upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/mpc512x.h

407 lines
12 KiB

/*
* Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
* (C) Copyright 2007 DENX Software Engineering
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* Derived from the MPC83xx header.
*/
#ifndef __MPC512X_H__
#define __MPC512X_H__
#include <config.h>
#if defined(CONFIG_E300)
#include <asm/e300.h>
#endif
/* System reset offset (PowerPC standard)
*/
#define EXC_OFF_SYS_RESET 0x0100
#define _START_OFFSET EXC_OFF_SYS_RESET
/* IMMRBAR - Internal Memory Register Base Address
*/
#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */
#define IMMRBAR 0x0000 /* Register offset to immr */
#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */
#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR)
/* LAWBAR - Local Access Window Base Address Register
*/
#define LPBAW 0x0020 /* Register offset to immr */
#define LPCS0AW 0x0024
#define LPCS1AW 0x0028
#define LPCS2AW 0x002C
#define LPCS3AW 0x0030
#define LPCS4AW 0x0034
#define LPCS5AW 0x0038
#define LPCS6AW 0x003C
#define LPCA7AW 0x0040
#define SRAMBAR 0x00C4
#define LPC_OFFSET 0x10000
#define CS0_CONFIG 0x00000
#define CS1_CONFIG 0x00004
#define CS2_CONFIG 0x00008
#define CS3_CONFIG 0x0000C
#define CS4_CONFIG 0x00010
#define CS5_CONFIG 0x00014
#define CS6_CONFIG 0x00018
#define CS7_CONFIG 0x0001C
#define CS_CTRL 0x00020
#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */
#define CS_CTRL_IE 0x08000000 /* CS Interrupt Enable bit */
/* SPRIDR - System Part and Revision ID Register
*/
#define SPRIDR_PARTID 0xFFFF0000 /* Part Identification */
#define SPRIDR_REVID 0x0000FFFF /* Revision Identification */
#define SPR_5121E 0x80180000
/* SPCR - System Priority Configuration Register
*/
#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */
#define SPCR_PCIHPE_SHIFT (31-3)
#define SPCR_PCIPR 0x03000000 /* PCI bridge system bus request priority */
#define SPCR_PCIPR_SHIFT (31-7)
#define SPCR_TBEN 0x00400000 /* E300 PowerPC core time base unit enable */
#define SPCR_TBEN_SHIFT (31-9)
#define SPCR_COREPR 0x00300000 /* E300 PowerPC Core system bus request priority */
#define SPCR_COREPR_SHIFT (31-11)
/* SWCRR - System Watchdog Control Register
*/
#define SWCRR 0x0904 /* Register offset to immr */
#define SWCRR_SWTC 0xFFFF0000 /* Software Watchdog Time Count */
#define SWCRR_SWEN 0x00000004 /* Watchdog Enable bit */
#define SWCRR_SWRI 0x00000002 /* Software Watchdog Reset/Interrupt Select bit */
#define SWCRR_SWPR 0x00000001 /* Software Watchdog Counter Prescale bit */
#define SWCRR_RES ~(SWCRR_SWTC | SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
/* SWCNR - System Watchdog Counter Register
*/
#define SWCNR 0x0908 /* Register offset to immr */
#define SWCNR_SWCN 0x0000FFFF /* Software Watchdog Count mask */
#define SWCNR_RES ~(SWCNR_SWCN)
/* SWSRR - System Watchdog Service Register
*/
