upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
246 lines
6.1 KiB
246 lines
6.1 KiB
/*
|
|
* Freescale i.MX28 I2C Driver
|
|
*
|
|
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
|
|
* on behalf of DENX Software Engineering GmbH
|
|
*
|
|
* Partly based on Linux kernel i2c-mxs.c driver:
|
|
* Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
|
|
*
|
|
* Which was based on a (non-working) driver which was:
|
|
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
|
|
#define MXS_I2C_MAX_TIMEOUT 1000000
|
|
|
|
void mxs_i2c_reset(void)
|
|
{
|
|
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
|
|
int ret;
|
|
|
|
ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg);
|
|
if (ret) {
|
|
debug("MXS I2C: Block reset timeout\n");
|
|
return;
|
|
}
|
|
|
|
writel(I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | I2C_CTRL1_NO_SLAVE_ACK_IRQ |
|
|
I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
|
|
I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ,
|
|
&i2c_regs->hw_i2c_ctrl1_clr);
|
|
|
|
writel(I2C_QUEUECTRL_PIO_QUEUE_MODE, &i2c_regs->hw_i2c_queuectrl_set);
|
|
}
|
|
|
|
void mxs_i2c_setup_read(uint8_t chip, int len)
|
|
{
|
|
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
|
|
|
|
writel(I2C_QUEUECMD_RETAIN_CLOCK | I2C_QUEUECMD_PRE_SEND_START |
|
|
I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
|
|
(1 << I2C_QUEUECMD_XFER_COUNT_OFFSET),
|
|
&i2c_regs->hw_i2c_queuecmd);
|
|
|
|
writel((chip << 1) | 1, &i2c_regs->hw_i2c_data);
|
|
|
|
writel(I2C_QUEUECMD_SEND_NAK_ON_LAST | I2C_QUEUECMD_MASTER_MODE |
|
|
(len << I2C_QUEUECMD_XFER_COUNT_OFFSET) |
|
|
I2C_QUEUECMD_POST_SEND_STOP, &i2c_regs->hw_i2c_queuecmd);
|
|
|
|
writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
|
|
}
|
|
|
|
void mxs_i2c_write(uchar chip, uint addr, int alen,
|
|
uchar *buf, int blen, int stop)
|
|
{
|
|
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
|
|
uint32_t data;
|
|
int i, remain, off;
|
|
|
|
if ((alen > 4) || (alen == 0)) {
|
|
debug("MXS I2C: Invalid address length\n");
|
|
return;
|
|
}
|
|
|
|
if (stop)
|
|
stop = I2C_QUEUECMD_POST_SEND_STOP;
|
|
|
|
writel(I2C_QUEUECMD_PRE_SEND_START |
|
|
I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
|
|
((blen + alen + 1) << I2C_QUEUECMD_XFER_COUNT_OFFSET) | stop,
|
|
&i2c_regs->hw_i2c_queuecmd);
|
|
|
|
data = (chip << 1) << 24;
|
|
|
|
for (i = 0; i < alen; i++) {
|
|
data >>= 8;
|
|
data |= ((char *)&addr)[alen - i - 1] << 24;
|
|
if ((i & 3) == 2)
|
|
writel(data, &i2c_regs->hw_i2c_data);
|
|
}
|
|
|
|
off = i;
|
|
for (; i < off + blen; i++) {
|
|
data >>= 8;
|
|
data |= buf[i - off] << 24;
|
|
if ((i & 3) == 2)
|
|
writel(data, &i2c_regs->hw_i2c_data);
|
|
}
|
|
|
|
remain = 24 - ((i & 3) * 8);
|
|
if (remain)
|
|
writel(data >> remain, &i2c_regs->hw_i2c_data);
|
|
|
|
writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
|
|
}
|
|
|
|
int mxs_i2c_wait_for_ack(void)
