upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
807 lines
22 KiB
807 lines
22 KiB
/**************************************************************************
|
|
Etherboot - BOOTP/TFTP Bootstrap Program
|
|
Skeleton NIC driver for Etherboot
|
|
***************************************************************************/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
/*
|
|
* This file is a modified version from the Galileo polled mode
|
|
* network driver for the ethernet contained within the GT64260
|
|
* chip. It has been modified to fit into the U-Boot framework, from
|
|
* the original (etherboot) setup. Also, additional cleanup and features
|
|
* were added.
|
|
*
|
|
* - Josh Huber <huber@mclx.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <galileo/gt64260R.h>
|
|
#include <galileo/core.h>
|
|
#include <asm/cache.h>
|
|
#include <miiphy.h>
|
|
#include <net.h>
|
|
|
|
#include "eth.h"
|
|
#include "eth_addrtbl.h"
|
|
|
|
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
|
|
|
|
#define GT6426x_ETH_BUF_SIZE 1536
|
|
|
|
/* if you like verbose output, turn this on! */
|
|
#undef DEBUG
|
|
|
|
/* Restart autoneg if we detect link is up on phy init. */
|
|
|
|
/*
|
|
* The GT doc's say that after Rst is deasserted, and the PHY
|
|
* reports autoneg complete, it runs through its autoneg
|
|
* procedures. This doesn't seem to be the case for MII
|
|
* PHY's. To work around this check for link up && autoneg
|
|
* complete when initilizing the port. If they are both set,
|
|
* then restart PHY autoneg. Of course, it may be something
|
|
* completly different.
|
|
*/
|
|
#ifdef CONFIG_ETHER_PORT_MII
|
|
# define RESTART_AUTONEG
|
|
#endif
|
|
|
|
/* do this if you dont want to use snooping */
|
|
#define USE_SOFTWARE_CACHE_MANAGEMENT
|
|
|
|
#ifdef USE_SOFTWARE_CACHE_MANAGEMENT
|
|
#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
|
|
#define FLUSH_AND_INVALIDATE_DCACHE(a,b) if(dcache_status()){flush_dcache_range((u32)(a),(u32)(b));}
|
|
#define INVALIDATE_DCACHE(a,b) if(dcache_status()){invalidate_dcache_range((u32)(a),(u32)(b));}
|
|
#else
|
|
/* bummer - w/o flush, nothing works, even with snooping - FIXME */
|
|
/* #define FLUSH_DCACHE(a,b) */
|
|
#define FLUSH_DCACHE(a,b) if(dcache_status()){clean_dcache_range((u32)(a),(u32)(b));}
|
|
#define FLUSH_AND_INVALIDATE_DCACHE(a,b)
|
|
#define INVALIDATE_DCACHE(a,b)
|
|
#endif
|
|
struct eth_dev_s {
|
|
eth0_tx_desc_single *eth_tx_desc;
|
|
eth0_rx_desc_single *eth_rx_desc;
|
|
char *eth_tx_buffer;
|
|
char *eth_rx_buffer[NR];
|
|
int tdn, rdn;
|
|
int dev;
|
|
unsigned int reg_base;
|
|
};
|
|
|
|
|
|
#ifdef CONFIG_INTEL_LXT97X
|
|
/* for intel LXT972 */
|
|
static const char ether_port_phy_addr[3]={0,1,2};
|
|
#else
|
|
static const char ether_port_phy_addr[3]={4,5,6};
|
|
#endif
|
|
|
|
/* MII PHY access routines are common for all i/f, use gal_ent0 */
|
|
#define GT6426x_MII_DEVNAME "gal_enet0"
|
|
|
|
int gt6426x_miiphy_read(char *devname, unsigned char phy,
|
|
unsigned char reg, unsigned short *val);
|
|
|
|
static inline unsigned short
|
|
miiphy_read_ret(unsigned short phy, unsigned short reg)
|
|
{
|
|
unsigned short val;
|
|
gt6426x_miiphy_read(GT6426x_MII_DEVNAME,phy,reg,&val);
|
|
return val;
|
|
}
|
|
|
|
|
|
/**************************************************************************
|
|
RESET - Reset adapter
|
|
***************************************************************************/
|
|
void
|
|
gt6426x_eth_reset(void *v)
|
|
{
|
|
/* we should do something here...
