upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Lokesh Vutla 38f25b125e OMAP4+: Force DDR in self-refresh after warm reset ... Errata ID:i727 Description: The refresh rate is programmed in the EMIF_SDRAM_REF_CTRL[15:0] REG_REFRESH_RATE parameter taking into account frequency of the device. When a warm reset is applied on the system, the OMAP processor restarts with another OPP and so frequency is not the same. Due to this frequency change, the refresh rate will be too low and could result in an unexpected behavior on the memory side. Workaround: The workaround is to force self-refresh when coming back from the warm reset with the following sequence: • Set EMIF_PWR_MGMT_CTRL[10:8] REG_LP_MODE to 0x2 • Set EMIF_PWR_MGMT_CTRL[7:4] REG_SR_TIM to 0x0 • Do a dummy read (loads automatically new value of sr_tim) This will reduce the risk of memory content corruption, but memory content can't be guaranteed after a warm reset. This errata is impacted on OMAP4430: 1.0, 2.0, 2.1, 2.2, 2.3 OMAP4460: 1.0, 1.1 OMAP4470: 1.0 OMAP5430: 1.0 Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: R Sricharan <r.sricharan@ti.com> Signed-off-by: Senthilvadivu Guruswamy <svadivu@ti.com>		13 years ago
..
clocks.h	OMAP5: DPLL core lock for OMAP5432	13 years ago
cpu.h	ARM: OMAP3+: Detect reset type	13 years ago
ehci.h	ehci-omap: Clean up added ehci-omap.c	13 years ago
gpio.h	omap: fix gpio related build breaks	13 years ago
i2c.h	…
mmc_host_def.h	ARM:OMAP+:MMC: Add parameters to MMC init	13 years ago
mux_omap4.h	omap4+: Avoid using __attribute__ ((__packed__))	13 years ago
omap.h	ARM: OMAP4: Correct the lpddr2 io settings register value.	13 years ago
sys_proto.h	OMAP4+: Force DDR in self-refresh after warm reset	13 years ago