upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
449 lines
9.1 KiB
449 lines
9.1 KiB
/*
|
|
* (C) Copyright 2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <malloc.h>
|
|
#include <asm/m5249.h>
|
|
#include <asm/io.h>
|
|
|
|
|
|
/* Prototypes */
|
|
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
|
|
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
|
|
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
|
|
|
|
|
|
#if 0
|
|
#define FPGA_DEBUG
|
|
#endif
|
|
|
|
/* predefine these here for FPGA programming (before including fpga.c) */
|
|
#define SET_FPGA(data) mbar2_writeLong(MCFSIM_GPIO1_OUT, data)
|
|
#define FPGA_DONE_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_DONE)
|
|
#define FPGA_INIT_STATE (mbar2_readLong(MCFSIM_GPIO1_READ) & CONFIG_SYS_FPGA_INIT)
|
|
#define FPGA_PROG_ACTIVE_HIGH /* on this platform is PROG active high! */
|
|
#define out32(a,b) /* nothing to do (gpio already configured) */
|
|
|
|
|
|
/* fpga configuration data - generated by bin2cc */
|
|
const unsigned char fpgadata[] =
|
|
{
|
|
#include "fpgadata.c"
|
|
};
|
|
|
|
/*
|
|
* include common fpga code (for esd boards)
|
|
*/
|
|
#include "../common/fpga.c"
|
|
|
|
|
|
int checkboard (void) {
|
|
ulong val;
|
|
uchar val8;
|
|
|
|
puts ("Board: ");
|
|
puts("esd TASREG");
|
|
val8 = ((uchar)~((uchar)mbar2_readLong(MCFSIM_GPIO1_READ) >> 4)) & 0xf;
|
|
printf(" (Switch=%1X)\n", val8);
|
|
|
|
/*
|
|
* Set LED on
|
|
*/
|
|
val = mbar2_readLong(MCFSIM_GPIO1_OUT) & ~CONFIG_SYS_GPIO1_LED;
|
|
mbar2_writeLong(MCFSIM_GPIO1_OUT, val); /* Set LED on */
|
|
|
|
return 0;
|
|
};
|
|
|
|
|
|
phys_size_t initdram (int board_type) {
|
|
unsigned long junk = 0xa5a59696;
|
|
|
|
/*
|
|
* Note:
|
|
* RC = ([(RefreshTime/#rows) / (1/BusClk)] / 16) - 1
|
|
*/
|
|
|
|
#ifdef CONFIG_SYS_FAST_CLK
|
|
/*
|
|
* Busclk=70MHz, RefreshTime=64ms, #rows=4096 (4K)
|
|
* SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=39
|
|
*/
|
|
mbar_writeShort(MCFSIM_DCR, 0x8239);
|
|
#elif CONFIG_SYS_PLL_BYPASS
|
|
/*
|
|
* Busclk=5.6448MHz, RefreshTime=64ms, #rows=8192 (8K)
|
|
* SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=02
|
|
*/
|
|
mbar_writeShort(MCFSIM_DCR, 0x8202);
|
|
#else
|
|
/*
|
|
* Busclk=36MHz, RefreshTime=64ms, #rows=4096 (4K)
|
|
* SO=1, NAM=0, COC=0, RTIM=01 (6clk refresh), RC=22 (562 bus clock cycles)
|
|
*/
|
|
mbar_writeShort(MCFSIM_DCR, 0x8222);
|
|
#endif
|
|
|
|
/*
|
|
* SDRAM starts at 0x0000_0000, CASL=10, CBM=010, PS=10 (16bit port),
|
|
* PM=1 (continuous page mode)
|
|
*/
|
|
|
|
/* RE=0 (keep auto-refresh disabled while setting up registers) */
|
|
mbar_writeLong(MCFSIM_DACR0, 0x00003324);
|
|
|
|
/* BAM=007c (bits 22,21 are bank selects; 256kB blocks) */
|
|
mbar_writeLong(MCFSIM_DMR0, 0x01fc0001);
|
|
|
|
/** Precharge sequence **/
|
|
mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */
|
|
out_be32((void *)0, junk); /* write to a memory location to init. precharge */
|
|
udelay(0x10); /* Allow several Precharge cycles */
|
|
|
|
/** Refresh Sequence **/
|
|
mbar_writeLong(MCFSIM_DACR0, 0x0000b324); /* Enable the refresh bit, DACR0[RE] (bit 15) */
|
|
udelay(0x7d0); /* Allow gobs of refresh cycles */