|
|
struct eth_device *wp = (struct eth_device *)v;
|
|
struct eth_dev_s *p = wp->priv;
|
|
*/
|
|
|
|
printf ("RESET\n");
|
|
/* put the card in its initial state */
|
|
}
|
|
|
|
static void gt6426x_handle_SMI(struct eth_dev_s *p, unsigned int icr)
|
|
{
|
|
#ifdef DEBUG
|
|
printf("SMI interrupt: ");
|
|
|
|
if(icr&0x20000000) {
|
|
printf("SMI done\n");
|
|
}
|
|
#endif
|
|
|
|
if(icr&0x10000000) {
|
|
unsigned int psr;
|
|
psr=GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + p->reg_base);
|
|
#ifdef DEBUG
|
|
printf("PHY state change:\n"
|
|
" GT:%s:%s:%s:%s\n",
|
|
psr&1?"100":" 10",
|
|
psr&8?" Link":"nLink",
|
|
psr&2?"FD":"HD",
|
|
psr&4?" FC":"nFC");
|
|
|
|
#ifdef CONFIG_INTEL_LXT97X /* non-standard mii reg (intel lxt972a) */
|
|
{
|
|
unsigned short mii_11;
|
|
mii_11=miiphy_read_ret(ether_port_phy_addr[p->dev],0x11);
|
|
|
|
printf(" mii:%s:%s:%s:%s %s:%s %s\n",
|
|
mii_11&(1<<14)?"100":" 10",
|
|
mii_11&(1<<10)?" Link":"nLink",
|
|
mii_11&(1<<9)?"FD":"HD",
|
|
mii_11&(1<<4)?" FC":"nFC",
|
|
|
|
mii_11&(1<<7)?"ANc":"ANnc",
|
|
mii_11&(1<<8)?"AN":"Manual",
|
|
""
|
|
);
|
|
}
|
|
#endif /* CONFIG_INTEL_LXT97X */
|
|
#endif /* DEBUG */
|
|
}
|
|
}
|
|
|
|
static int
|
|
gt6426x_eth_receive(struct eth_dev_s *p,unsigned int icr)
|
|
{
|
|
int eth_len=0;
|
|
char *eth_data;
|
|
|
|
eth0_rx_desc_single *rx=&p->eth_rx_desc[(p->rdn)];
|
|
|
|
INVALIDATE_DCACHE((unsigned int)rx,(unsigned int)(rx+1));
|
|
|
|
if (rx->command_status & 0x80000000) {
|
|
return 0; /* No packet received */
|
|
}
|
|
|
|
eth_len = (unsigned int)
|
|
(rx->buff_size_byte_count) & 0x0000ffff;
|
|
eth_data = (char *) p->eth_rx_buffer[p->rdn];
|
|
|
|
#ifdef DEBUG
|
|
if (eth_len) {
|
|
printf ("%s: Recived %d byte Packet @ 0x%p\n",
|
|
__FUNCTION__, eth_len, eth_data);
|
|
}
|
|
#endif
|
|
/*
|
|
* packet is now in:
|
|
* eth0_rx_buffer[RDN_ETH0];
|
|
*/
|
|
|
|
/* let the upper layer handle the packet */
|
|
NetReceive ((uchar *)eth_data, eth_len);
|
|
|
|
rx->buff_size_byte_count = GT6426x_ETH_BUF_SIZE<<16;
|
|
|
|
|
|
/* GT96100 Owner */
|
|
rx->command_status = 0x80000000;
|
|
|
|
FLUSH_DCACHE((unsigned int)rx,(unsigned int)(rx+1));
|
|
|
|
p->rdn ++;
|
|
if (p->rdn == NR) {p->rdn = 0;}
|
|
|
|
sync();
|
|
|
|
/* Start Rx*/
|
|
GT_REG_WRITE (ETHERNET0_SDMA_COMMAND_REGISTER + p->reg_base, 0x00000080);
|
|
|
|
#ifdef DEBUG
|
|
{
|
|
int i;
|
|
for (i=0;i<12;i++) {
|
|
printf(" %02x", eth_data[i]);
|
|
}
|
|
}
|
|
printf(": %d bytes\n", eth_len);
|
|
#endif
|
|
INVALIDATE_DCACHE((unsigned int)eth_data,
|
|
(unsigned int)eth_data+eth_len);
|
|
return eth_len;
|
|
}
|
|
|
|
/**************************************************************************
|
|
POLL - look for an rx frame, handle other conditions
|
|
***************************************************************************/
|
|
int
|
|
gt6426x_eth_poll(void *v)
|
|
{
|
|
struct eth_device *wp = (struct eth_device *)v;
|
|
struct eth_dev_s *p = wp->priv;
|
|
