upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
454 lines
12 KiB
454 lines
12 KiB
/*
|
|
* (C) Copyright 2003-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2006
|
|
* Eric Schumann, Phytec Messatechnik GmbH
|
|
*
|
|
* (C) Copyright 2009
|
|
* Jon Smirl <jonsmirl@gmail.com>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Eric Millbrandt, DEKA Research and Development Corporation
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_BOARDINFO "galaxy5200"
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
|
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFFF00000 boot high (standard configuration)
|
|
* 0xFE000000 boot low
|
|
* 0x00100000 boot from RAM (for testing only) does not work
|
|
*/
|
|
#ifdef CONFIG_galaxy5200_LOWBOOT
|
|
#define CONFIG_SYS_TEXT_BASE 0xFE000000
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */
|
|
#endif
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 -> */
|
|
/* define gps port conf. */
|
|
/* register later on to */
|
|
/* enable UART function! */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_SNTP
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_USB
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_FAT
|
|
|
|
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
|
|
|
|
#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low */
|
|
#define CONFIG_SYS_LOWBOOT 1
|
|
#endif
|
|
/* RAMBOOT will be defined automatically in memory section */
|
|
|
|
#define MTDIDS_DEFAULT "nor0=physmap-flash.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \
|
|
"1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 10 /* autoboot after 10 seconds */
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow stopping of boot process */
|
|
/* even with bootdelay=0 */
|
|
#define CONFIG_BOOT_RETRY_TIME 120 /* Reset if no command is entered */
|
|
#define CONFIG_RESET_TO_RETRY
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Welcome to U-Boot;"\
|
|
"echo"
|
|
|
|
#define CONFIG_BOOTCOMMAND "go ff300004 0; go ff300004 2 2;" \
|
|
"bootm ff040000 ff900000 fffc0000"
|
|
#define CONFIG_BOOTARGS "console=ttyPSC0,115200"
|
|
#define CONFIG_EXTRA_ENV_SETTINGS "epson=yes\0"
|
|
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
#define CONFIG_SYS_XLB_PIPELINING 1
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_I2C_INIT_MPC5XXX /* Reset devices on i2c bus */
|
|
|
|
/*
|
|
* EEPROM CAT24WC32 configuration
|
|
*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* 1010100x */
|
|
#define CONFIG_SYS_I2C_FACT_ADDR 0x52 /* EEPROM CAT24WC32 */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
|
|
#define CONFIG_SYS_EEPROM_SIZE 4096
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
|
|
|
|
/*
|
|
* RTC configuration
|
|
*/
|
|
#define RTC
|
|
#define CONFIG_RTC_DS3231 1
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xfe000000
|
|
/*
|
|
* The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
|
|
* variable defined
|
|
*/
|
|
#define CONFIG_SYS_FLASH_SIZE 0x02000000
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 259 /* max num of sects on one chip */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
|
|
/* (= chip selects) */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
|
|
/*
|
|
* Use hardware protection. This seems required, as the BDI uses hardware
|
|
* protection. Without this, U-Boot can't work with this sectors as its
|
|
* protection is software only by default.
|
|
*/
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
|
|
#define CONFIG_ENV_IS_IN_EEPROM 1
|
|
#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */
|
|
/* beginning of the EEPROM */
|
|
#define CONFIG_ENV_SIZE CONFIG_SYS_EEPROM_SIZE
|
|
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*
|
|
* SDRAM configuration
|
|
*/
|
|
#define SDRAM_DDR 1
|
|
#define SDRAM_MODE 0x018D0000
|
|
#define SDRAM_EMODE 0x40090000
|
|
#define SDRAM_CONTROL 0x71500F00
|
|
#define SDRAM_CONFIG1 0x73711930
|
|
#define SDRAM_CONFIG2 0x47770000
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */
|
|
/* bootloader or debugger config */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
|
|
/* Use SRAM until RAM will be available */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
|
|
/* End of used area in SPRAM */
|
|
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
|
|
|
|
/* Size in bytes reserved for initial data */
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 128
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
|
|
CONFIG_SYS_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
# define CONFIG_SYS_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/* Chip Select configuration for NAND flash */
|