#define SWSRR 0x090E /* Register offset to immr */
/* ACR - Arbiter Configuration Register
*/
#define ACR_COREDIS 0x10000000 /* Core disable */
#define ACR_COREDIS_SHIFT (31-7)
#define ACR_PIPE_DEP 0x00070000 /* Pipeline depth */
#define ACR_PIPE_DEP_SHIFT (31-15)
#define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count */
#define ACR_PCI_RPTCNT_SHIFT (31-19)
#define ACR_RPTCNT 0x00000700 /* Repeat count */
#define ACR_RPTCNT_SHIFT (31-23)
#define ACR_APARK 0x00000030 /* Address parking */
#define ACR_APARK_SHIFT (31-27)
#define ACR_PARKM 0x0000000F /* Parking master */
#define ACR_PARKM_SHIFT (31-31)
/* ATR - Arbiter Timers Register
*/
#define ATR_DTO 0x00FF0000 /* Data time out */
#define ATR_ATO 0x000000FF /* Address time out */
/* AER - Arbiter Event Register
*/
#define AER_ETEA 0x00000020 /* Transfer error */
#define AER_RES 0x00000010 /* Reserved transfer type */
#define AER_ECW 0x00000008 /* External control word transfer type */
#define AER_AO 0x00000004 /* Address Only transfer type */
#define AER_DTO 0x00000002 /* Data time out */
#define AER_ATO 0x00000001 /* Address time out */
/* AEATR - Arbiter Event Address Register
*/
#define AEATR_EVENT 0x07000000 /* Event type */
#define AEATR_MSTR_ID 0x001F0000 /* Master Id */
#define AEATR_TBST 0x00000800 /* Transfer burst */
#define AEATR_TSIZE 0x00000700 /* Transfer Size */
#define AEATR_TTYPE 0x0000001F /* Transfer Type */
/* RSR - Reset Status Register
*/
#define RSR_SWSR 0x00002000 /* software soft reset */
#define RSR_SWSR_SHIFT 13
#define RSR_SWHR 0x00001000 /* software hard reset */
#define RSR_SWHR_SHIFT 12
#define RSR_JHRS 0x00000200 /* jtag hreset */
#define RSR_JHRS_SHIFT 9
#define RSR_JSRS 0x00000100 /* jtag sreset status */
#define RSR_JSRS_SHIFT 8
#define RSR_CSHR 0x00000010 /* checkstop reset status */
#define RSR_CSHR_SHIFT 4
#define RSR_SWRS 0x00000008 /* software watchdog reset status */
#define RSR_SWRS_SHIFT 3
#define RSR_BMRS 0x00000004 /* bus monitop reset status */
#define RSR_BMRS_SHIFT 2
#define RSR_SRS 0x00000002 /* soft reset status */
#define RSR_SRS_SHIFT 1
#define RSR_HRS 0x00000001 /* hard reset status */
#define RSR_HRS_SHIFT 0
#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\
RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\
RSR_BMRS | RSR_SRS | RSR_HRS)
/* RMR - Reset Mode Register
*/
#define RMR_CSRE 0x00000001 /* checkstop reset enable */
#define RMR_CSRE_SHIFT 0
#define RMR_RES ~(RMR_CSRE)
/* RCR - Reset Control Register
*/
#define RCR_SWHR 0x00000002 /* software hard reset */
#define RCR_SWSR 0x00000001 /* software soft reset */
#define RCR_RES ~(RCR_SWHR | RCR_SWSR)
/* RCER - Reset Control Enable Register
*/
#define RCER_CRE 0x00000001 /* software hard reset */
#define RCER_RES ~(RCER_CRE)
/* SPMR - System PLL Mode Register
*/
#define SPMR_SPMF 0x0F000000
#define SPMR_SPMF_SHIFT 24
#define SPMR_CPMF 0x000F0000
#define SPMR_CPMF_SHIFT 16
