upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/redwood.h

173 lines
6.4 KiB

/*
* Configuration for AMCC 460SX Ref (redwood)
*
* (C) Copyright 2008
* Feng Kan, Applied Micro Circuits Corp., fkan@amcc.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
#define CONFIG_440 1 /* ... PPC460 family */
#define CONFIG_460SX 1 /* ... PPC460 family */
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
#define CONFIG_SYS_TEXT_BASE 0xfffb0000
/*-----------------------------------------------------------------------
* Include common defines/options for all AMCC boards
*----------------------------------------------------------------------*/
#define CONFIG_HOSTNAME redwood
#include "amcc-common.h"
#define CONFIG_SYS_CLK_FREQ 33333333 /* external freq to pll */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
#define CONFIG_SYS_FLASH_BASE 0xfff00000 /* start of FLASH */
#define CONFIG_SYS_ISRAM_BASE 0x90000000 /* internal SRAM */
#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
#define CONFIG_SYS_PCIE_MEMBASE 0x90000000 /* mapped PCIe memory */
#define CONFIG_SYS_PCIE0_MEMBASE 0x90000000 /* mapped PCIe memory */
#define CONFIG_SYS_PCIE1_MEMBASE 0xa0000000 /* mapped PCIe memory */
#define CONFIG_SYS_PCIE_MEMSIZE 0x01000000
#define CONFIG_SYS_PCIE0_XCFGBASE 0xb0000000
#define CONFIG_SYS_PCIE1_XCFGBASE 0xb2000000
#define CONFIG_SYS_PCIE2_XCFGBASE 0xb4000000
#define CONFIG_SYS_PCIE0_CFGBASE 0xb6000000
#define CONFIG_SYS_PCIE1_CFGBASE 0xb8000000
#define CONFIG_SYS_PCIE2_CFGBASE 0xba000000
/* PCIe mapped UTL registers */
#define CONFIG_SYS_PCIE0_REGBASE 0xd0000000
#define CONFIG_SYS_PCIE1_REGBASE 0xd0010000
#define CONFIG_SYS_PCIE2_REGBASE 0xd0020000
/* System RAM mapped to PCI space */
#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
#define CONFIG_SYS_FPGA_BASE 0xe2000000 /* epld */
#define CONFIG_SYS_OPER_FLASH 0xe7000000 /* SRAM - OPER Flash */
/*
* Serial Port
*/
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
/*-----------------------------------------------------------------------
* Initial RAM & stack pointer (placed in internal SRAM)
*----------------------------------------------------------------------*/
#define CONFIG_SYS_TEMP_STACK_OCM 1
#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
/*-----------------------------------------------------------------------
* DDR SDRAM
*----------------------------------------------------------------------*/
#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
#define CONFIG_DDR_ECC 1 /* with ECC support */
#define CONFIG_SYS_SPD_MAX_DIMMS 2
/* SPD i2c spd addresses */
#define SPD_EEPROM_ADDRESS {IIC0_DIMM0_ADDR, IIC0_DIMM1_ADDR}
#define IIC0_DIMM0_ADDR 0x53
#define IIC0_DIMM1_ADDR 0x52
/*-----------------------------------------------------------------------
* I2C
*----------------------------------------------------------------------*/
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
#define IIC0_BOOTPROM_ADDR 0x50
#define IIC0_ALT_BOOTPROM_ADDR 0x54
/* Don't probe these addrs */
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x50}, {0, 0x52}, {0, 0x53}, {0, 0x54} }
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
/*-----------------------------------------------------------------------
* Environment
*----------------------------------------------------------------------*/
#undef CONFIG_ENV_IS_IN_NVRAM /* ... not in NVRAM */
#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment uses flash */
#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_AMCC_DEF_ENV \
CONFIG_AMCC_DEF_ENV_POWERPC \
CONFIG_AMCC_DEF_ENV_NOR_UPD \
CONFIG_AMCC_DEF_ENV_NAND_UPD \
"kernel_addr=fc000000\0" \
"fdt_addr=fc1e0000\0" \
"ramdisk_addr=fc200000\0" \
""
/*----------------------------------------------------------------------------+
| Commands in addition to amcc-common.h
+----------------------------------------------------------------------------*/
#define CONFIG_CMD_SDRAM
#define CONFIG_BOOTCOMMAND "run flash_self"
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
#define CONFIG_PHY_RESET_DELAY 1000
#define CONFIG_M88E1141_PHY 1 /* Enable phy */
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
#define CONFIG_PHY_ADDR 0 /* PHY address, See schematics */
#define CONFIG_PHY1_ADDR 1 /* PHY address, See schematics */
#undef CONFIG_WATCHDOG /* watchdog disabled */
/*-----------------------------------------------------------------------
* FLASH related
*----------------------------------------------------------------------*/
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
#define CONFIG_SYS_MAX_FLASH_BANKS 3 /* number of banks */
#define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */
#undef CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CONFIG_ENV_ADDR 0xfffa0000
#define CONFIG_ENV_SIZE 0x10000 /* Size of Environment vars */
#endif /* CONFIG_ENV_IS_IN_FLASH */
/*---------------------------------------------------------------------------*/
#endif /* __CONFIG_H */