upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
321 lines
8.9 KiB
321 lines
8.9 KiB
/*
|
|
* (C) Copyright 2007-2008
|
|
* Stelian Pop <stelian.pop@leadtechdesign.com>
|
|
* Lead Tech Design <www.leadtechdesign.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/sizes.h>
|
|
#include <asm/arch/at91sam9263.h>
|
|
#include <asm/arch/at91sam9263_matrix.h>
|
|
#include <asm/arch/at91sam9_smc.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/at91_rstc.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <lcd.h>
|
|
#include <atmel_lcdc.h>
|
|
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
|
|
#include <net.h>
|
|
#endif
|
|
#include <netdev.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
/*
|
|
* Miscelaneous platform dependent initialisations
|
|
*/
|
|
|
|
static void at91sam9263ek_serial_hw_init(void)
|
|
{
|
|
#ifdef CONFIG_USART0
|
|
at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
|
|
at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0);
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART1
|
|
at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
|
|
at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1);
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART2
|
|
at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
|
|
at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2);
|
|
#endif
|
|
|
|
#ifdef CONFIG_USART3 /* DBGU */
|
|
at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
|
|
at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
static void at91sam9263ek_nand_hw_init(void)
|
|
{
|
|
unsigned long csa;
|
|
|
|
/* Enable CS3 */
|
|
csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
|
|
at91_sys_write(AT91_MATRIX_EBI0CSA,
|
|
csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
|
|
|
|
/* Configure SMC CS3 for NAND/SmartMedia */
|
|
at91_sys_write(AT91_SMC_SETUP(3),
|
|
AT91_SMC_NWESETUP_(1) | AT91_SMC_NCS_WRSETUP_(0) |
|
|
AT91_SMC_NRDSETUP_(1) | AT91_SMC_NCS_RDSETUP_(0));
|
|
at91_sys_write(AT91_SMC_PULSE(3),
|
|
AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) |
|
|
AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3));
|
|
at91_sys_write(AT91_SMC_CYCLE(3),
|
|
AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5));
|
|
at91_sys_write(AT91_SMC_MODE(3),
|
|
AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
|
|
AT91_SMC_EXNWMODE_DISABLE |
|
|
#ifdef CONFIG_SYS_NAND_DBW_16
|
|
AT91_SMC_DBW_16 |
|
|
#else /* CONFIG_SYS_NAND_DBW_8 */
|
|
AT91_SMC_DBW_8 |
|
|
#endif
|
|
AT91_SMC_TDF_(2));
|
|
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA |
|
|
1 << AT91SAM9263_ID_PIOCDE);
|
|
|
|
/* Configure RDY/BSY */
|
|
at91_set_gpio_input(AT91_PIN_PA22, 1);
|
|
|
|
/* Enable NandFlash */
|
|
at91_set_gpio_output(AT91_PIN_PD15, 1);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
static void at91sam9263ek_spi_hw_init(void)
|
|
{
|
|
at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */
|
|
|
|
at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
|
|
at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
|
|
at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
|
|
|
|
/* Enable clock */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_MACB
|
|
static void at91sam9263ek_macb_hw_init(void)
|
|
{
|
|
/* Enable clock */
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC);
|
|
|
|
/*
|
|
* Disable pull-up on:
|
|
* RXDV (PC25) => PHY normal mode (not Test mode)
|
|
* ERX0 (PE25) => PHY ADDR0
|
|
* ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0
|
|
*
|
|
* PHY has internal pull-down
|
|
*/
|
|
writel(pin_to_mask(AT91_PIN_PC25),
|
|
pin_to_controller(AT91_PIN_PC0) + PIO_PUDR);
|
|
writel(pin_to_mask(AT91_PIN_PE25) |
|
|
pin_to_mask(AT91_PIN_PE26),
|
|
pin_to_controller(AT91_PIN_PE0) + PIO_PUDR);
|
|
|
|
/* Need to reset PHY -> 500ms reset */
|
|
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
|
(AT91_RSTC_ERSTL & (0x0D << 8)) |
|
|
AT91_RSTC_URSTEN);
|
|
|
|
at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST);
|
|
|
|
/* Wait for end hardware reset */
|
|
while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL));
|
|
|
|
/* Restore NRST value */
|
|
at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY |
|
|
(AT91_RSTC_ERSTL & (0x0 << 8)) |
|
|
AT91_RSTC_URSTEN);
|
|
|
|
/* Re-enable pull-up */
|
|
writel(pin_to_mask(AT91_PIN_PC25),
|
|
pin_to_controller(AT91_PIN_PC0) + PIO_PUER);
|
|
writel(pin_to_mask(AT91_PIN_PE25) |
|
|
pin_to_mask(AT91_PIN_PE26),
|
|
pin_to_controller(AT91_PIN_PE0) + PIO_PUER);
|
|
|
|
at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