/* SCFR1 System Clock Frequency Register 1
*/
#define SCFR1_IPS_DIV 0x4
#define SCFR1_IPS_DIV_MASK 0x03800000
#define SCFR1_IPS_DIV_SHIFT 23
/* SCFR2 System Clock Frequency Register 2
*/
#define SCFR2_SYS_DIV 0xFC000000
#define SCFR2_SYS_DIV_SHIFT 26
/* SCCR - System Clock Control Registers
*/
/* System Clock Control Register 1 commands */
#define CLOCK_SCCR1_CFG_EN 0x80000000
#define CLOCK_SCCR1_LPC_EN 0x40000000
#define CLOCK_SCCR1_NFC_EN 0x20000000
#define CLOCK_SCCR1_PATA_EN 0x10000000
#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn))
#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000
#define CLOCK_SCCR1_SATA_EN 0x00004000
#define CLOCK_SCCR1_FEC_EN 0x00002000
#define CLOCK_SCCR1_TPR_EN 0x00001000
#define CLOCK_SCCR1_PCI_EN 0x00000800
#define CLOCK_SCCR1_DDR_EN 0x00000400
/* System Clock Control Register 2 commands */
#define CLOCK_SCCR2_DIU_EN 0x80000000
#define CLOCK_SCCR2_AXE_EN 0x40000000
#define CLOCK_SCCR2_MEM_EN 0x20000000
#define CLOCK_SCCR2_USB2_EN 0x10000000
#define CLOCK_SCCR2_USB1_EN 0x08000000
#define CLOCK_SCCR2_I2C_EN 0x04000000
#define CLOCK_SCCR2_BDLC_EN 0x02000000
#define CLOCK_SCCR2_SDHC_EN 0x01000000
#define CLOCK_SCCR2_SPDIF_EN 0x00800000
#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000
#define CLOCK_SCCR2_MBX_EN 0x00200000
#define CLOCK_SCCR2_MBX_3D_EN 0x00100000
#define CLOCK_SCCR2_IIM_EN 0x00080000
/* PSC FIFO Command values */
#define PSC_FIFO_RESET_SLICE 0x80
#define PSC_FIFO_ENABLE_SLICE 0x01
/* PSC FIFO Controller Command values */
#define FIFOC_ENABLE_CLOCK_GATE 0x01
#define FIFOC_DISABLE_CLOCK_GATE 0x00
/* PSC FIFO status */
#define PSC_FIFO_EMPTY 0x01
/* PSC Command values */
#define PSC_RX_ENABLE 0x01
#define PSC_RX_DISABLE 0x02
#define PSC_TX_ENABLE 0x04
#define PSC_TX_DISABLE 0x08
#define PSC_SEL_MODE_REG_1 0x10
#define PSC_RST_RX 0x20
#define PSC_RST_TX 0x30
#define PSC_RST_ERR_STAT 0x40
#define PSC_RST_BRK_CHG_INT 0x50
#define PSC_START_BRK 0x60
#define PSC_STOP_BRK 0x70
/* PSC status register bits */
#define PSC_SR_CDE 0x0080
#define PSC_SR_TXEMP 0x0800
#define PSC_SR_OE 0x1000
#define PSC_SR_PE 0x2000
#define PSC_SR_FE 0x4000
#define PSC_SR_RB 0x8000
/* PSC mode fields */
#define PSC_MODE_5_BITS 0x00
#define PSC_MODE_6_BITS 0x01
#define PSC_MODE_7_BITS 0x02
#define PSC_MODE_8_BITS 0x03
#define PSC_MODE_PAREVEN 0x00
#define PSC_MODE_PARODD 0x04
#define PSC_MODE_PARFORCE 0x08
#define PSC_MODE_PARNONE 0x10
#define PSC_MODE_ENTIMEOUT 0x20
#define PSC_MODE_RXRTS 0x80
#define PSC_MODE_1_STOPBIT 0x07
/*
* Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs
*
* NOTE: individual PSC units are free to use whatever area (and size) of the
* FIFOC internal memory, so make sure memory areas for FIFO slices used by
* different PSCs do not overlap!
*
* Overall size of FIFOC memory is not documented in the MPC5121e RM, but
* tests indicate that it is 1024 words total.