unsigned int icr=GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER + p->reg_base);
|
|
|
|
if(icr) {
|
|
GT_REG_WRITE(ETHERNET0_INTERRUPT_CAUSE_REGISTER +p->reg_base, 0);
|
|
#ifdef DEBUG
|
|
printf("poll got ICR %08x\n", icr);
|
|
#endif
|
|
/* SMI done or PHY state change*/
|
|
if(icr&0x30000000) gt6426x_handle_SMI(p, icr);
|
|
}
|
|
/* always process. We aren't using RX interrupts */
|
|
return gt6426x_eth_receive(p, icr);
|
|
}
|
|
|
|
/**************************************************************************
|
|
TRANSMIT - Transmit a frame
|
|
***************************************************************************/
|
|
int
|
|
gt6426x_eth_transmit(void *v, volatile char *p, unsigned int s)
|
|
{
|
|
struct eth_device *wp = (struct eth_device *)v;
|
|
struct eth_dev_s *dev = (struct eth_dev_s *)wp->priv;
|
|
#ifdef DEBUG
|
|
unsigned int old_command_stat,old_psr;
|
|
#endif
|
|
eth0_tx_desc_single *tx=&dev->eth_tx_desc[dev->tdn];
|
|
|
|
/* wait for tx to be ready */
|
|
INVALIDATE_DCACHE((unsigned int)tx,(unsigned int)(tx+1));
|
|
while (tx->command_status & 0x80000000) {
|
|
int i;
|
|
for(i=0;i<1000;i++);
|
|
INVALIDATE_DCACHE((unsigned int)tx,(unsigned int)(tx+1));
|
|
}
|
|
|
|
GT_REG_WRITE (ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 + dev->reg_base,
|
|
(unsigned int)tx);
|
|
|
|
#ifdef DEBUG
|
|
printf("copying to tx_buffer [%p], length %x, desc = %p\n",
|
|
dev->eth_tx_buffer, s, dev->eth_tx_desc);
|
|
#endif
|
|
memcpy(dev->eth_tx_buffer, (char *) p, s);
|
|
|
|
tx->buff_pointer = (uchar *)dev->eth_tx_buffer;
|
|
tx->bytecount_reserved = ((__u16)s) << 16;
|
|
|
|
/* 31 - own
|
|
* 22 - gencrc
|
|
* 18:16 - pad, last, first */
|
|
tx->command_status = (1<<31) | (1<<22) | (7<<16);
|
|
#if 0
|
|
/* FEr #18 */
|
|
tx->next_desc = NULL;
|
|
#else
|
|
tx->next_desc =
|
|
(struct eth0_tx_desc_struct *)
|
|
&dev->eth_tx_desc[(dev->tdn+1)%NT].bytecount_reserved;
|
|
|
|
/* cpu owned */
|
|
dev->eth_tx_desc[(dev->tdn+1)%NT].command_status = (7<<16); /* pad, last, first */
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
old_command_stat=tx->command_status,
|
|
old_psr=GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + dev->reg_base);
|
|
#endif
|
|
|
|
FLUSH_DCACHE((unsigned int)tx,
|
|
(unsigned int)&dev->eth_tx_desc[(dev->tdn+2)%NT]);
|
|
|
|
FLUSH_DCACHE((unsigned int)dev->eth_tx_buffer,(unsigned int)dev->eth_tx_buffer+s);
|
|
|
|
GT_REG_WRITE(ETHERNET0_SDMA_COMMAND_REGISTER + dev->reg_base, 0x01000000);
|
|
|
|
#ifdef DEBUG
|
|
{
|
|
unsigned int command_stat=0;
|
|
printf("cmd_stat: %08x PSR: %08x\n", old_command_stat, old_psr);
|
|
/* wait for tx to be ready */
|
|
do {
|
|
unsigned int psr=GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + dev->reg_base);
|
|
command_stat=tx->command_status;
|
|
if(command_stat!=old_command_stat || psr !=old_psr) {
|
|
printf("cmd_stat: %08x PSR: %08x\n", command_stat, psr);
|
|
old_command_stat = command_stat;
|
|
old_psr = psr;
|
|
}
|
|
/* gt6426x_eth0_poll(); */
|
|
