upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
146 lines
4.4 KiB
146 lines
4.4 KiB
/*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* (C) Copyright 2003 Motorola Inc.
|
|
* Xianghua Xiao, (X.Xiao@motorola.com)
|
|
*
|
|
* (C) Copyright 2000
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <ppc_asm.tmpl>
|
|
#include <asm/processor.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* --------------------------------------------------------------- */
|
|
|
|
void get_sys_info (sys_info_t * sysInfo)
|
|
{
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
uint plat_ratio,e500_ratio,half_freqSystemBus;
|
|
|
|
plat_ratio = (gur->porpllsr) & 0x0000003e;
|
|
plat_ratio >>= 1;
|
|
sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
|
|
e500_ratio = (gur->porpllsr) & 0x003f0000;
|
|
e500_ratio >>= 16;
|
|
|
|
/* Divide before multiply to avoid integer
|
|
* overflow for processor speeds above 2GHz */
|
|
half_freqSystemBus = sysInfo->freqSystemBus/2;
|
|
sysInfo->freqProcessor = e500_ratio*half_freqSystemBus;
|
|
|
|
/* Note: freqDDRBus is the MCLK frequency, not the data rate. */
|
|
sysInfo->freqDDRBus = sysInfo->freqSystemBus;
|
|
|
|
#ifdef CONFIG_DDR_CLK_FREQ
|
|
{
|
|
u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
|
|
>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
|
|
if (ddr_ratio != 0x7)
|
|
sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
int get_clocks (void)
|
|
{
|
|
sys_info_t sys_info;
|
|
#ifdef CONFIG_MPC8544
|
|
volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
|
|
#endif
|
|
#if defined(CONFIG_CPM2)
|
|
volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
|
|
uint sccr, dfbrg;
|
|
|
|
/* set VCO = 4 * BRG */
|
|
cpm->im_cpm_intctl.sccr &= 0xfffffffc;
|
|
sccr = cpm->im_cpm_intctl.sccr;
|
|
dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
|
|
#endif
|
|
get_sys_info (&sys_info);
|
|
gd->cpu_clk = sys_info.freqProcessor;
|
|
gd->bus_clk = sys_info.freqSystemBus;
|
|
gd->mem_clk = sys_info.freqDDRBus;
|
|
|
|
/*
|
|
* The base clock for I2C depends on the actual SOC. Unfortunately,
|
|
* there is no pattern that can be used to determine the frequency, so
|
|
* the only choice is to look up the actual SOC number and use the value
|
|
* for that SOC. This information is taken from application note
|
|
* AN2919.
|
|
*/
|
|
#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
|
|
defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
|
|
gd->i2c1_clk = sys_info.freqSystemBus;
|
|
#elif defined(CONFIG_MPC8544)
|
|
/*
|
|
* On the 8544, the I2C clock is the same as the SEC clock. This can be
|
|
* either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
|
|
* 4.4.3.3 of the 8544 RM. Note that this might actually work for all
|
|
* 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
|
|
* PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
|
|
*/
|
|
if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
|
|
gd->i2c1_clk = sys_info.freqSystemBus / 3;
|
|
else
|
|
gd->i2c1_clk = sys_info.freqSystemBus / 2;
|
|
#else
|
|
/* Most 85xx SOCs use CCB/2, so this is the default behavior. */
|
|
gd->i2c1_clk = sys_info.freqSystemBus / 2;
|
|
#endif
|
|
gd->i2c2_clk = gd->i2c1_clk;
|
|
|
|
#if defined(CONFIG_MPC8536)
|
|
gd->sdhc_clk = gd->bus_clk / 2;
|
|
#endif
|
|
|
|
#if defined(CONFIG_CPM2)
|
|
gd->vco_out = 2*sys_info.freqSystemBus;
|
|
gd->cpm_clk = gd->vco_out / 2;
|
|
gd->scc_clk = gd->vco_out / 4;
|
|
gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
|
|
#endif
|
|
|
|
if(gd->cpu_clk != 0) return (0);
|
|
else return (1);
|
|
}
|
|
|
|
|
|
/********************************************
|
|
* get_bus_freq
|
|
* return system bus freq in Hz
|
|
*********************************************/
|
|
ulong get_bus_freq (ulong dummy)
|
|
{
|
|
return gd->bus_clk;
|
|
}
|
|
|
|
/********************************************
|
|
* get_ddr_freq
|
|
* return ddr bus freq in Hz
|
|
*********************************************/
|
|
ulong get_ddr_freq (ulong dummy)
|
|
{
|
|
return gd->mem_clk;
|
|
}
|
|
|