|
|
|
|
/** Mode Register initialization **/
|
|
mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
|
|
out_be32((void *)0x800, junk); /* Access RAM to initialize the mode register */
|
|
|
|
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
};
|
|
|
|
|
|
int testdram (void) {
|
|
/* TODO: XXX XXX XXX */
|
|
printf ("DRAM test not implemented!\n");
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
unsigned char *dst;
|
|
ulong len = sizeof(fpgadata);
|
|
int status;
|
|
int index;
|
|
int i;
|
|
uchar buf[8];
|
|
|
|
dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE);
|
|
if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
|
|
printf ("GUNZIP ERROR - must RESET board to recover\n");
|
|
do_reset (NULL, 0, 0, NULL);
|
|
}
|
|
|
|
status = fpga_boot(dst, len);
|
|
if (status != 0) {
|
|
printf("\nFPGA: Booting failed ");
|
|
switch (status) {
|
|
case ERROR_FPGA_PRG_INIT_LOW:
|
|
printf("(Timeout: INIT not low after asserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_INIT_HIGH:
|
|
printf("(Timeout: INIT not high after deasserting PROGRAM*)\n ");
|
|
break;
|
|
case ERROR_FPGA_PRG_DONE:
|
|
printf("(Timeout: DONE not high after programming FPGA)\n ");
|
|
break;
|
|
}
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("FPGA: %s\n", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
/* delayed reboot */
|
|
for (i=20; i>0; i--) {
|
|
printf("Rebooting in %2d seconds \r",i);
|
|
for (index=0;index<1000;index++)
|
|
udelay(1000);
|
|
}
|
|
putc ('\n');
|
|
do_reset(NULL, 0, 0, NULL);
|
|
}
|
|
|
|
puts("FPGA: ");
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++) {
|
|
len = dst[index];
|
|
printf("%s ", &(dst[index+1]));
|
|
index += len+3;
|
|
}
|
|
putc ('\n');
|
|
|
|
free(dst);
|
|
|
|
/*
|
|
*
|
|
*/
|
|
buf[0] = 0x00;
|
|
buf[1] = 0x32;
|
|
buf[2] = 0x3f;
|
|
i2c_write(0x38, 0, 0, buf, 3);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
#if 1 /* test-only: board specific test commands */
|
|
int i2c_probe(uchar addr);
|
|
|
|
/*
|
|
*/
|
|
int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong addr;
|
|
|
|
if (argc < 2) {
|
|
puts("ERROR!\n");
|
|
return -1;
|
|
}
|
|
|
|
addr = simple_strtol (argv[1], NULL, 16);
|
|
|
|
printf("i2c probe looping on addr 0x%lx (cntrl-c aborts)...\n", addr);
|
|
|
|
for (;;) {
|
|
i2c_probe(addr);
|
|
|
|
/* Abort if ctrl-c was pressed */
|
|
if (ctrlc()) {
|
|
puts("\nAbort\n");
|
|
return 0;
|
|
}
|
|
|
|
udelay(1000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
iploop, 2, 1, do_iploop,
|
|
"i2c probe loop <addr>",
|
|
""
|
|
);
|
|
|
|
/*
|
|
*/
|
|
int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
uchar buf[8];
|
|
|
|
out_be16((void *)0xe0000000, 0x4000);
|
|
|
|
udelay(5000); /* wait for 5ms */
|
|
|
|
buf[0] = 0x10;
|
|
buf[1] = 0x07;
|
|
buf[2] = 0x03;
|
|
i2c_write(0x10, 0, 0, buf, 3);
|
|
|
|
buf[0] = 0x10;
|
|
buf[1] = 0x01;
|
|
buf[2] = 0x80;
|
|
i2c_write(0x10, 0, 0, buf, 3);
|
|
|
|
buf[0] = 0x10;
|
|
buf[1] = 0x02;
|
|
buf[2] = 0x03;
|
|
i2c_write(0x10, 0, 0, buf, 3);
|
|
|
|
buf[0] = 0x10;
|
|
buf[1] = 0x03;
|
|
buf[2] = 0x29;
|
|
i2c_write(0x10, 0, 0, buf, 3);
|
|
|
|
buf[0] = 0x10;
|
|
buf[1] = 0x04;