} while (command_stat & 0x80000000);
|
|
|
|
printf("sent %d byte frame\n", s);
|
|
|
|
if((command_stat & (3<<15)) == 3) {
|
|
printf("frame had error (stat=%08x)\n", command_stat);
|
|
}
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
/**************************************************************************
|
|
DISABLE - Turn off ethernet interface
|
|
***************************************************************************/
|
|
void
|
|
gt6426x_eth_disable(void *v)
|
|
{
|
|
struct eth_device *wp = (struct eth_device *)v;
|
|
struct eth_dev_s *p = (struct eth_dev_s *)wp->priv;
|
|
|
|
GT_REG_WRITE(ETHERNET0_SDMA_COMMAND_REGISTER + p->reg_base, 0x80008000);
|
|
}
|
|
|
|
/**************************************************************************
|
|
MII utilities - write: write to an MII register via SMI
|
|
***************************************************************************/
|
|
int
|
|
gt6426x_miiphy_write(char *devname, unsigned char phy,
|
|
unsigned char reg, unsigned short data)
|
|
{
|
|
unsigned int temp= (reg<<21) | (phy<<16) | data;
|
|
|
|
while(GTREGREAD(ETHERNET_SMI_REGISTER) & (1<<28)); /* wait for !Busy */
|
|
|
|
GT_REG_WRITE(ETHERNET_SMI_REGISTER, temp);
|
|
return 0;
|
|
}
|
|
|
|
/**************************************************************************
|
|
MII utilities - read: read from an MII register via SMI
|
|
***************************************************************************/
|
|
int
|
|
gt6426x_miiphy_read(char *devname, unsigned char phy,
|
|
unsigned char reg, unsigned short *val)
|
|
{
|
|
unsigned int temp= (reg<<21) | (phy<<16) | 1<<26;
|
|
|
|
while(GTREGREAD(ETHERNET_SMI_REGISTER) & (1<<28)); /* wait for !Busy */
|
|
|
|
GT_REG_WRITE(ETHERNET_SMI_REGISTER, temp);
|
|
|
|
while(1) {
|
|
temp=GTREGREAD(ETHERNET_SMI_REGISTER);
|
|
if(temp & (1<<27)) break; /* wait for ReadValid */
|
|
}
|
|
*val = temp & 0xffff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
/**************************************************************************
|
|
MII utilities - dump mii registers
|
|
***************************************************************************/
|
|
static void
|
|
gt6426x_dump_mii(bd_t *bis, unsigned short phy)
|
|
{
|
|
printf("mii reg 0 - 3: %04x %04x %04x %04x\n",
|
|
miiphy_read_ret(phy, 0x0),
|
|
miiphy_read_ret(phy, 0x1),
|
|
miiphy_read_ret(phy, 0x2),
|
|
miiphy_read_ret(phy, 0x3)
|
|
);
|
|
printf(" 4 - 7: %04x %04x %04x %04x\n",
|
|
miiphy_read_ret(phy, 0x4),
|
|
miiphy_read_ret(phy, 0x5),
|
|
miiphy_read_ret(phy, 0x6),
|
|
miiphy_read_ret(phy, 0x7)
|
|
);
|
|
printf(" 8: %04x\n",
|
|
miiphy_read_ret(phy, 0x8)
|
|
);
|
|
printf(" 16-19: %04x %04x %04x %04x\n",
|
|
miiphy_read_ret(phy, 0x10),
|
|
miiphy_read_ret(phy, 0x11),
|
|
miiphy_read_ret(phy, 0x12),
|
|
miiphy_read_ret(phy, 0x13)
|
|
);
|
|
printf(" 20,30: %04x %04x\n",
|
|
miiphy_read_ret(phy, 20),
|
|
miiphy_read_ret(phy, 30)
|
|
);
|
|
}
|
|
#endif
|
|
|
|
#ifdef RESTART_AUTONEG
|
|
|
|
