upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
365 lines
10 KiB
365 lines
10 KiB
/*
|
|
* (C) Copyright 2007-2009 Michal Simek
|
|
* (C) Copyright 2003 Xilinx Inc.
|
|
*
|
|
* Michal SIMEK <monstr@monstr.eu>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <net.h>
|
|
#include <config.h>
|
|
#include <malloc.h>
|
|
#include <asm/io.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#define ENET_MAX_MTU PKTSIZE
|
|
#define ENET_MAX_MTU_ALIGNED PKTSIZE_ALIGN
|
|
#define ENET_ADDR_LENGTH 6
|
|
|
|
/* EmacLite constants */
|
|
#define XEL_BUFFER_OFFSET 0x0800 /* Next buffer's offset */
|
|
#define XEL_TPLR_OFFSET 0x07F4 /* Tx packet length */
|
|
#define XEL_TSR_OFFSET 0x07FC /* Tx status */
|
|
#define XEL_RSR_OFFSET 0x17FC /* Rx status */
|
|
#define XEL_RXBUFF_OFFSET 0x1000 /* Receive Buffer */
|
|
|
|
/* Xmit complete */
|
|
#define XEL_TSR_XMIT_BUSY_MASK 0x00000001UL
|
|
/* Xmit interrupt enable bit */
|
|
#define XEL_TSR_XMIT_IE_MASK 0x00000008UL
|
|
/* Buffer is active, SW bit only */
|
|
#define XEL_TSR_XMIT_ACTIVE_MASK 0x80000000UL
|
|
/* Program the MAC address */
|
|
#define XEL_TSR_PROGRAM_MASK 0x00000002UL
|
|
/* define for programming the MAC address into the EMAC Lite */
|
|
#define XEL_TSR_PROG_MAC_ADDR (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_PROGRAM_MASK)
|
|
|
|
/* Transmit packet length upper byte */
|
|
#define XEL_TPLR_LENGTH_MASK_HI 0x0000FF00UL
|
|
/* Transmit packet length lower byte */
|
|
#define XEL_TPLR_LENGTH_MASK_LO 0x000000FFUL
|
|
|
|
/* Recv complete */
|
|
#define XEL_RSR_RECV_DONE_MASK 0x00000001UL
|
|
/* Recv interrupt enable bit */
|
|
#define XEL_RSR_RECV_IE_MASK 0x00000008UL
|
|
|
|
typedef struct {
|
|
u32 baseaddress; /* Base address for device (IPIF) */
|
|
u32 nexttxbuffertouse; /* Next TX buffer to write to */
|
|
u32 nextrxbuffertouse; /* Next RX buffer to read from */
|
|
uchar deviceid; /* Unique ID of device - for future */
|
|
} xemaclite;
|
|
|
|
static xemaclite emaclite;
|
|
|
|
static u32 etherrxbuff[PKTSIZE_ALIGN/4]; /* Receive buffer */
|
|
|
|
static void xemaclite_alignedread (u32 *srcptr, void *destptr, u32 bytecount)
|
|
{
|
|
u32 i;
|
|
u32 alignbuffer;
|
|
u32 *to32ptr;
|
|
u32 *from32ptr;
|
|
u8 *to8ptr;
|
|
u8 *from8ptr;
|
|
|
|
from32ptr = (u32 *) srcptr;
|
|
|
|
/* Word aligned buffer, no correction needed. */
|
|
to32ptr = (u32 *) destptr;
|
|
while (bytecount > 3) {
|
|
*to32ptr++ = *from32ptr++;
|
|
bytecount -= 4;
|
|
}
|
|
to8ptr = (u8 *) to32ptr;
|
|
|
|
alignbuffer = *from32ptr++;
|
|
from8ptr = (u8 *) & alignbuffer;
|
|
|
|
for (i = 0; i < bytecount; i++) {
|
|
*to8ptr++ = *from8ptr++;
|
|
}
|
|
}
|
|
|
|
static void xemaclite_alignedwrite (void *srcptr, u32 destptr, u32 bytecount)
|
|
{
|
|
u32 i;
|
|
u32 alignbuffer;
|
|
u32 *to32ptr = (u32 *) destptr;
|
|
u32 *from32ptr;
|
|
u8 *to8ptr;
|
|
u8 *from8ptr;
|
|
|
|
from32ptr = (u32 *) srcptr;
|
|
while (bytecount > 3) {
|
|
|
|
*to32ptr++ = *from32ptr++;
|
|
bytecount -= 4;
|
|
}
|
|
|
|
alignbuffer = 0;
|
|
to8ptr = (u8 *) & alignbuffer;
|
|
from8ptr = (u8 *) from32ptr;
|
|
|
|
for (i = 0; i < bytecount; i++) {
|
|
*to8ptr++ = *from8ptr++;
|
|
}
|
|
|
|
*to32ptr++ = alignbuffer;
|
|
}
|
|
|
|
static void emaclite_halt(struct eth_device *dev)
|
|
{
|
|
debug ("eth_halt\n");
|
|
}
|
|
|
|
static int emaclite_init(struct eth_device *dev, bd_t *bis)
|
|
{
|
|
debug ("EmacLite Initialization Started\n");
|
|
memset (&emaclite, 0, sizeof (xemaclite));
|
|
emaclite.baseaddress = dev->iobase;
|
|
|
|
/*
|
|
* TX - TX_PING & TX_PONG initialization
|
|
*/
|
|
/* Restart PING TX */
|
|