*/
#define FIFOC_PSC0_TX_SIZE 0x0 /* number of 4-byte words for FIFO slice */
#define FIFOC_PSC0_TX_ADDR 0x0
#define FIFOC_PSC0_RX_SIZE 0x0
#define FIFOC_PSC0_RX_ADDR 0x0
#define FIFOC_PSC1_TX_SIZE 0x0
#define FIFOC_PSC1_TX_ADDR 0x0
#define FIFOC_PSC1_RX_SIZE 0x0
#define FIFOC_PSC1_RX_ADDR 0x0
#define FIFOC_PSC2_TX_SIZE 0x0
#define FIFOC_PSC2_TX_ADDR 0x0
#define FIFOC_PSC2_RX_SIZE 0x0
#define FIFOC_PSC2_RX_ADDR 0x0
#define FIFOC_PSC3_TX_SIZE 0x04
#define FIFOC_PSC3_TX_ADDR 0x0
#define FIFOC_PSC3_RX_SIZE 0x04
#define FIFOC_PSC3_RX_ADDR 0x10
#define FIFOC_PSC4_TX_SIZE 0x0
#define FIFOC_PSC4_TX_ADDR 0x0
#define FIFOC_PSC4_RX_SIZE 0x0
#define FIFOC_PSC4_RX_ADDR 0x0
#define FIFOC_PSC5_TX_SIZE 0x0
#define FIFOC_PSC5_TX_ADDR 0x0
#define FIFOC_PSC5_RX_SIZE 0x0
#define FIFOC_PSC5_RX_ADDR 0x0
#define FIFOC_PSC6_TX_SIZE 0x0
#define FIFOC_PSC6_TX_ADDR 0x0
#define FIFOC_PSC6_RX_SIZE 0x0
#define FIFOC_PSC6_RX_ADDR 0x0
#define FIFOC_PSC7_TX_SIZE 0x0
#define FIFOC_PSC7_TX_ADDR 0x0
#define FIFOC_PSC7_RX_SIZE 0x0
#define FIFOC_PSC7_RX_ADDR 0x0
#define FIFOC_PSC8_TX_SIZE 0x0
#define FIFOC_PSC8_TX_ADDR 0x0
#define FIFOC_PSC8_RX_SIZE 0x0
#define FIFOC_PSC8_RX_ADDR 0x0
#define FIFOC_PSC9_TX_SIZE 0x0
#define FIFOC_PSC9_TX_ADDR 0x0
#define FIFOC_PSC9_RX_SIZE 0x0
#define FIFOC_PSC9_RX_ADDR 0x0
#define FIFOC_PSC10_TX_SIZE 0x0
#define FIFOC_PSC10_TX_ADDR 0x0
#define FIFOC_PSC10_RX_SIZE 0x0
#define FIFOC_PSC10_RX_ADDR 0x0
#define FIFOC_PSC11_TX_SIZE 0x0
#define FIFOC_PSC11_TX_ADDR 0x0
#define FIFOC_PSC11_RX_SIZE 0x0
#define FIFOC_PSC11_RX_ADDR 0x0
/* IO Control Register
*/
/* Indexes in regs array */
#define MEM_IDX 0x00
#define PATA_CE1_IDX 0x2e
#define PATA_CE2_IDX 0x2f
#define PATA_ISOLATE_IDX 0x30
#define PATA_IOR_IDX 0x31
#define PATA_IOW_IDX 0x32
#define PATA_IOCHRDY_IDX 0x33
#define PATA_INTRQ_IDX 0x34
#define PATA_DRQ_IDX 0x35
#define PATA_DACK_IDX 0x36
#define SPDIF_TXCLOCK_IDX 0x73
#define SPDIF_TX_IDX 0x74
#define SPDIF_RX_IDX 0x75
#define PSC0_0_IDX 0x83
#define PSC0_1_IDX 0x84
#define PSC0_2_IDX 0x85
#define PSC0_3_IDX 0x86
#define PSC0_4_IDX 0x87
#define PSC1_0_IDX 0x88
#define PSC1_1_IDX 0x89
#define PSC1_2_IDX 0x8a
#define PSC1_3_IDX 0x8b
#define PSC1_4_IDX 0x8c
#define PSC2_0_IDX 0x8d
#define PSC2_1_IDX 0x8e
#define PSC2_2_IDX 0x8f
#define PSC2_3_IDX 0x90
#define PSC2_4_IDX 0x91
#define IOCTRL_FUNCMUX_SHIFT 7
#define IOCTRL_FUNCMUX_FEC 1
#define IOCTRL_MUX_FEC (IOCTRL_FUNCMUX_FEC << IOCTRL_FUNCMUX_SHIFT)
/* Set for DDR */
#define IOCTRL_MUX_DDR 0x00000036
/* Register Offset Base */
#define MPC512X_FEC (CFG_IMMR + 0x02800)
/* Number of I2C buses */
#define I2C_BUS_CNT 3
/* I2Cn control register bits */
#define I2C_EN 0x80
#define I2C_IEN 0x40
#define I2C_STA 0x20
#define I2C_TX 0x10
#define I2C_TXAK 0x08
#define I2C_RSTA 0x04
#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
/* I2Cn status register bits */
#define I2C_CF 0x80
#define I2C_AAS 0x40
#define I2C_BB 0x20
#define I2C_AL 0x10
#define I2C_SRW 0x04
#define I2C_IF 0x02
#define I2C_RXAK 0x01
#endif /* __MPC512X_H__ */