/* If link is up && autoneg compleate, and if
|
|
* GT and PHY disagree about link capabilitys,
|
|
* restart autoneg - something screwy with FD/HD
|
|
* unless we do this. */
|
|
static void
|
|
check_phy_state(struct eth_dev_s *p)
|
|
{
|
|
int bmsr = miiphy_read_ret(ether_port_phy_addr[p->dev], PHY_BMSR);
|
|
int psr = GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + p->reg_base);
|
|
|
|
if ((psr & 1<<3) && (bmsr & PHY_BMSR_LS)) {
|
|
int nego = miiphy_read_ret(ether_port_phy_addr[p->dev], PHY_ANAR) &
|
|
miiphy_read_ret(ether_port_phy_addr[p->dev], PHY_ANLPAR);
|
|
int want;
|
|
|
|
if (nego & PHY_ANLPAR_TXFD) {
|
|
want = 0x3;
|
|
printf("MII: 100Base-TX, Full Duplex\n");
|
|
} else if (nego & PHY_ANLPAR_TX) {
|
|
want = 0x1;
|
|
printf("MII: 100Base-TX, Half Duplex\n");
|
|
} else if (nego & PHY_ANLPAR_10FD) {
|
|
want = 0x2;
|
|
printf("MII: 10Base-T, Full Duplex\n");
|
|
} else if (nego & PHY_ANLPAR_10) {
|
|
want = 0x0;
|
|
printf("MII: 10Base-T, Half Duplex\n");
|
|
} else {
|
|
printf("MII: Unknown link-foo! %x\n", nego);
|
|
return;
|
|
}
|
|
|
|
if ((psr & 0x3) != want) {
|
|
printf("MII: GT thinks %x, PHY thinks %x, restarting autoneg..\n",
|
|
psr & 0x3, want);
|
|
miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev],0,
|
|
miiphy_read_ret(ether_port_phy_addr[p->dev],0) | (1<<9));
|
|
udelay(10000); /* the EVB's GT takes a while to notice phy
|
|
went down and up */
|
|
}
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/**************************************************************************
|
|
PROBE - Look for an adapter, this routine's visible to the outside
|
|
***************************************************************************/
|
|
int
|
|
gt6426x_eth_probe(void *v, bd_t *bis)
|
|
{
|
|
struct eth_device *wp = (struct eth_device *)v;
|
|
struct eth_dev_s *p = (struct eth_dev_s *)wp->priv;
|
|
int dev = p->dev;
|
|
unsigned int reg_base = p->reg_base;
|
|
unsigned long temp;
|
|
int i;
|
|
|
|
if (( dev < 0 ) || ( dev >= GAL_ETH_DEVS ))
|
|
{ /* This should never happen */
|
|
printf("%s: Invalid device %d\n", __FUNCTION__, dev );
|
|
return 0;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
printf ("%s: initializing %s\n", __FUNCTION__, wp->name );
|
|
printf ("\nCOMM_CONTROL = %08x , COMM_CONF = %08x\n",
|
|
GTREGREAD(COMM_UNIT_ARBITER_CONTROL),
|
|
GTREGREAD(COMM_UNIT_ARBITER_CONFIGURATION_REGISTER));
|
|
#endif
|
|
|
|
/* clear MIB counters */
|
|
for(i=0;i<255; i++)
|
|
temp=GTREGREAD(ETHERNET0_MIB_COUNTER_BASE + reg_base +i);
|
|
|
|
#ifdef CONFIG_INTEL_LXT97X
|
|
/* for intel LXT972 */
|
|
|
|
/* led 1: 0x1=txact
|
|
led 2: 0xc=link/rxact
|
|
led 3: 0x2=rxact (N/C)
|
|
strch: 0,2=30 ms, enable */
|
|
miiphy_write(GT6426x_MII_DEVNAME,ether_port_phy_addr[p->dev], 20, 0x1c22);
|
|
|
|
/* 2.7ns port rise time */
|
|
/*miiphy_write(ether_port_phy_addr[p->dev], 30, 0x0<<10); */
|
|
#else
|
|
/* already set up in mpsc.c */
|
|
/*GT_REG_WRITE(MAIN_ROUTING_REGISTER, 0x7ffe38); / b400 */
|
|
