upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
523 lines
11 KiB
523 lines
11 KiB
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2010
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <nand.h>
|
|
#include <netdev.h>
|
|
#include <miiphy.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/kirkwood.h>
|
|
#include <asm/arch/mpp.h>
|
|
|
|
#include "../common/common.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* BOCO FPGA definitions
|
|
*/
|
|
#define BOCO 0x10
|
|
#define REG_CTRL_H 0x02
|
|
#define MASK_WRL_UNITRUN 0x01
|
|
#define MASK_RBX_PGY_PRESENT 0x40
|
|
#define REG_IRQ_CIRQ2 0x2d
|
|
#define MASK_RBI_DEFECT_16 0x01
|
|
|
|
/* Multi-Purpose Pins Functionality configuration */
|
|
u32 kwmpp_config[] = {
|
|
MPP0_NF_IO2,
|
|
MPP1_NF_IO3,
|
|
MPP2_NF_IO4,
|
|
MPP3_NF_IO5,
|
|
MPP4_NF_IO6,
|
|
MPP5_NF_IO7,
|
|
MPP6_SYSRST_OUTn,
|
|
MPP7_PEX_RST_OUTn,
|
|
#if defined(CONFIG_SOFT_I2C)
|
|
MPP8_GPIO, /* SDA */
|
|
MPP9_GPIO, /* SCL */
|
|
#endif
|
|
#if defined(CONFIG_HARD_I2C)
|
|
MPP8_TW_SDA,
|
|
MPP9_TW_SCK,
|
|
#endif
|
|
MPP10_UART0_TXD,
|
|
MPP11_UART0_RXD,
|
|
MPP12_GPO, /* Reserved */
|
|
MPP13_UART1_TXD,
|
|
MPP14_UART1_RXD,
|
|
MPP15_GPIO, /* Not used */
|
|
MPP16_GPIO, /* Not used */
|
|
MPP17_GPIO, /* Reserved */
|
|
MPP18_NF_IO0,
|
|
MPP19_NF_IO1,
|
|
MPP20_GPIO,
|
|
MPP21_GPIO,
|
|
MPP22_GPIO,
|
|
MPP23_GPIO,
|
|
MPP24_GPIO,
|
|
MPP25_GPIO,
|
|
MPP26_GPIO,
|
|
MPP27_GPIO,
|
|
MPP28_GPIO,
|
|
MPP29_GPIO,
|
|
MPP30_GPIO,
|
|
MPP31_GPIO,
|
|
MPP32_GPIO,
|
|
MPP33_GPIO,
|
|
MPP34_GPIO, /* CDL1 (input) */
|
|
MPP35_GPIO, /* CDL2 (input) */
|
|
MPP36_GPIO, /* MAIN_IRQ (input) */
|
|
MPP37_GPIO, /* BOARD_LED */
|
|
MPP38_GPIO, /* Piggy3 LED[1] */
|
|
MPP39_GPIO, /* Piggy3 LED[2] */
|
|
MPP40_GPIO, /* Piggy3 LED[3] */
|
|
MPP41_GPIO, /* Piggy3 LED[4] */
|
|
MPP42_GPIO, /* Piggy3 LED[5] */
|
|
MPP43_GPIO, /* Piggy3 LED[6] */
|
|
MPP44_GPIO, /* Piggy3 LED[7], BIST_EN_L */
|
|
MPP45_GPIO, /* Piggy3 LED[8] */
|
|
MPP46_GPIO, /* Reserved */
|
|
MPP47_GPIO, /* Reserved */
|
|
MPP48_GPIO, /* Reserved */
|
|
MPP49_GPIO, /* SW_INTOUTn */
|
|
0
|
|
};
|
|
|
|
#if defined(CONFIG_MGCOGE3UN)
|
|
/*
|
|
* Wait for startup OK from mgcoge3ne
|
|
*/
|
|
int startup_allowed(void)
|
|
{
|
|
unsigned char buf;
|
|
|
|
/*
|
|
* Read CIRQ16 bit (bit 0)
|
|
*/
|
|
if (i2c_read(BOCO, REG_IRQ_CIRQ2, 1, &buf, 1) != 0)
|
|
printf("%s: Error reading Boco\n", __func__);
|
|
else
|
|
if ((buf & MASK_RBI_DEFECT_16) == MASK_RBI_DEFECT_16)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2))
|
|
/*
|
|
* These two boards have always ethernet present. Its connected to the mv
|
|
* switch.
