upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Mike Frysinger d9596ffbdc sf: stmicro: dont send 4 bytes when reading status register ... I can't find anywhere in the datasheet that says the status register needs 3 dummy bytes sent to it before being able to read back the first real result. Tests on a Blackfin board show that after writing the opcode, the status register starts coming back immediately. So only write out the read status register opcode before polling the result. Signed-off-by: Mike Frysinger <vapier@gentoo.org> CC: Jason McMullan <mcmullan@netapp.com> CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>		16 years ago
..
Makefile	sf: add driver for SST flashes	16 years ago
atmel.c	sf: drop DEBUG defines	16 years ago
spansion.c	sf: always read 5 bytes for the idcode	16 years ago
spi_flash.c	sf: always read 5 bytes for the idcode	16 years ago
spi_flash_internal.h	sf: set common timeouts in seconds, not milliseconds	16 years ago
sst.c	sf: add driver for SST flashes	16 years ago
stmicro.c	sf: stmicro: dont send 4 bytes when reading status register	16 years ago