|
|
/* already set up in sdram_init.S... */
|
|
/* MPSC0, MPSC1, RMII */
|
|
/*GT_REG_WRITE(SERIAL_PORT_MULTIPLEX, 0x1102); / f010 */
|
|
#endif
|
|
GT_REG_WRITE(ETHERNET_PHY_ADDRESS_REGISTER,
|
|
ether_port_phy_addr[0] |
|
|
(ether_port_phy_addr[1]<<5) |
|
|
(ether_port_phy_addr[2]<<10)); /* 2000 */
|
|
|
|
/* 13:12 - 10: 4x64bit burst (cache line size = 32 bytes)
|
|
* 9 - 1: RIFB - interrupt on frame boundaries only
|
|
* 6:7 - 00: big endian rx and tx
|
|
* 5:2 - 1111: 15 retries */
|
|
GT_REG_WRITE(ETHERNET0_SDMA_CONFIGURATION_REGISTER + reg_base,
|
|
(2<<12) | (1<<9) | (0xf<<2) ); /* 2440 */
|
|
|
|
#ifndef USE_SOFTWARE_CACHE_MANAGEMENT
|
|
/* enable rx/tx desc/buffer cache snoop */
|
|
GT_REG_READ(ETHERNET_0_ADDRESS_CONTROL_LOW + dev*0x20,
|
|
&temp); /* f200 */
|
|
temp|= (1<<6)| (1<<14)| (1<<22)| (1<<30);
|
|
GT_REG_WRITE(ETHERNET_0_ADDRESS_CONTROL_LOW + dev*0x20,
|
|
temp);
|
|
#endif
|
|
|
|
/* 31 28 27 24 23 20 19 16
|
|
* 0000 0000 0000 0000 [0004]
|
|
* 15 12 11 8 7 4 3 0
|
|
* 1000 1101 0000 0000 [4d00]
|
|
* 20 - 0=MII 1=RMII
|
|
* 19 - 0=speed autoneg
|
|
* 15:14 - framesize 1536 (GT6426x_ETH_BUF_SIZE)
|
|
* 11 - no force link pass
|
|
* 10 - 1=disable fctl autoneg
|
|
* 8 - override prio ?? */
|
|
temp = 0x00004d00;
|
|
#ifndef CONFIG_ETHER_PORT_MII
|
|
temp |= (1<<20); /* RMII */
|
|
#endif
|
|
/* set En */
|
|
GT_REG_WRITE(ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER + reg_base,
|
|
temp); /* 2408 */
|
|
|
|
/* hardcode E1 also? */
|
|
/* -- according to dox, this is safer due to extra pulldowns? */
|
|
if (dev<2) {
|
|
GT_REG_WRITE(ETHERNET0_PORT_CONFIGURATION_EXTEND_REGISTER + (dev+1) * 0x400,
|
|
temp); /* 2408 */
|
|
}
|
|
|
|
/* wake up MAC */ /* 2400 */
|
|
GT_REG_READ(ETHERNET0_PORT_CONFIGURATION_REGISTER + reg_base, &temp);
|
|
temp |= (1<<7); /* enable port */
|
|
#ifdef CONFIG_GT_USE_MAC_HASH_TABLE
|
|
temp |= (1<<12); /* hash size 1/2k */
|
|
#else
|
|
temp |= 1; /* promisc */
|
|
#endif
|
|
GT_REG_WRITE(ETHERNET0_PORT_CONFIGURATION_REGISTER + reg_base, temp);
|
|
/* 2400 */
|
|
|
|
#ifdef RESTART_AUTONEG
|
|
check_phy_state(p);
|
|
#endif
|
|
|
|
printf("%s: Waiting for link up..\n", wp->name);
|
|
temp = 10 * 1000;
|
|
/* wait for link back up */
|
|
while(!(GTREGREAD(ETHERNET0_PORT_STATUS_REGISTER + reg_base) & 8)
|
|
&& (--temp > 0)){
|
|
udelay(1000); /* wait 1 ms */
|
|
}
|
|
if ( temp == 0) {
|
|
printf("%s: Failed!\n", wp->name);
|
|
return (0);
|
|
}
|
|
|
|
printf("%s: OK!\n", wp->name);
|
|
|
|
p->tdn = 0;
|
|
p->rdn = 0;
|
|
p->eth_tx_desc[p->tdn].command_status = 0;
|
|
|
|
/* Initialize Rx Side */
|
|
for (temp = 0; temp < NR; temp++) {
|
|
p->eth_rx_desc[temp].buff_pointer = (uchar *)p->eth_rx_buffer[temp];
|
|
p->eth_rx_desc[temp].buff_size_byte_count = GT6426x_ETH_BUF_SIZE<<16;
|
|
|
|
/* GT96100 Owner */
|
|
p->eth_rx_desc[temp].command_status = 0x80000000;
|
|
p->eth_rx_desc[temp].next_desc =
|
|
(struct eth0_rx_desc_struct *)
|
|
&p->eth_rx_desc[(temp+1)%NR].buff_size_byte_count;