|
|
{
|
|
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
|
|
uint32_t tmp;
|
|
int timeout = MXS_I2C_MAX_TIMEOUT;
|
|
|
|
for (;;) {
|
|
tmp = readl(&i2c_regs->hw_i2c_ctrl1);
|
|
if (tmp & I2C_CTRL1_NO_SLAVE_ACK_IRQ) {
|
|
debug("MXS I2C: No slave ACK\n");
|
|
goto err;
|
|
}
|
|
|
|
if (tmp & (
|
|
I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
|
|
I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) {
|
|
debug("MXS I2C: Error (CTRL1 = %08x)\n", tmp);
|
|
goto err;
|
|
}
|
|
|
|
if (tmp & I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ)
|
|
break;
|
|
|
|
if (!timeout--) {
|
|
debug("MXS I2C: Operation timed out\n");
|
|
goto err;
|
|
}
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
mxs_i2c_reset();
|
|
return 1;
|
|
}
|
|
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
|
|
uint32_t tmp = 0;
|
|
int ret;
|
|
int i;
|
|
|
|
mxs_i2c_write(chip, addr, alen, NULL, 0, 0);
|
|
ret = mxs_i2c_wait_for_ack();
|
|
if (ret) {
|
|
debug("MXS I2C: Failed writing address\n");
|
|
return ret;
|
|
}
|
|
|
|
mxs_i2c_setup_read(chip, len);
|
|
ret = mxs_i2c_wait_for_ack();
|
|
if (ret) {
|
|
debug("MXS I2C: Failed reading address\n");
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < len; i++) {
|
|
if (!(i & 3)) {
|
|
while (readl(&i2c_regs->hw_i2c_queuestat) &
|
|
I2C_QUEUESTAT_RD_QUEUE_EMPTY)
|
|
;
|
|
tmp = readl(&i2c_regs->hw_i2c_queuedata);
|
|
}
|
|
buffer[i] = tmp & 0xff;
|
|
tmp >>= 8;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
|
|
{
|
|
int ret;
|
|
mxs_i2c_write(chip, addr, alen, buffer, len, 1);
|
|
ret = mxs_i2c_wait_for_ack();
|
|
if (ret)
|
|
debug("MXS I2C: Failed writing address\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
int i2c_probe(uchar chip)
|
|
{
|
|
int ret;
|
|
mxs_i2c_write(chip, 0, 1, NULL, 0, 1);
|
|
ret = mxs_i2c_wait_for_ack();
|
|
mxs_i2c_reset();
|
|
return ret;
|
|
}
|
|
|
|
void i2c_init(int speed, int slaveadd)
|
|
{
|
|
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
|
|
|
|
mxs_i2c_reset();
|
|
|
|
switch (speed) {
|
|
case 100000:
|
|
writel((0x0078 << I2C_TIMING0_HIGH_COUNT_OFFSET) |
|
|
(0x0030 << I2C_TIMING0_RCV_COUNT_OFFSET),
|
|
&i2c_regs->hw_i2c_timing0);
|
|
writel((0x0080 << I2C_TIMING1_LOW_COUNT_OFFSET) |
|
|
(0x0030 << I2C_TIMING1_XMIT_COUNT_OFFSET),
|
|
&i2c_regs->hw_i2c_timing1);
|
|
break;
|
|
case 400000:
|
|
writel((0x000f << I2C_TIMING0_HIGH_COUNT_OFFSET) |
|
|
(0x0007 << I2C_TIMING0_RCV_COUNT_OFFSET),
|
|
&i2c_regs->hw_i2c_timing0);
|
|
writel((0x001f << I2C_TIMING1_LOW_COUNT_OFFSET) |
|
|
(0x000f << I2C_TIMING1_XMIT_COUNT_OFFSET),
|
|
&i2c_regs->hw_i2c_timing1);
|
|
break;
|
|
default:
|
|
printf("MXS I2C: Invalid speed selected (%d Hz)\n", speed);
|
|
return;
|
|
}
|
|
|
|
writel((0x0015 << I2C_TIMING2_BUS_FREE_OFFSET) |
|
|
(0x000d << I2C_TIMING2_LEADIN_COUNT_OFFSET),
|
|
&i2c_regs->hw_i2c_timing2);
|
|
|
|
return;
|
|
}
|
|
|