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
|
|
/* Copy MAC address */
|
|
xemaclite_alignedwrite (dev->enetaddr,
|
|
emaclite.baseaddress, ENET_ADDR_LENGTH);
|
|
/* Set the length */
|
|
out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
|
|
/* Update the MAC address in the EMAC Lite */
|
|
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, XEL_TSR_PROG_MAC_ADDR);
|
|
/* Wait for EMAC Lite to finish with the MAC address update */
|
|
while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET) &
|
|
XEL_TSR_PROG_MAC_ADDR) != 0) ;
|
|
|
|
#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
|
|
/* The same operation with PONG TX */
|
|
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET, 0);
|
|
xemaclite_alignedwrite (dev->enetaddr, emaclite.baseaddress +
|
|
XEL_BUFFER_OFFSET, ENET_ADDR_LENGTH);
|
|
out_be32 (emaclite.baseaddress + XEL_TPLR_OFFSET, ENET_ADDR_LENGTH);
|
|
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET + XEL_BUFFER_OFFSET,
|
|
XEL_TSR_PROG_MAC_ADDR);
|
|
while ((in_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
|
|
XEL_BUFFER_OFFSET) & XEL_TSR_PROG_MAC_ADDR) != 0) ;
|
|
#endif
|
|
|
|
/*
|
|
* RX - RX_PING & RX_PONG initialization
|
|
*/
|
|
/* Write out the value to flush the RX buffer */
|
|
out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET, XEL_RSR_RECV_IE_MASK);
|
|
#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
|
|
out_be32 (emaclite.baseaddress + XEL_RSR_OFFSET + XEL_BUFFER_OFFSET,
|
|
XEL_RSR_RECV_IE_MASK);
|
|
#endif
|
|
|
|
debug ("EmacLite Initialization complete\n");
|
|
return 0;
|
|
}
|
|
|
|
static int xemaclite_txbufferavailable (xemaclite *instanceptr)
|
|
{
|
|
u32 reg;
|
|
u32 txpingbusy;
|
|
u32 txpongbusy;
|
|
/*
|
|
* Read the other buffer register
|
|
* and determine if the other buffer is available
|
|
*/
|
|
reg = in_be32 (instanceptr->baseaddress +
|
|
instanceptr->nexttxbuffertouse + 0);
|
|
txpingbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
|
|
XEL_TSR_XMIT_BUSY_MASK);
|
|
|
|
reg = in_be32 (instanceptr->baseaddress +
|
|
(instanceptr->nexttxbuffertouse ^ XEL_TSR_OFFSET) + 0);
|
|
txpongbusy = ((reg & XEL_TSR_XMIT_BUSY_MASK) ==
|
|
XEL_TSR_XMIT_BUSY_MASK);
|
|
|
|
return (!(txpingbusy && txpongbusy));
|
|
}
|
|
|
|
static int emaclite_send (struct eth_device *dev, volatile void *ptr, int len)
|
|
{
|
|
u32 reg;
|
|
u32 baseaddress;
|
|
|
|
u32 maxtry = 1000;
|
|
|
|
if (len > ENET_MAX_MTU)
|
|
len = ENET_MAX_MTU;
|
|
|
|
while (!xemaclite_txbufferavailable (&emaclite) && maxtry) {
|
|
udelay (10);
|
|
maxtry--;
|
|
}
|
|
|
|
if (!maxtry) {
|
|
printf ("Error: Timeout waiting for ethernet TX buffer\n");
|
|
/* Restart PING TX */
|
|
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET, 0);
|
|
#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
|
|
out_be32 (emaclite.baseaddress + XEL_TSR_OFFSET +
|
|
XEL_BUFFER_OFFSET, 0);
|
|
#endif
|
|
return -1;
|
|
}
|
|
|
|
/* Determine the expected TX buffer address */
|
|
baseaddress = (emaclite.baseaddress + emaclite.nexttxbuffertouse);
|
|
|
|
/* Determine if the expected buffer address is empty */
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
|
|
&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
|
|
& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
|
|
|
|
#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
|
|
emaclite.nexttxbuffertouse ^= XEL_BUFFER_OFFSET;
|
|
#endif
|
|
debug ("Send packet from 0x%x\n", baseaddress);
|
|
/* Write the frame to the buffer */
|
|
xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
|
|
out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
