");
#else
puts("Board: esd VME-CPU/8349\n");
#endif
return 0;
}
#ifdef VME_CADDY2
int board_eth_init(bd_t *bis)
{
return pci_eth_init(bis);
}
#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
}
#endif
int misc_init_r()
{
immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
clrsetbits_be32(&im->im_lbc.lcrr, LBCR_LDIS, 0);
return 0;
}
/*
* Provide SPD values for spd_sdram(). Both boards (VME-CADDY/2
* and VME-CADDY/2) have different SDRAM configurations.
*/
#ifdef VME_CADDY2
#define SMALL_RAM 0xff
#define LARGE_RAM 0x00
#else
#define SMALL_RAM 0x00
#define LARGE_RAM 0xff
#endif
#define SPD_VAL(a, b) (((a) & SMALL_RAM) | ((b) & LARGE_RAM))
static spd_eeprom_t default_spd_eeprom = {
SPD_VAL(0x80, 0x80), /* 00 use 128 Bytes */
SPD_VAL(0x07, 0x07), /* 01 use 128 Bytes */
SPD_MEMTYPE_DDR2, /* 02 type is DDR2 */
SPD_VAL(0x0d, 0x0d), /* 03 rows: 13 */
SPD_VAL(0x09, 0x0a), /* 04 cols: 9 / 10 */
SPD_VAL(0x00, 0x00), /* 05 */
SPD_VAL(0x40, 0x40), /* 06 */
SPD_VAL(0x00, 0x00), /* 07 */
SPD_VAL(0x05, 0x05), /* 08 */
SPD_VAL(0x30, 0x30), /* 09 */
SPD_VAL(0x45, 0x45), /* 10 */
SPD_VAL(0x02, 0x02), /* 11 ecc used */
SPD_VAL(0x82, 0x82), /* 12 */
SPD_VAL(0x10, 0x10), /* 13 */
SPD_VAL(0x08, 0x08), /* 14 */
SPD_VAL(0x00, 0x00), /* 15 */
SPD_VAL(0x0c, 0x0c), /* 16 */
SPD_VAL(0x04, 0x08), /* 17 banks: 4 / 8 */
SPD_VAL(0x38, 0x38), /* 18 */
SPD_VAL(0x00, 0x00), /* 19 */
SPD_VAL(0x02, 0x02), /* 20 */
SPD_VAL(0x00, 0x00), /* 21 */
SPD_VAL(0x03, 0x03), /* 22 */
SPD_VAL(0x3d, 0x3d), /* 23 */
SPD_VAL(0x45, 0x45), /* 24 */
SPD_VAL(0x50, 0x50), /* 25 */
SPD_VAL(0x45, 0x45), /* 26 */
SPD_VAL(0x3c, 0x3c), /* 27 */
SPD_VAL(0x28, 0x28), /* 28 */
SPD_VAL(0x3c, 0x3c), /* 29 */
SPD_VAL(0x2d, 0x2d), /* 30 */
SPD_VAL(0x20, 0x80), /* 31 */
SPD_VAL(0x20, 0x20), /* 32 */
SPD_VAL(0x27, 0x27), /* 33 */
SPD_VAL(0x10, 0x10), /* 34 */
SPD_VAL(0x17, 0x17), /* 35 */
SPD_VAL(0x3c, 0x3c), /* 36 */
SPD_VAL(0x1e, 0x1e), /* 37 */
SPD_VAL(0x1e, 0x1e), /* 38 */
SPD_VAL(0x00, 0x00), /* 39 */
SPD_VAL(0x00, 0x06), /* 40 */
SPD_VAL(0x37, 0x37), /* 41 */
SPD_VAL(0x4b, 0x7f), /* 42 */
SPD_VAL(0x80, 0x80), /* 43 */
SPD_VAL(0x18, 0x18), /* 44 */
SPD_VAL(0x22, 0x22), /* 45 */
SPD_VAL(0x00, 0x00), /* 46 */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
SPD_VAL(0x10, 0x10), /* 62 */
SPD_VAL(0x7e, 0x1d), /* 63 */
{ 'e', 's', 'd', '-', 'g', 'm', 'b', 'h' },
SPD_VAL(0x00, 0x00), /* 72 */
#ifdef VME_CADDY2
{ "vme-caddy/2 ram " }
#else
{ "vme-cpu/2 ram " }
#endif
};
int vme8349_read_spd(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
int old_bus = i2c_get_bus_num();
unsigned int l, sum;
int valid = 0;
i2c_set_bus_num(0);
if (i2c_read(chip, addr, alen, buffer, len) == 0)
if (memcmp(&buffer[64], &default_spd_eeprom.mid[0], 8) == 0) {
sum = 0;
for (l = 0; l < 63; l++)
sum = (sum + buffer[l]) & 0xff;
if (sum == buffer[63])
valid = 1;
else
printf("Invalid checksum in EEPROM %02x %02x\n",
sum, buffer[63]);
}
if (valid == 0) {
memcpy(buffer, (void *)&default_spd_eeprom, len);
sum = 0;
for (l = 0; l < 63; l++)
sum = (sum + buffer[l]) & 0xff;
if (sum != buffer[63])
printf("Invalid checksum in FLASH %02x %02x\n",
sum, buffer[63]);
buffer[63] = sum;
}
i2c_set_bus_num(old_bus);
return 0;
}