|
|
*/
|
|
int ethernet_present(void)
|
|
{
|
|
return 1;
|
|
}
|
|
#else
|
|
int ethernet_present(void)
|
|
{
|
|
uchar buf;
|
|
int ret = 0;
|
|
|
|
if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
|
|
printf("%s: Error reading Boco\n", __func__);
|
|
return -1;
|
|
}
|
|
if ((buf & MASK_RBX_PGY_PRESENT) == MASK_RBX_PGY_PRESENT)
|
|
ret = 1;
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
int initialize_unit_leds(void)
|
|
{
|
|
/*
|
|
* Init the unit LEDs per default they all are
|
|
* ok apart from bootstat
|
|
*/
|
|
uchar buf;
|
|
|
|
if (i2c_read(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
|
|
printf("%s: Error reading Boco\n", __func__);
|
|
return -1;
|
|
}
|
|
buf |= MASK_WRL_UNITRUN;
|
|
if (i2c_write(BOCO, REG_CTRL_H, 1, &buf, 1) != 0) {
|
|
printf("%s: Error writing Boco\n", __func__);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_BOOTCOUNT_LIMIT)
|
|
void set_bootcount_addr(void)
|
|
{
|
|
uchar buf[32];
|
|
unsigned int bootcountaddr;
|
|
bootcountaddr = gd->ram_size - BOOTCOUNT_ADDR;
|
|
sprintf((char *)buf, "0x%x", bootcountaddr);
|
|
setenv("bootcountaddr", (char *)buf);
|
|
}
|
|
#endif
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
char *str;
|
|
int mach_type;
|
|
|
|
str = getenv("mach_type");
|
|
if (str != NULL) {
|
|
mach_type = simple_strtoul(str, NULL, 10);
|
|
printf("Overwriting MACH_TYPE with %d!!!\n", mach_type);
|
|
gd->bd->bi_arch_number = mach_type;
|
|
}
|
|
#if defined(CONFIG_MGCOGE3UN)
|
|
char *wait_for_ne;
|
|
wait_for_ne = getenv("waitforne");
|
|
if (wait_for_ne != NULL) {
|
|
if (strcmp(wait_for_ne, "true") == 0) {
|
|
int cnt = 0;
|
|
int abort = 0;
|
|
puts("NE go: ");
|
|
while (startup_allowed() == 0) {
|
|
if (tstc()) {
|
|
(void) getc(); /* consume input */
|
|
abort = 1;
|
|
break;
|
|
}
|
|
udelay(200000);
|
|
cnt++;
|
|
if (cnt == 5)
|
|
puts("wait\b\b\b\b");
|
|
if (cnt == 10) {
|
|
cnt = 0;
|
|
puts(" \b\b\b\b");
|
|
}
|
|
}
|
|
if (abort == 1)
|
|
printf("\nAbort waiting for ne\n");
|
|
else
|
|
puts("OK\n");
|
|
}
|
|
}
|
|
#endif
|
|
|
|
initialize_unit_leds();
|
|
set_km_env();
|
|
#if defined(CONFIG_BOOTCOUNT_LIMIT)
|
|
set_bootcount_addr();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
u32 tmp;
|
|
|
|
kirkwood_mpp_conf(kwmpp_config);
|
|
|
|
/*
|
|
* The FLASH_GPIO_PIN switches between using a
|
|
* NAND or a SPI FLASH. Set this pin on start
|
|
* to NAND mode.