|
#define CONFIG_SYS_CS1_START 0x20000000
|
|
#define CONFIG_SYS_CS1_SIZE 0x90000
|
|
#define CONFIG_SYS_CS1_CFG 0x00025b00
|
|
|
|
/* Chip Select configuration for Epson S1D13513 */
|
|
#define CONFIG_SYS_CS3_START 0x10000000
|
|
#define CONFIG_SYS_CS3_SIZE 0x400000
|
|
#define CONFIG_SYS_CS3_CFG 0xffff3d10
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_MPC5xxx_FEC_MII100
|
|
#define CONFIG_PHY_ADDR 0x01
|
|
#define CONFIG_NO_AUTOLOAD 1
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*
|
|
* GPS port configuration
|
|
*
|
|
* [29:31] = 01x
|
|
* AC97 on PSC1
|
|
* PSC1_0 -> AC97 SDATA out
|
|
* PSC1_1 -> AC97 SDTA in
|
|
* PSC1_2 -> AC97 SYNC out
|
|
* PSC1_3 -> AC97 bitclock out
|
|
* PSC1_4 -> AC97 reset out
|
|
*
|
|
* [28] = Reserved
|
|
*
|
|
* [25:27] = 110
|
|
* SPI on PSC2
|
|
* PSC2_0 -> MOSI
|
|
* PSC2_1 -> MISO
|
|
* PSC2_2 -> n/a
|
|
* PSC2_3 -> CLK
|
|
* PSC2_4 -> SS
|
|
*
|
|
* [24] = Reserved
|
|
*
|
|
* [20:23] = 0001
|
|
* USB on PSC3
|
|
* PSC3_0 -> USB_OE OE out
|
|
* PSC3_1 -> USB_TXN Tx- out
|
|
* PSC3_2 -> USB_TXP Tx+ out
|
|
* PSC3_3 -> USB_TXD
|
|
* PSC3_4 -> USB_RXP Rx+ in
|
|
* PSC3_5 -> USB_RXN Rx- in
|
|
* PSC3_6 -> USB_PWR PortPower out
|
|
* PSC3_7 -> USB_SPEED speed out
|
|
* PSC3_8 -> USB_SUSPEND suspend
|
|
* PSC3_9 -> USB_OVRCURNT overcurrent in
|
|
*
|
|
* [18:19] = 10
|
|
* Two UARTs
|
|
*
|
|
* [17] = 0
|
|
* USB differential mode
|
|
*
|
|
* [16] = 1
|
|
* PCI disabled
|
|
*
|
|
* [12:15] = 0101
|
|
* Ethernet 100Mbit with MD
|
|
* ETH_0 -> ETH Txen
|
|
* ETH_1 -> ETH TxD0
|
|
* ETH_2 -> ETH TxD1
|
|
* ETH_3 -> ETH TxD2
|
|
* ETH_4 -> ETH TxD3
|
|
* ETH_5 -> ETH Txerr
|
|
* ETH_6 -> ETH MDC
|
|
* ETH_7 -> ETH MDIO
|
|
* ETH_8 -> ETH RxDv
|
|
* ETH_9 -> ETH RxCLK
|
|
* ETH_10 -> ETH Collision
|
|
* ETH_11 -> ETH TxD
|
|
* ETH_12 -> ETH RxD0
|
|
* ETH_13 -> ETH RxD1
|
|
* ETH_14 -> ETH RxD2
|
|
* ETH_15 -> ETH RxD3
|
|
* ETH_16 -> ETH Rxerr
|
|
* ETH_17 -> ETH CRS
|
|
*
|
|
* [9:11] = 111
|
|
* SPI on PSC6
|
|
* PSC6_0 -> MISO
|
|
* PSC6_1 -> SS#
|
|
* PSC6_2 -> MOSI
|
|
* PSC6_3 -> CLK
|
|
*
|
|
* [8] = 0
|
|
* IrDA/USB 48MHz clock generated internally
|
|
*
|
|
* [6:7] = 01
|
|
* ATA chip selects on csb_4/5
|
|
* CSB_4 -> ATA_CS0 out
|
|
* CSB_5 -> ATA_CS1 out
|
|
*
|
|
* [5] = 1
|
|
* PSC3_4 is used as CS6
|
|
*
|
|
* [4] = 1
|
|
* PSC3_5 is used as CS7
|
|
*
|
|
* [2:3] = 00
|
|
* No Alternatives
|
|
*
|
|
* [1] = 0
|
|
* gpio_wkup_7 is GPIO
|
|
*
|
|
* [0] = 0
|
|
* gpio_wkup_6 is GPIO
|
|
*
|
|
*/
|
|
#define CONFIG_SYS_GPS_PORT_CONFIG 0x0d75a162
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
/* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
|
|
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
#define CONFIG_DISPLAY_BOARDINFO 1
|
|
|
|
#define CONFIG_SYS_HUSH_PARSER 1
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
|
|
#define CONFIG_CRC32_VERIFY 1
|
|
|
|
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
|
|
CONFIG_BOOTP_DNS | \
|
|
CONFIG_BOOTP_DNS2 | \
|
|
CONFIG_BOOTP_SEND_HOSTNAME )
|
|
|
|
#define CONFIG_VERSION_VARIABLE 1
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
|
|
/* no burst access on the LPB */
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
/* one deadcycle for the 33MHz statemachine */
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x33333331
|
|
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x0002d900
|
|
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
|
|
|
|
/*
|
|
* USB settings
|
|
*/
|
|
#define CONFIG_USB_CLOCK 0x0001bbbb
|
|
/* USB is on PSC3 */
|
|
#define CONFIG_PSC3_USB
|
|
#define CONFIG_USB_CONFIG 0x00000100
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
/*
|
|
* IDE/ATA stuff Supports IDE harddisk
|
|
*/
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
#define CONFIG_IDE_RESET 1 /* reset for ide supported */
|
|
#define CONFIG_IDE_PREINIT
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
/* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
|
|
/* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
|
/* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
|
|
/* Interval between registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
#define CONFIG_ATAPI 1
|
|
|
|
/* we enable IDE and FAT support, so we also need partition support */
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/*
|
|
* Open Firmware flat tree
|
|
*/
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
|
|
#define OF_CPU "PowerPC,5200@0"
|
|
#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN
|
|
#define OF_SOC "soc5200@f0000000"
|
|
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2600"
|
|
|
|
#endif /* __CONFIG_H */
|
|
|