|
|
(XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
reg |= XEL_TSR_XMIT_BUSY_MASK;
|
|
if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
|
|
reg |= XEL_TSR_XMIT_ACTIVE_MASK;
|
|
}
|
|
out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
|
|
return 0;
|
|
}
|
|
#ifdef CONFIG_XILINX_EMACLITE_TX_PING_PONG
|
|
/* Switch to second buffer */
|
|
baseaddress ^= XEL_BUFFER_OFFSET;
|
|
/* Determine if the expected buffer address is empty */
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
if (((reg & XEL_TSR_XMIT_BUSY_MASK) == 0)
|
|
&& ((in_be32 ((baseaddress) + XEL_TSR_OFFSET)
|
|
& XEL_TSR_XMIT_ACTIVE_MASK) == 0)) {
|
|
debug ("Send packet from 0x%x\n", baseaddress);
|
|
/* Write the frame to the buffer */
|
|
xemaclite_alignedwrite ((void *) ptr, baseaddress, len);
|
|
out_be32 (baseaddress + XEL_TPLR_OFFSET,(len &
|
|
(XEL_TPLR_LENGTH_MASK_HI | XEL_TPLR_LENGTH_MASK_LO)));
|
|
reg = in_be32 (baseaddress + XEL_TSR_OFFSET);
|
|
reg |= XEL_TSR_XMIT_BUSY_MASK;
|
|
if ((reg & XEL_TSR_XMIT_IE_MASK) != 0) {
|
|
reg |= XEL_TSR_XMIT_ACTIVE_MASK;
|
|
}
|
|
out_be32 (baseaddress + XEL_TSR_OFFSET, reg);
|
|
return 0;
|
|
}
|
|
#endif
|
|
puts ("Error while sending frame\n");
|
|
return -1;
|
|
}
|
|
|
|
static int emaclite_recv(struct eth_device *dev)
|
|
{
|
|
u32 length;
|
|
u32 reg;
|
|
u32 baseaddress;
|
|
|
|
baseaddress = emaclite.baseaddress + emaclite.nextrxbuffertouse;
|
|
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
|
|
debug ("Testing data at address 0x%x\n", baseaddress);
|
|
if ((reg & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
|
|
#ifdef CONFIG_XILINX_EMACLITE_RX_PING_PONG
|
|
emaclite.nextrxbuffertouse ^= XEL_BUFFER_OFFSET;
|
|
#endif
|
|
} else {
|
|
#ifndef CONFIG_XILINX_EMACLITE_RX_PING_PONG
|
|
debug ("No data was available - address 0x%x\n", baseaddress);
|
|
return 0;
|
|
#else
|
|
baseaddress ^= XEL_BUFFER_OFFSET;
|
|
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
|
|
if ((reg & XEL_RSR_RECV_DONE_MASK) !=
|
|
XEL_RSR_RECV_DONE_MASK) {
|
|
debug ("No data was available - address 0x%x\n",
|
|
baseaddress);
|
|
return 0;
|
|
}
|
|
#endif
|
|
}
|
|
/* Get the length of the frame that arrived */
|
|
switch(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0xC))) &
|
|
0xFFFF0000 ) >> 16) {
|
|
case 0x806:
|
|
length = 42 + 20; /* FIXME size of ARP */
|
|
debug ("ARP Packet\n");
|
|
break;
|
|
case 0x800:
|
|
length = 14 + 14 +
|
|
(((ntohl(in_be32 (baseaddress + XEL_RXBUFF_OFFSET + 0x10))) &
|
|
0xFFFF0000) >> 16); /* FIXME size of IP packet */
|
|
debug ("IP Packet\n");
|
|
break;
|
|
default:
|
|
debug ("Other Packet\n");
|
|
length = ENET_MAX_MTU;
|
|
break;
|
|
}
|
|
|
|
xemaclite_alignedread ((u32 *) (baseaddress + XEL_RXBUFF_OFFSET),
|
|
etherrxbuff, length);
|
|
|
|
/* Acknowledge the frame */
|
|
reg = in_be32 (baseaddress + XEL_RSR_OFFSET);
|
|
reg &= ~XEL_RSR_RECV_DONE_MASK;
|
|
out_be32 (baseaddress + XEL_RSR_OFFSET, reg);
|
|
|
|
debug ("Packet receive from 0x%x, length %dB\n", baseaddress, length);
|
|
NetReceive ((uchar *) etherrxbuff, length);
|
|
return length;
|
|
|
|
}
|
|
|
|
int xilinx_emaclite_initialize (bd_t *bis, int base_addr)
|
|
{
|
|
struct eth_device *dev;
|
|
|
|
dev = malloc(sizeof(*dev));
|
|
if (dev == NULL)
|
|
return -1;
|
|
|
|
memset(dev, 0, sizeof(*dev));
|
|
sprintf(dev->name, "Xilinx_Emaclite");
|
|
|
|
dev->iobase = base_addr;
|
|
dev->priv = 0;
|
|
dev->init = emaclite_init;
|
|
dev->halt = emaclite_halt;
|
|
dev->send = emaclite_send;
|
|
dev->recv = emaclite_recv;
|
|
|
|
eth_register(dev);
|
|
|
|
return 1;
|
|
}
|
|
|