|
|
*/
|
|
tmp = readl(KW_GPIO0_BASE);
|
|
writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
|
|
tmp = readl(KW_GPIO0_BASE + 4);
|
|
writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE + 4);
|
|
|
|
#if defined(CONFIG_SOFT_I2C)
|
|
/* init the GPIO for I2C Bitbang driver */
|
|
kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1);
|
|
kw_gpio_set_valid(KM_KIRKWOOD_SCL_PIN, 1);
|
|
kw_gpio_direction_output(KM_KIRKWOOD_SDA_PIN, 0);
|
|
kw_gpio_direction_output(KM_KIRKWOOD_SCL_PIN, 0);
|
|
#endif
|
|
#if defined(CONFIG_SYS_EEPROM_WREN)
|
|
kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38);
|
|
kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1);
|
|
#endif
|
|
#if defined(CONFIG_KM_RECONFIG_XLX)
|
|
/* trigger the reconfiguration of the xilinx fpga */
|
|
kw_gpio_set_valid(KM_XLX_PROGRAM_B_PIN, 1);
|
|
kw_gpio_direction_output(KM_XLX_PROGRAM_B_PIN, 0);
|
|
kw_gpio_direction_input(KM_XLX_PROGRAM_B_PIN);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_CMD_SF)
|
|
int do_spi_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
u32 tmp;
|
|
if (argc < 2)
|
|
return cmd_usage(cmdtp);
|
|
|
|
if ((strcmp(argv[1], "off") == 0)) {
|
|
printf("SPI FLASH disabled, NAND enabled\n");
|
|
/* Multi-Purpose Pins Functionality configuration */
|
|
kwmpp_config[0] = MPP0_NF_IO2;
|
|
kwmpp_config[1] = MPP1_NF_IO3;
|
|
kwmpp_config[2] = MPP2_NF_IO4;
|
|
kwmpp_config[3] = MPP3_NF_IO5;
|
|
|
|
kirkwood_mpp_conf(kwmpp_config);
|
|
tmp = readl(KW_GPIO0_BASE);
|
|
writel(tmp | FLASH_GPIO_PIN , KW_GPIO0_BASE);
|
|
} else if ((strcmp(argv[1], "on") == 0)) {
|
|
printf("SPI FLASH enabled, NAND disabled\n");
|
|
/* Multi-Purpose Pins Functionality configuration */
|
|
kwmpp_config[0] = MPP0_SPI_SCn;
|
|
kwmpp_config[1] = MPP1_SPI_MOSI;
|
|
kwmpp_config[2] = MPP2_SPI_SCK;
|
|
kwmpp_config[3] = MPP3_SPI_MISO;
|
|
|
|
kirkwood_mpp_conf(kwmpp_config);
|
|
tmp = readl(KW_GPIO0_BASE);
|
|
writel(tmp & (~FLASH_GPIO_PIN) , KW_GPIO0_BASE);
|
|
} else {
|
|
return cmd_usage(cmdtp);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
spitoggle, 2, 0, do_spi_toggle,
|
|
"En-/disable SPI FLASH access",
|
|
"<on|off> - Enable (on) or disable (off) SPI FLASH access\n"
|
|
);
|
|
#endif
|
|
|
|
int dram_init(void)
|
|
{
|
|
/* dram_init must store complete ramsize in gd->ram_size */
|
|
/* Fix this */
|
|
gd->ram_size = get_ram_size((void *)kw_sdram_bar(0),
|
|
kw_sdram_bs(0));
|
|
return 0;
|
|
}
|
|
|
|
void dram_init_banksize(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
|
|
gd->bd->bi_dram[i].start = kw_sdram_bar(i);
|
|
gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i),
|
|
kw_sdram_bs(i));
|
|
}
|
|
}
|
|
|
|
#if (defined(CONFIG_MGCOGE3UN)|defined(CONFIG_PORTL2))
|
|
|
|
#define PHY_LED_SEL 0x18
|
|
#define PHY_LED0_LINK (0x5)
|
|
#define PHY_LED1_ACT (0x8<<4)
|
|
#define PHY_LED2_INT (0xe<<8)
|
|
#define PHY_SPEC_CTRL 0x1c
|
|
#define PHY_RGMII_CLK_STABLE (0x1<<10)
|
|
#define PHY_CLSA (0x1<<1)
|
|
|
|
/* Configure and enable MV88E3018 PHY */
|
|
void reset_phy(void)
|
|
{
|
|
char *name = "egiga0";
|
|
unsigned short reg;
|
|
|
|
if (miiphy_set_current_dev(name))
|
|
return;
|
|
|
|
/* RGMII clk transition on data stable */
|
|
if (miiphy_read(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL, ®) != 0)
|
|
printf("Error reading PHY spec ctrl reg\n");
|
|
if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_SPEC_CTRL,
|
|
reg | PHY_RGMII_CLK_STABLE | PHY_CLSA) != 0)
|
|
printf("Error writing PHY spec ctrl reg\n");