|
|
}
|
|
|
|
FLUSH_DCACHE((unsigned int)&p->eth_tx_desc[0],
|
|
(unsigned int)&p->eth_tx_desc[NR]);
|
|
FLUSH_DCACHE((unsigned int)&p->eth_rx_desc[0],
|
|
(unsigned int)&p->eth_rx_desc[NR]);
|
|
|
|
GT_REG_WRITE(ETHERNET0_CURRENT_TX_DESCRIPTOR_POINTER0 + reg_base,
|
|
(unsigned int) p->eth_tx_desc);
|
|
GT_REG_WRITE(ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 + reg_base,
|
|
(unsigned int) p->eth_rx_desc);
|
|
GT_REG_WRITE(ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 + reg_base,
|
|
(unsigned int) p->eth_rx_desc);
|
|
|
|
#ifdef DEBUG
|
|
printf ("\nRx descriptor pointer is %08x %08x\n",
|
|
GTREGREAD(ETHERNET0_FIRST_RX_DESCRIPTOR_POINTER0 + reg_base),
|
|
GTREGREAD(ETHERNET0_CURRENT_RX_DESCRIPTOR_POINTER0 + reg_base));
|
|
printf ("\n\n%08x %08x\n",
|
|
(unsigned int)p->eth_rx_desc,p->eth_rx_desc[0].command_status);
|
|
|
|
printf ("Descriptor dump:\n");
|
|
printf ("cmd status: %08x\n",p->eth_rx_desc[0].command_status);
|
|
printf ("byte_count: %08x\n",p->eth_rx_desc[0].buff_size_byte_count);
|
|
printf ("buff_ptr: %08x\n",(unsigned int)p->eth_rx_desc[0].buff_pointer);
|
|
printf ("next_desc: %08x\n\n",(unsigned int)p->eth_rx_desc[0].next_desc);
|
|
printf ("%08x\n",*(unsigned int *) ((unsigned int)p->eth_rx_desc + 0x0));
|
|
printf ("%08x\n",*(unsigned int *) ((unsigned int)p->eth_rx_desc + 0x4));
|
|
printf ("%08x\n",*(unsigned int *) ((unsigned int)p->eth_rx_desc + 0x8));
|
|
printf ("%08x\n\n",
|
|
*(unsigned int *) ((unsigned int)p->eth_rx_desc + 0xc));
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
gt6426x_dump_mii(bis,ether_port_phy_addr[p->dev]);
|
|
#endif
|
|
|
|
#ifdef CONFIG_GT_USE_MAC_HASH_TABLE
|
|
{
|
|
unsigned int hashtable_base;
|
|
u8 *b = (u8 *)(wp->enetaddr);
|
|
u32 macH, macL;
|
|
|
|
/* twist the MAC up into the way the discovery wants it */
|
|
macH= (b[0]<<8) | b[1];
|
|
macL= (b[2]<<24) | (b[3]<<16) | (b[4]<<8) | b[5];
|
|
|
|
/* mode 0, size 0x800 */
|
|
hashtable_base =initAddressTable(dev,0,1);
|
|
|
|
if(!hashtable_base) {
|
|
printf("initAddressTable failed\n");
|
|
return 0;
|
|
}
|
|
|
|
addAddressTableEntry(dev, macH, macL, 1, 0);
|
|
GT_REG_WRITE(ETHERNET0_HASH_TABLE_POINTER_REGISTER + reg_base,
|
|
hashtable_base);
|
|
}
|
|
#endif
|
|
|
|
/* Start Rx*/
|
|
GT_REG_WRITE(ETHERNET0_SDMA_COMMAND_REGISTER + reg_base, 0x00000080);
|
|
printf("%s: gt6426x eth device %d init success \n", wp->name, dev );
|
|
return 1;
|
|
}
|
|
|
|
/* enter all the galileo ethernet devs into MULTI-BOOT */
|
|
void
|
|
gt6426x_eth_initialize(bd_t *bis)
|
|
{
|
|
struct eth_device *dev;
|
|
struct eth_dev_s *p;
|
|
int devnum, x, temp;
|
|
char *s, *e, buf[64];
|
|
|
|
#ifdef DEBUG
|
|
printf( "\n%s\n", __FUNCTION );
|
|
#endif
|
|
|
|
for (devnum = 0; devnum < GAL_ETH_DEVS; devnum++) {
|
|
dev = calloc(sizeof(*dev), 1);
|
|
if (!dev) {
|
|
printf( "%s: gal_enet%d allocation failure, %s\n",
|
|
__FUNCTION__, devnum, "eth_device structure");
|
|
return;
|
|
}
|
|
|
|