|
|
buf[2] = 0x00;
|
|
i2c_write(0x10, 0, 0, buf, 3);
|
|
|
|
buf[0] = 0x10;
|
|
buf[1] = 0x05;
|
|
buf[2] = 0x00;
|
|
i2c_write(0x10, 0, 0, buf, 3);
|
|
|
|
buf[0] = 0x10;
|
|
buf[1] = 0x07;
|
|
buf[2] = 0x02;
|
|
i2c_write(0x10, 0, 0, buf, 3);
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
codec, 1, 1, do_codec,
|
|
"Enable codec",
|
|
""
|
|
);
|
|
|
|
/*
|
|
*/
|
|
int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong addr;
|
|
ulong instr;
|
|
ulong cntrl;
|
|
ulong data;
|
|
uchar buf[8];
|
|
|
|
if (argc < 5) {
|
|
puts("ERROR!\n");
|
|
return -1;
|
|
}
|
|
|
|
addr = simple_strtol (argv[1], NULL, 16);
|
|
instr = simple_strtol (argv[2], NULL, 16);
|
|
cntrl = simple_strtol (argv[3], NULL, 16);
|
|
data = simple_strtol (argv[4], NULL, 16);
|
|
|
|
buf[0] = (uchar)instr;
|
|
buf[1] = (uchar)cntrl;
|
|
buf[2] = (uchar)data;
|
|
i2c_write(addr, 0, 0, buf, 3);
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
saa, 5, 1, do_saa,
|
|
"Write to SAA1064 <addr> <instr> <cntrl> <data>",
|
|
""
|
|
);
|
|
|
|
/*
|
|
*/
|
|
int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong addr;
|
|
ulong data0;
|
|
ulong data1;
|
|
ulong data2;
|
|
ulong data3;
|
|
uchar buf[8];
|
|
int cnt;
|
|
|
|
if (argc < 3) {
|
|
puts("ERROR!\n");
|
|
return -1;
|
|
}
|
|
|
|
addr = simple_strtol (argv[1], NULL, 16);
|
|
cnt = simple_strtol (argv[2], NULL, 16);
|
|
data0 = simple_strtol (argv[3], NULL, 16);
|
|
data1 = simple_strtol (argv[4], NULL, 16);
|
|
data2 = simple_strtol (argv[5], NULL, 16);
|
|
data3 = simple_strtol (argv[6], NULL, 16);
|
|
|
|
printf("Writing %d bytes to device %lx!\n", cnt, addr);
|
|
buf[0] = (uchar)data0;
|
|
buf[1] = (uchar)data1;
|
|
buf[2] = (uchar)data2;
|
|
buf[3] = (uchar)data3;
|
|
i2c_write(addr, 0, 0, buf, cnt);
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
iwrite, 6, 1, do_iwrite,
|
|
"Write n bytes to I2C-device",
|
|
"addr cnt data0 ... datan"
|
|
);
|
|
|
|
/*
|
|
*/
|
|
int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong addr;
|
|
ulong cnt;
|
|
uchar buf[32];
|
|
int i;
|
|
|
|
if (argc < 3) {
|
|
puts("ERROR!\n");
|
|
return -1;
|
|
}
|
|
|
|
addr = simple_strtol (argv[1], NULL, 16);
|
|
cnt = simple_strtol (argv[2], NULL, 16);
|
|
|
|
i2c_read(addr, 0, 0, buf, cnt);
|
|
printf("I2C Data:");
|
|
for (i=0; i<cnt; i++) {
|
|
printf(" %02X", buf[i]);
|
|
}
|
|
printf("\n");
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
iread, 3, 1, do_iread,
|
|
"Read from I2C <addr> <cnt>",
|
|
""
|
|
);
|
|
|
|
/*
|
|
*/
|
|
int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
|
|
{
|
|
ulong addr;
|
|
uchar buf[32];
|
|
int cnt;
|
|
|
|
if (argc < 2) {
|
|
puts("ERROR!\n");
|
|
return -1;
|
|
}
|
|
|
|
addr = simple_strtol (argv[1], NULL, 16);
|
|
cnt = 1;
|
|
|
|
printf("iread looping on addr 0x%lx (cntrl-c aborts)...\n", addr);
|
|
|
|
for (;;) {
|
|
i2c_read(addr, 0, 0, buf, cnt);
|
|
|
|
/* Abort if ctrl-c was pressed */
|
|
if (ctrlc()) {
|
|
puts("\nAbort\n");
|
|
return 0;
|
|
}
|
|
|
|
udelay(3000);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
U_BOOT_CMD(
|
|
ireadl, 2, 1, do_ireadl,
|
|
"Read-loop from I2C <addr>",
|
|
""
|
|
);
|
|
#endif
|
|
|