|
|
at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
|
|
at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
|
|
at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
|
|
at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
|
|
at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
|
|
at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
|
|
at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
|
|
at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
|
|
at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
|
|
|
|
#ifndef CONFIG_RMII
|
|
at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
|
|
at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
|
|
at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
|
|
at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
|
|
at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
|
|
at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
|
|
at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
|
|
at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
|
|
#endif
|
|
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
static void at91sam9263ek_uhp_hw_init(void)
|
|
{
|
|
/* Enable VBus on UHP ports */
|
|
at91_set_gpio_output(AT91_PIN_PA21, 0);
|
|
at91_set_gpio_output(AT91_PIN_PA24, 0);
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_LCD
|
|
vidinfo_t panel_info = {
|
|
vl_col: 240,
|
|
vl_row: 320,
|
|
vl_clk: 4965000,
|
|
vl_sync: ATMEL_LCDC_INVLINE_INVERTED |
|
|
ATMEL_LCDC_INVFRAME_INVERTED,
|
|
vl_bpix: 3,
|
|
vl_tft: 1,
|
|
vl_hsync_len: 5,
|
|
vl_left_margin: 1,
|
|
vl_right_margin:33,
|
|
vl_vsync_len: 1,
|
|
vl_upper_margin:1,
|
|
vl_lower_margin:0,
|
|
mmio: AT91SAM9263_LCDC_BASE,
|
|
};
|
|
|
|
void lcd_enable(void)
|
|
{
|
|
at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */
|
|
}
|
|
|
|
void lcd_disable(void)
|
|
{
|
|
at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */
|
|
}
|
|
|
|
static void at91sam9263ek_lcd_hw_init(void)
|
|
{
|
|
at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
|
|
at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
|
|
at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
|
|
at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
|
|
at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
|
|
at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
|
|
at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
|
|
at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
|
|
at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
|
|
at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
|
|
at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
|
|
at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
|
|
at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
|
|
at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
|
|
at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
|
|
at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
|
|
at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
|
|
at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
|
|
at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
|
|
at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
|
|
at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
|
|
at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
|
|
|
|
at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC);
|
|
|
|
gd->fb_base = AT91SAM9263_SRAM0_BASE;
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
/* Enable Ctrlc */
|
|
console_init_f();
|
|
|
|
/* arch number of AT91SAM9263EK-Board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK;
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
|
|
|
at91sam9263ek_serial_hw_init();
|
|
#ifdef CONFIG_CMD_NAND
|
|
at91sam9263ek_nand_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_HAS_DATAFLASH
|
|
at91sam9263ek_spi_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_MACB
|
|
at91sam9263ek_macb_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_USB_OHCI_NEW
|
|
at91sam9263ek_uhp_hw_init();
|
|
#endif
|
|
#ifdef CONFIG_LCD
|
|
at91sam9263ek_lcd_hw_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_RESET_PHY_R
|
|
void reset_phy(void)
|
|
{
|
|
#ifdef CONFIG_MACB
|
|
/*
|
|
* Initialize ethernet HW addr prior to starting Linux,
|
|
* needed for nfsroot
|
|
*/
|
|
eth_init(gd->bd);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
int rc = 0;
|
|
#ifdef CONFIG_MACB
|
|
rc = macb_eth_initialize(0, (void *)AT91_BASE_EMAC, 0x00);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|