/* must be less than NAMESIZE (16) */
|
|
sprintf(dev->name, "gal_enet%d", devnum);
|
|
|
|
#ifdef DEBUG
|
|
printf( "Initializing %s\n", dev->name );
|
|
#endif
|
|
|
|
/* Extract the MAC address from the environment */
|
|
switch (devnum)
|
|
{
|
|
case 0: s = "ethaddr"; break;
|
|
#if (GAL_ETH_DEVS > 1)
|
|
case 1: s = "eth1addr"; break;
|
|
#endif
|
|
#if (GAL_ETH_DEVS > 2)
|
|
case 2: s = "eth2addr"; break;
|
|
#endif
|
|
default: /* this should never happen */
|
|
printf( "%s: Invalid device number %d\n",
|
|
__FUNCTION__, devnum );
|
|
return;
|
|
}
|
|
|
|
temp = getenv_r (s, buf, sizeof(buf));
|
|
s = (temp > 0) ? buf : NULL;
|
|
|
|
#ifdef DEBUG
|
|
printf ("Setting MAC %d to %s\n", devnum, s );
|
|
#endif
|
|
for (x = 0; x < 6; ++x) {
|
|
dev->enetaddr[x] = s ? simple_strtoul(s, &e, 16) : 0;
|
|
if (s)
|
|
s = (*e) ? e+1 : e;
|
|
}
|
|
|
|
dev->init = (void*)gt6426x_eth_probe;
|
|
dev->halt = (void*)gt6426x_eth_reset;
|
|
dev->send = (void*)gt6426x_eth_transmit;
|
|
dev->recv = (void*)gt6426x_eth_poll;
|
|
|
|
p = calloc( sizeof(*p), 1 );
|
|
dev->priv = (void*)p;
|
|
if (!p)
|
|
{
|
|
printf( "%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name, "Private Device Structure");
|
|
free(dev);
|
|
return;
|
|
}
|
|
|
|
p->dev = devnum;
|
|
p->tdn=0;
|
|
p->rdn=0;
|
|
p->reg_base = devnum * ETHERNET_PORTS_DIFFERENCE_OFFSETS;
|
|
|
|
p->eth_tx_desc =
|
|
(eth0_tx_desc_single *)
|
|
(((unsigned int) malloc(sizeof (eth0_tx_desc_single) *
|
|
(NT+1)) & 0xfffffff0) + 0x10);
|
|
if (!p)
|
|
{
|
|
printf( "%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name, "Tx Descriptor");
|
|
free(dev);
|
|
return;
|
|
}
|
|
|
|
p->eth_rx_desc =
|
|
(eth0_rx_desc_single *)
|
|
(((unsigned int) malloc(sizeof (eth0_rx_desc_single) *
|
|
(NR+1)) & 0xfffffff0) + 0x10);
|
|
if (!p->eth_rx_desc)
|
|
{
|
|
printf( "%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name, "Rx Descriptor");
|
|
free(dev);
|
|
free(p);
|
|
return;
|
|
}
|
|
|
|
p->eth_tx_buffer =
|
|
(char *) (((unsigned int) malloc(GT6426x_ETH_BUF_SIZE) & 0xfffffff0) + 0x10);
|
|
if (!p->eth_tx_buffer)
|
|
{
|
|
printf( "%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name, "Tx Bufffer");
|
|
free(dev);
|
|
free(p);
|
|
free(p->eth_rx_desc);
|
|
return;
|
|
}
|
|
|
|
for (temp = 0 ; temp < NR ; temp ++) {
|
|
p->eth_rx_buffer[temp] =
|
|
(char *)
|
|
(((unsigned int) malloc(GT6426x_ETH_BUF_SIZE) & 0xfffffff0) + 0x10);
|
|
if (!p->eth_rx_buffer[temp])
|
|
{
|
|
printf( "%s: %s allocation failure, %s\n",
|
|
__FUNCTION__, dev->name, "Rx Buffers");
|
|
free(dev);
|
|
free(p);
|
|
free(p->eth_tx_buffer);
|
|
free(p->eth_rx_desc);
|
|
free(p->eth_tx_desc);
|
|
while (temp >= 0)
|
|
free(p->eth_rx_buffer[--temp]);
|
|
return;
|
|
}
|
|
}
|
|
|
|
|
|
eth_register(dev);
|
|
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
|
|
miiphy_register(dev->name,
|
|
gt6426x_miiphy_read, gt6426x_miiphy_write);
|
|
#endif
|
|
}
|
|
|
|
}
|
|
#endif /* CFG_CMD_NET && CONFIG_NET_MULTI */
|
|
|