upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Nishanth Menon e52e334e5c ARM: DRA7: Add ABB setup for all domains ... ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff <r-woodruff2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com>		9 years ago
..
Kconfig	ARM: DRA7: Enable EEPROM support	9 years ago
Makefile	omap5: Definitions for SYS_BOOT-based fallback boot device selection	10 years ago
abb.c	…
boot.c	omap5: Definitions for SYS_BOOT-based fallback boot device selection	10 years ago
config.mk	…
dra7xx_iodelay.c	ARM: OMAP5/DRA7: Expose do_set_iodelay	9 years ago
emif.c	…
hw_data.c	ARM: DRA7: Add ABB setup for all domains	9 years ago
hwinit.c	ARM: DRA72x: Add support for detection of SR2.0	9 years ago
prcm-regs.c	ARM: DRA7: Add ABB setup for all domains	9 years ago
sdram.c	ARM: DRA72: sdram: Update sdram ext phy configuration for SR2.0	9 years ago