upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/prodrive/pdnb3/nand.c

129 lines
3.0 KiB

/*
* (C) Copyright 2006
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#if defined(CONFIG_CMD_NAND)
#include <nand.h>
struct pdnb3_ndfc_regs {
uchar cmd;
uchar wait;
uchar addr;
uchar term;
uchar data;
};
static u8 hwctl;
static struct pdnb3_ndfc_regs *pdnb3_ndfc;
#define readb(addr) *(volatile u_char *)(addr)
#define readl(addr) *(volatile u_long *)(addr)
#define writeb(d,addr) *(volatile u_char *)(addr) = (d)
/*
* The PDNB3 has a NAND Flash Controller (NDFC) that handles all accesses to
* the NAND devices. The NDFC has command, address and data registers that
* when accessed will set up the NAND flash pins appropriately. We'll use the
* hwcontrol function to save the configuration in a global variable.
* We can then use this information in the read and write functions to
* determine which NDFC register to access.
*
* There is one NAND devices on the board, a Hynix HY27US08561A (32 MByte).
*/
static void pdnb3_nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_CLE )
hwctl |= 0x1;
else
hwctl &= ~0x1;
if ( ctrl & NAND_ALE )
hwctl |= 0x2;
else
hwctl &= ~0x2;
if ( (ctrl & NAND_NCE) != NAND_NCE)
writeb(0x00, &(pdnb3_ndfc->term));
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
static u_char pdnb3_nand_read_byte(struct mtd_info *mtd)
{
return readb(&(pdnb3_ndfc->data));
}
static void pdnb3_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++) {
if (hwctl & 0x1)
writeb(buf[i], &(pdnb3_ndfc->cmd));
else if (hwctl & 0x2)
writeb(buf[i], &(pdnb3_ndfc->addr));
else
writeb(buf[i], &(pdnb3_ndfc->data));
}
}
static void pdnb3_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++)
buf[i] = readb(&(pdnb3_ndfc->data));
}
static int pdnb3_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
for (i = 0; i < len; i++)
if (buf[i] != readb(&(pdnb3_ndfc->data)))
return i;
return 0;
}
static int pdnb3_nand_dev_ready(struct mtd_info *mtd)
{
/*
* Blocking read to wait for NAND to be ready
*/
readb(&(pdnb3_ndfc->wait));
/*
* Return always true
*/
return 1;
}
int board_nand_init(struct nand_chip *nand)
{
pdnb3_ndfc = (struct pdnb3_ndfc_regs *)CONFIG_SYS_NAND_BASE;
nand->ecc.mode = NAND_ECC_SOFT;
/* Set address of NAND IO lines (Using Linear Data Access Region) */
nand->IO_ADDR_R = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
nand->IO_ADDR_W = (void __iomem *) ((ulong) pdnb3_ndfc + 0x4);
/* Reference hardware control function */
nand->cmd_ctrl = pdnb3_nand_hwcontrol;
nand->read_byte = pdnb3_nand_read_byte;
nand->write_buf = pdnb3_nand_write_buf;
nand->read_buf = pdnb3_nand_read_buf;
nand->verify_buf = pdnb3_nand_verify_buf;
nand->dev_ready = pdnb3_nand_dev_ready;
return 0;
}
#endif