upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
396 lines
12 KiB
396 lines
12 KiB
/*
|
|
* Configuation settings for the Freescale MCF54455 EVB board.
|
|
*
|
|
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef _M54455EVB_H
|
|
#define _M54455EVB_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_M54455EVB /* M54455EVB board */
|
|
|
|
#define CONFIG_MCFUART
|
|
#define CONFIG_SYS_UART_PORT (0)
|
|
|
|
#define LDS_BOARD_TEXT board/freescale/m54455evb/sbf_dram_init.o (.text*)
|
|
|
|
#undef CONFIG_WATCHDOG
|
|
|
|
#define CONFIG_TIMESTAMP /* Print image info with timestamp */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
/* Network configuration */
|
|
#define CONFIG_MCFFEC
|
|
#ifdef CONFIG_MCFFEC
|
|
# define CONFIG_MII 1
|
|
# define CONFIG_MII_INIT 1
|
|
# define CONFIG_SYS_DISCOVER_PHY
|
|
# define CONFIG_SYS_RX_ETH_BUFFER 8
|
|
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
|
|
# define CONFIG_SYS_FEC0_PINMUX 0
|
|
# define CONFIG_SYS_FEC1_PINMUX 0
|
|
# define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
|
|
# define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC0_IOBASE
|
|
# define MCFFEC_TOUT_LOOP 50000
|
|
# define CONFIG_HAS_ETH1
|
|
|
|
# define CONFIG_ETHPRIME "FEC0"
|
|
# define CONFIG_IPADDR 192.162.1.2
|
|
# define CONFIG_NETMASK 255.255.255.0
|
|
# define CONFIG_SERVERIP 192.162.1.1
|
|
# define CONFIG_GATEWAYIP 192.162.1.1
|
|
|
|
/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
|
|
# ifndef CONFIG_SYS_DISCOVER_PHY
|
|
# define FECDUPLEX FULL
|
|
# define FECSPEED _100BASET
|
|
# else
|
|
# ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
# endif
|
|
# endif /* CONFIG_SYS_DISCOVER_PHY */
|
|
#endif
|
|
|
|
#define CONFIG_HOSTNAME M54455EVB
|
|
#ifdef CONFIG_SYS_STMICRO_BOOT
|
|
/* ST Micro serial flash */
|
|
#define CONFIG_SYS_LOAD_ADDR2 0x40010013
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
|
|
"loadaddr=0x40010000\0" \
|
|
"sbfhdr=sbfhdr.bin\0" \
|
|
"uboot=u-boot.bin\0" \
|
|
"load=tftp ${loadaddr} ${sbfhdr};" \
|
|
"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0" \
|
|
"upd=run load; run prog\0" \
|
|
"prog=sf probe 0:1 1000000 3;" \
|
|
"sf erase 0 30000;" \
|
|
"sf write ${loadaddr} 0 0x30000;" \
|
|
"save\0" \
|
|
""
|
|
#else
|
|
/* Atmel and Intel */
|
|
#ifdef CONFIG_SYS_ATMEL_BOOT
|
|
# define CONFIG_SYS_UBOOT_END 0x0403FFFF
|
|
#elif defined(CONFIG_SYS_INTEL_BOOT)
|
|
# define CONFIG_SYS_UBOOT_END 0x3FFFF
|
|
#endif
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0" \
|
|
"loadaddr=0x40010000\0" \
|
|
"uboot=u-boot.bin\0" \
|
|
"load=tftp ${loadaddr} ${uboot}\0" \
|
|
"upd=run load; run prog\0" \
|
|
"prog=prot off " __stringify(CONFIG_SYS_FLASH_BASE) \
|
|
" " __stringify(CONFIG_SYS_UBOOT_END) ";" \
|
|
"era " __stringify(CONFIG_SYS_FLASH_BASE) " " \
|
|
__stringify(CONFIG_SYS_UBOOT_END) ";" \
|
|
"cp.b ${loadaddr} " __stringify(CONFIG_SYS_FLASH_BASE) \
|
|
" ${filesize}; save\0" \
|
|
""
|
|
#endif
|
|
|
|
/* ATA configuration */
|
|
#define CONFIG_IDE_RESET 1
|
|
#define CONFIG_IDE_PREINIT 1
|
|
#define CONFIG_ATAPI
|
|
#undef CONFIG_LBA48
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 2
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR 0x90000000
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0
|
|
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */
|
|
|
|
/* Realtime clock */
|
|
#define CONFIG_MCFRTC
|
|
#undef RTC_DEBUG
|
|
#define CONFIG_SYS_RTC_OSCILLATOR (32 * CONFIG_SYS_HZ)
|
|
|
|
/* Timer */
|
|
#define CONFIG_MCFTMR
|
|
#undef CONFIG_MCFPIT
|
|
|
|
/* I2c */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 80000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x58000
|
|
#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
|
|
|
|
/* DSPI and Serial Flash */
|
|
#define CONFIG_CF_DSPI
|
|
#define CONFIG_HARD_SPI
|
|
#define CONFIG_SYS_SBFHDR_SIZE 0x13
|
|
#ifdef CONFIG_CMD_SPI
|
|
|
|
# define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \
|
|
DSPI_CTAR_PCSSCK_1CLK | \
|
|
DSPI_CTAR_PASC(0) | \
|
|
DSPI_CTAR_PDT(0) | \
|
|
DSPI_CTAR_CSSCK(0) | \
|
|
DSPI_CTAR_ASC(0) | \
|
|
DSPI_CTAR_DT(1))
|
|
#endif
|
|
|
|
/* PCI */
|
|
#ifdef CONFIG_CMD_PCI
|
|
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
|
|
|
|
#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 4
|
|
|
|
#define CONFIG_SYS_PCI_MEM_BUS 0xA0000000
|
|
#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BUS
|
|