|
|
|
|
/* leds setup */
|
|
if (miiphy_write(name, CONFIG_PHY_BASE_ADR, PHY_LED_SEL,
|
|
PHY_LED0_LINK | PHY_LED1_ACT | PHY_LED2_INT) != 0)
|
|
printf("Error writing PHY LED reg\n");
|
|
|
|
/* reset the phy */
|
|
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
|
|
}
|
|
#else
|
|
/* Configure and enable MV88E1118 PHY on the piggy*/
|
|
void reset_phy(void)
|
|
{
|
|
char *name = "egiga0";
|
|
|
|
if (miiphy_set_current_dev(name))
|
|
return;
|
|
|
|
/* reset the phy */
|
|
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
|
|
}
|
|
#endif
|
|
|
|
|
|
#if defined(CONFIG_HUSH_INIT_VAR)
|
|
int hush_init_var(void)
|
|
{
|
|
ivm_read_eeprom();
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_BOOTCOUNT_LIMIT)
|
|
const ulong patterns[] = { 0x00000000,
|
|
0xFFFFFFFF,
|
|
0xFF00FF00,
|
|
0x0F0F0F0F,
|
|
0xF0F0F0F0};
|
|
const ulong NBR_OF_PATTERNS = sizeof(patterns)/sizeof(*patterns);
|
|
const ulong OFFS_PATTERN = 3;
|
|
const ulong REPEAT_PATTERN = 1000;
|
|
|
|
void bootcount_store(ulong a)
|
|
{
|
|
volatile ulong *save_addr;
|
|
volatile ulong size = 0;
|
|
int i;
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
|
|
size += gd->bd->bi_dram[i].size;
|
|
}
|
|
save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
|
|
writel(a, save_addr);
|
|
writel(BOOTCOUNT_MAGIC, &save_addr[1]);
|
|
|
|
for (i = 0; i < REPEAT_PATTERN; i++)
|
|
writel(patterns[i % NBR_OF_PATTERNS],
|
|
&save_addr[i+OFFS_PATTERN]);
|
|
|
|
}
|
|
|
|
ulong bootcount_load(void)
|
|
{
|
|
volatile ulong *save_addr;
|
|
volatile ulong size = 0;
|
|
ulong counter = 0;
|
|
int i, tmp;
|
|
|
|
for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) {
|
|
size += gd->bd->bi_dram[i].size;
|
|
}
|
|
save_addr = (ulong*)(size - BOOTCOUNT_ADDR);
|
|
|
|
counter = readl(&save_addr[0]);
|
|
|
|
/* Is the counter reliable, check in the big pattern for bit errors */
|
|
for (i = 0; (i < REPEAT_PATTERN) && (counter != 0); i++) {
|
|
tmp = readl(&save_addr[i+OFFS_PATTERN]);
|
|
if (tmp != patterns[i % NBR_OF_PATTERNS])
|
|
counter = 0;
|
|
}
|
|
return counter;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SOFT_I2C)
|
|
void set_sda(int state)
|
|
{
|
|
I2C_ACTIVE;
|
|
I2C_SDA(state);
|
|
}
|
|
|
|
void set_scl(int state)
|
|
{
|
|
I2C_SCL(state);
|
|
}
|
|
|
|
int get_sda(void)
|
|
{
|
|
I2C_TRISTATE;
|
|
return I2C_READ;
|
|
}
|
|
|
|
int get_scl(void)
|
|
{
|
|
return kw_gpio_get_value(KM_KIRKWOOD_SCL_PIN) ? 1 : 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_POST)
|
|
|
|
#define KM_POST_EN_L 44
|
|
#define POST_WORD_OFF 8
|
|
|
|
int post_hotkeys_pressed(void)
|
|
{
|
|
return !kw_gpio_get_value(KM_POST_EN_L);
|
|
}
|
|
|
|
ulong post_word_load(void)
|
|
{
|
|
volatile void* addr = (void *) (gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF);
|
|
return in_le32(addr);
|
|
|
|
}
|
|
void post_word_store(ulong value)
|
|
{
|
|
volatile void* addr = (void *) (gd->ram_size - BOOTCOUNT_ADDR + POST_WORD_OFF);
|
|
out_le32(addr, value);
|
|
}
|
|
|
|
int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
|
|
{
|
|
*vstart = CONFIG_SYS_SDRAM_BASE;
|
|
|
|
/* we go up to relocation plus a 1 MB margin */
|
|
*size = CONFIG_SYS_TEXT_BASE - (1<<20);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_SYS_EEPROM_WREN)
|
|
int eeprom_write_enable(unsigned dev_addr, int state)
|
|
{
|
|
kw_gpio_set_value(KM_KIRKWOOD_ENV_WP, !state);
|
|
|
|
return !kw_gpio_get_value(KM_KIRKWOOD_ENV_WP);
|
|
}
|
|
#endif
|
|
|