upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
118 lines
3.0 KiB
118 lines
3.0 KiB
/*
|
|
* Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/mx31.h>
|
|
#include <asm/arch/mx31-regs.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int dram_init (void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_init (void)
|
|
{
|
|
int i;
|
|
|
|
/* CS0: Nor Flash */
|
|
/*
|
|
* CS0L and CS0A values are from the RedBoot sources by Freescale
|
|
* and are also equal to those used by Sascha Hauer for the Phytec
|
|
* i.MX31 board. CS0U is just a slightly optimized hardware default:
|
|
* the only non-zero field "Wait State Control" is set to half the
|
|
* default value.
|
|
*/
|
|
__REG(CSCR_U(0)) = 0x00000f00;
|
|
__REG(CSCR_L(0)) = 0x10000D03;
|
|
__REG(CSCR_A(0)) = 0x00720900;
|
|
|
|
/* setup pins for UART1 */
|
|
mx31_gpio_mux(MUX_RXD1__UART1_RXD_MUX);
|
|
mx31_gpio_mux(MUX_TXD1__UART1_TXD_MUX);
|
|
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
|
|
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
|
|
|
|
/* SPI2 */
|
|
mx31_gpio_mux(MUX_CSPI2_SS2__CSPI2_SS2_B);
|
|
mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
|
|
mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
|
|
mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
|
|
mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
|
|
mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
|
|
mx31_gpio_mux(MUX_CSPI2_SS1__CSPI2_SS1_B);
|
|
|
|
/* start SPI2 clock */
|
|
__REG(CCM_CGR2) = __REG(CCM_CGR2) | (3 << 4);
|
|
|
|
/* PBC setup */
|
|
/* Enable UART transceivers also reset the Ethernet/external UART */
|
|
readw(CS4_BASE + 4);
|
|
|
|
writew(0x8023, CS4_BASE + 4);
|
|
|
|
/* RedBoot also has an empty loop with 100000 iterations here -
|
|
* clock doesn't run yet */
|
|
for (i = 0; i < 100000; i++)
|
|
;
|
|
|
|
/* Clear the reset, toggle the LEDs */
|
|
writew(0xDF, CS4_BASE + 6);
|
|
|
|
/* clock still doesn't run */
|
|
for (i = 0; i < 100000; i++)
|
|
;
|
|
|
|
/* See 1.5.4 in IMX31ADSE_PERI_BUS_CNTRL_CPLD_RM.pdf */
|
|
readb(CS4_BASE + 8);
|
|
readb(CS4_BASE + 7);
|
|
readb(CS4_BASE + 8);
|
|
readb(CS4_BASE + 7);
|
|
|
|
gd->bd->bi_arch_number = MACH_TYPE_MX31ADS; /* board id for linux */
|
|
gd->bd->bi_boot_params = 0x80000100; /* adress of boot parameters */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
printf("Board: MX31ADS\n");
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_NET
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_CS8900
|
|
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
|
|
#endif
|
|
return rc;
|
|
}
|
|
#endif
|
|
|