#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_SYS_PCI_IO_BUS 0xB1000000
|
|
#define CONFIG_SYS_PCI_IO_PHYS CONFIG_SYS_PCI_IO_BUS
|
|
#define CONFIG_SYS_PCI_IO_SIZE 0x01000000
|
|
|
|
#define CONFIG_SYS_PCI_CFG_BUS 0xB0000000
|
|
#define CONFIG_SYS_PCI_CFG_PHYS CONFIG_SYS_PCI_CFG_BUS
|
|
#define CONFIG_SYS_PCI_CFG_SIZE 0x01000000
|
|
#endif
|
|
|
|
/* FPGA - Spartan 2 */
|
|
/* experiment
|
|
#define CONFIG_FPGA_COUNT 1
|
|
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
|
|
#define CONFIG_SYS_FPGA_CHECK_CTRLC
|
|
*/
|
|
|
|
/* Input, PCI, Flexbus, and VCO */
|
|
#define CONFIG_EXTRA_CLOCK
|
|
|
|
#define CONFIG_PRAM 2048 /* 2048 KB */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
|
|
|
|
#define CONFIG_SYS_MBAR 0xFC000000
|
|
|
|
/*
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000 /* Size of used area in internal SRAM */
|
|
#define CONFIG_SYS_INIT_RAM_CTRL 0x221
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 32)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
#define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x40000000
|
|
#define CONFIG_SYS_SDRAM_BASE1 0x48000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 256 /* SDRAM size in MB */
|
|
#define CONFIG_SYS_SDRAM_CFG1 0x65311610
|
|
#define CONFIG_SYS_SDRAM_CFG2 0x59670000
|
|
#define CONFIG_SYS_SDRAM_CTRL 0xEA0B2000
|
|
#define CONFIG_SYS_SDRAM_EMOD 0x40010000
|
|
#define CONFIG_SYS_SDRAM_MODE 0x00010033
|
|
#define CONFIG_SYS_SDRAM_DRV_STRENGTH 0xAA
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400
|
|
#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
|
|
|
|
#ifdef CONFIG_CF_SBF
|
|
# define CONFIG_SERIAL_BOOT
|
|
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
|
|
#else
|
|
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
|
|
#endif
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
|
|
/* Reserve 256 kB for malloc() */
|
|
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization ??
|
|
*/
|
|
/* Initial Memory map for Linux */
|
|
#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
|
|
|
|
/*
|
|
* Configuration for environment
|
|
* Environment is not embedded in u-boot. First time runing may have env
|
|
* crc error warning if there is no correct environment on the flash.
|
|
*/
|
|
#ifdef CONFIG_CF_SBF
|
|
# define CONFIG_ENV_SPI_CS 1
|
|
#endif
|
|
#undef CONFIG_ENV_OVERWRITE
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#ifdef CONFIG_SYS_STMICRO_BOOT
|
|
# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
|
|
# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS1_BASE
|
|
# define CONFIG_ENV_OFFSET 0x30000
|
|
# define CONFIG_ENV_SIZE 0x2000
|
|
# define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#endif
|
|
#ifdef CONFIG_SYS_ATMEL_BOOT
|
|
# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
|
|
# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
|
|
# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
|
|
# define CONFIG_ENV_SIZE 0x2000
|
|
# define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#endif
|
|
#ifdef CONFIG_SYS_INTEL_BOOT
|
|
# define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
|
|
# define CONFIG_SYS_FLASH0_BASE CONFIG_SYS_CS0_BASE
|
|
# define CONFIG_SYS_FLASH1_BASE CONFIG_SYS_CS1_BASE
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000)
|
|
# define CONFIG_ENV_SIZE 0x2000
|
|
# define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#endif
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#ifdef CONFIG_SYS_FLASH_CFI
|
|
|
|
# define CONFIG_FLASH_CFI_DRIVER 1
|
|
# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
|
|
# define CONFIG_SYS_FLASH_SIZE 0x1000000 /* Max size that the board might have */
|
|
# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
|
|
# define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
# define CONFIG_SYS_MAX_FLASH_SECT 137 /* max number of sectors on one chip */
|
|
# define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */
|
|
# define CONFIG_SYS_FLASH_CHECKSUM
|
|
# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_CS0_BASE, CONFIG_SYS_CS1_BASE }
|
|
# define CONFIG_FLASH_CFI_LEGACY
|
|
|
|
#ifdef CONFIG_FLASH_CFI_LEGACY
|
|
# define CONFIG_SYS_ATMEL_REGION 4
|
|
# define CONFIG_SYS_ATMEL_TOTALSECT 11
|
|
# define CONFIG_SYS_ATMEL_SECT {1, 2, 1, 7}
|
|
# define CONFIG_SYS_ATMEL_SECTSZ {0x4000, 0x2000, 0x8000, 0x10000}
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* This is setting for JFFS2 support in u-boot.
