upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/asm-arm/arch-kirkwood/gpio.h

51 lines
1.7 KiB

/*
* arch/asm-arm/mach-kirkwood/include/mach/gpio.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/*
* Based on (mostly copied from) plat-orion based Linux 2.6 kernel driver.
* Removed kernel level irq handling. Took some macros from kernel to
* allow build.
*
* Dieter Kiermaier dk-arm-linux@gmx.de
*/
#ifndef __KIRKWOOD_GPIO_H
#define __KIRKWOOD_GPIO_H
/* got from kernel include/linux/bitops.h */
#define BITS_PER_BYTE 8
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
#define GPIO_MAX 50
#define GPIO_OFF(pin) (((pin) >> 5) ? 0x0040 : 0x0000)
#define GPIO_OUT(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x00)
#define GPIO_IO_CONF(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x04)
#define GPIO_BLINK_EN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x08)
#define GPIO_IN_POL(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x0c)
#define GPIO_DATA_IN(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x10)
#define GPIO_EDGE_CAUSE(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x14)
#define GPIO_EDGE_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x18)
#define GPIO_LEVEL_MASK(pin) (KW_GPIO0_BASE + GPIO_OFF(pin) + 0x1c)
/*
* Kirkwood-specific GPIO API
*/
void kw_gpio_set_valid(unsigned pin, int mode);
int kw_gpio_is_valid(unsigned pin, int mode);
int kw_gpio_direction_input(unsigned pin);
int kw_gpio_direction_output(unsigned pin, int value);
int kw_gpio_get_value(unsigned pin);
void kw_gpio_set_value(unsigned pin, int value);
void kw_gpio_set_blink(unsigned pin, int blink);
void kw_gpio_set_unused(unsigned pin);
#define GPIO_INPUT_OK (1 << 0)
#define GPIO_OUTPUT_OK (1 << 1)
#endif