|
|
* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
|
|
*/
|
|
#ifdef CONFIG_CMD_JFFS2
|
|
#ifdef CF_STMICRO_BOOT
|
|
# define CONFIG_JFFS2_DEV "nor1"
|
|
# define CONFIG_JFFS2_PART_SIZE 0x01000000
|
|
# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH2_BASE + 0x500000)
|
|
#endif
|
|
#ifdef CONFIG_SYS_ATMEL_BOOT
|
|
# define CONFIG_JFFS2_DEV "nor1"
|
|
# define CONFIG_JFFS2_PART_SIZE 0x01000000
|
|
# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH1_BASE + 0x500000)
|
|
#endif
|
|
#ifdef CONFIG_SYS_INTEL_BOOT
|
|
# define CONFIG_JFFS2_DEV "nor0"
|
|
# define CONFIG_JFFS2_PART_SIZE (0x01000000 - 0x500000)
|
|
# define CONFIG_JFFS2_PART_OFFSET (CONFIG_SYS_FLASH0_BASE + 0x500000)
|
|
#endif
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 16
|
|
|
|
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 8)
|
|
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 4)
|
|
#define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA)
|
|
#define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA)
|
|
#define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \
|
|
CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
|
|
CF_ACR_EN | CF_ACR_SM_ALL)
|
|
#define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \
|
|
CF_CACR_ICINVA | CF_CACR_EUSP)
|
|
#define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \
|
|
CF_CACR_DEC | CF_CACR_DDCM_P | \
|
|
CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory bank definitions
|
|
*/
|
|
/*
|
|
* CS0 - NOR Flash 1, 2, 4, or 8MB
|
|
* CS1 - CompactFlash and registers
|
|
* CS2 - CPLD
|
|
* CS3 - FPGA
|
|
* CS4 - Available
|
|
* CS5 - Available
|
|
*/
|
|
|
|
#if defined(CONFIG_SYS_ATMEL_BOOT) || defined(CONFIG_SYS_STMICRO_BOOT)
|
|
/* Atmel Flash */
|
|
#define CONFIG_SYS_CS0_BASE 0x04000000
|
|
#define CONFIG_SYS_CS0_MASK 0x00070001
|
|
#define CONFIG_SYS_CS0_CTRL 0x00001140
|
|
/* Intel Flash */
|
|
#define CONFIG_SYS_CS1_BASE 0x00000000
|
|
#define CONFIG_SYS_CS1_MASK 0x01FF0001
|
|
#define CONFIG_SYS_CS1_CTRL 0x00000D60
|
|
|
|
#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS0_BASE
|
|
#else
|
|
/* Intel Flash */
|
|
#define CONFIG_SYS_CS0_BASE 0x00000000
|
|
#define CONFIG_SYS_CS0_MASK 0x01FF0001
|
|
#define CONFIG_SYS_CS0_CTRL 0x00000D60
|
|
/* Atmel Flash */
|
|
#define CONFIG_SYS_CS1_BASE 0x04000000
|
|
#define CONFIG_SYS_CS1_MASK 0x00070001
|
|
#define CONFIG_SYS_CS1_CTRL 0x00001140
|
|
|
|
#define CONFIG_SYS_ATMEL_BASE CONFIG_SYS_CS1_BASE
|
|
#endif
|
|
|
|
/* CPLD */
|
|
#define CONFIG_SYS_CS2_BASE 0x08000000
|
|
#define CONFIG_SYS_CS2_MASK 0x00070001
|
|
#define CONFIG_SYS_CS2_CTRL 0x003f1140
|
|
|
|
/* FPGA */
|
|
#define CONFIG_SYS_CS3_BASE 0x09000000
|
|
#define CONFIG_SYS_CS3_MASK 0x00070001
|
|
#define CONFIG_SYS_CS3_CTRL 0x00000020
|
|
|
|
#endif /* _M54455EVB_H */
|
|
|