upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
451 lines
9.3 KiB
451 lines
9.3 KiB
/*
|
|
* (C) Copyright 2000-2003
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
|
|
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <asm/immap.h>
|
|
|
|
#ifndef CONFIG_SYS_FLASH_CFI
|
|
typedef unsigned short FLASH_PORT_WIDTH;
|
|
typedef volatile unsigned short FLASH_PORT_WIDTHV;
|
|
|
|
#define FPW FLASH_PORT_WIDTH
|
|
#define FPWV FLASH_PORT_WIDTHV
|
|
|
|
#define FLASH_CYCLE1 0x5555
|
|
#define FLASH_CYCLE2 0x2aaa
|
|
|
|
#define SYNC __asm__("nop")
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
|
|
ulong flash_get_size(FPWV * addr, flash_info_t * info);
|
|
int flash_get_offsets(ulong base, flash_info_t * info);
|
|
int write_word(flash_info_t * info, FPWV * dest, u16 data);
|
|
void inline spin_wheel(void);
|
|
|
|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
|
|
|
|
ulong flash_init(void)
|
|
{
|
|
ulong size = 0;
|
|
ulong fbase = 0;
|
|
|
|
fbase = (ulong) CONFIG_SYS_FLASH_BASE;
|
|
flash_get_size((FPWV *) fbase, &flash_info[0]);
|
|
flash_get_offsets((ulong) fbase, &flash_info[0]);
|
|
fbase += flash_info[0].size;
|
|
size += flash_info[0].size;
|
|
|
|
/* Protect monitor and environment sectors */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CONFIG_SYS_MONITOR_BASE,
|
|
CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
|
|
|
|
return size;
|
|
}
|
|
|
|
int flash_get_offsets(ulong base, flash_info_t * info)
|
|
{
|
|
int j, k;
|
|
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
|
|
|
|
info->start[0] = base;
|
|
for (k = 0, j = 0; j < CONFIG_SYS_SST_SECT; j++, k++) {
|
|
info->start[k + 1] = info->start[k] + CONFIG_SYS_SST_SECTSZ;
|
|
info->protect[k] = 0;
|
|
}
|
|
}
|
|
|
|
return ERR_OK;
|
|
}
|
|
|
|
void flash_print_info(flash_info_t * info)
|
|
{
|
|
int i;
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_SST:
|
|
printf("SST ");
|
|
break;
|
|
default:
|
|
printf("Unknown Vendor ");
|
|
break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_SST6401B:
|
|
printf("SST39VF6401B\n");
|
|
break;
|
|
default:
|
|
printf("Unknown Chip Type\n");
|
|
return;
|
|
}
|
|
|
|
if (info->size > 0x100000) {
|
|
int remainder;
|
|
|
|
printf(" Size: %ld", info->size >> 20);
|
|
|
|
remainder = (info->size % 0x100000);
|
|
if (remainder) {
|
|
remainder >>= 10;
|
|
remainder = (int)((float)
|
|
(((float)remainder / (float)1024) *
|
|
10000));
|
|
printf(".%d ", remainder);
|
|
}
|
|
|
|
printf("MB in %d Sectors\n", info->sector_count);
|
|
} else
|
|
printf(" Size: %ld KB in %d Sectors\n",
|
|
info->size >> 10, info->sector_count);
|
|
|
|
printf(" Sector Start Addresses:");
|
|
for (i = 0; i < info->sector_count; ++i) {
|
|
if ((i % 5) == 0)
|
|
printf("\n ");
|
|
printf(" %08lX%s",
|
|
info->start[i], info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf("\n");
|
|
}
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
ulong flash_get_size(FPWV * addr, flash_info_t * info)
|
|
{
|
|
u16 value;
|
|
|
|
addr[FLASH_CYCLE1] = (FPWV) 0x00AA00AA; /* for Atmel, Intel ignores this */
|
|
addr[FLASH_CYCLE2] = (FPWV) 0x00550055; /* for Atmel, Intel ignores this */
|
|
addr[FLASH_CYCLE1] = (FPWV) 0x00900090; /* selects Intel or Atmel */
|
|
|
|
switch (addr[0] & 0xffff) {
|
|
case (u8) SST_MANUFACT:
|
|
info->flash_id = FLASH_MAN_SST;
|
|
value = addr[1];
|
|
break;
|
|
default:
|
|
printf("Unknown Flash\n");
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
|
|
*addr = (FPW) 0x00F000F0;
|
|
return (0); /* no or unknown flash */
|
|
}
|
|
|
|
switch (value) {
|
|
case (u16) SST_ID_xF6401B:
|
|
info->flash_id += FLASH_SST6401B;
|
|
break;
|
|
default:
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
info->sector_count = CONFIG_SYS_SST_SECT;
|
|
info->size = CONFIG_SYS_SST_SECT * CONFIG_SYS_SST_SECTSZ;
|
|
|
|
/* reset ID mode */
|
|
*addr = (FPWV) 0x00F000F0;
|
|
|
|
if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
|
|
printf("** ERROR: sector count %d > max (%d) **\n",
|
|
info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
|
|
info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
|
}
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
int flash_erase(flash_info_t * info, int s_first, int s_last)
|
|
{
|
|
FPWV *addr;
|
|
int flag, prot, sect, count;
|
|
ulong type, start, last;
|
|
int rcode = 0, flashtype = 0;
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
printf("- missing\n");
|
|
else
|
|
printf("- no sectors to erase\n");
|
|
return 1;
|
|
}
|
|
|
|
type = (info->flash_id & FLASH_VENDMASK);
|
|
|
|
switch (type) {
|
|
case FLASH_MAN_SST:
|
|
flashtype = 1;
|
|
break;
|
|
default:
|
|
type = (info->flash_id & FLASH_VENDMASK);
|
|
printf("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect = s_first; sect <= s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot)
|
|
printf("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
else
|
|
printf("\n");
|
|
|
|
flag = disable_interrupts();
|
|
|
|
start = get_timer(0);
|
|
last = start;
|
|
|
|
if ((s_last - s_first) == (CONFIG_SYS_SST_SECT - 1)) {
|
|
if (prot == 0) {
|
|
addr = (FPWV *) info->start[0];
|
|
|
|
addr[FLASH_CYCLE1] = 0x00AA; /* unlock */
|
|
addr[FLASH_CYCLE2] = 0x0055; /* unlock */
|
|
addr[FLASH_CYCLE1] = 0x0080; /* erase mode */
|
|
addr[FLASH_CYCLE1] = 0x00AA; /* unlock */
|
|
addr[FLASH_CYCLE2] = 0x0055; /* unlock */
|
|
*addr = 0x0030; /* erase chip */
|
|
|
|
count = 0;
|
|
start = get_timer(0);
|
|
|
|
while ((*addr & 0x0080) != 0x0080) {
|
|
if (count++ > 0x10000) {
|
|
spin_wheel();
|
|
count = 0;
|
|
}
|
|
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf("Timeout\n");
|
|
*addr = 0x00F0; /* reset to read mode */
|
|
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
*addr = 0x00F0; /* reset to read mode */
|
|
|
|
printf("\b. done\n");
|
|
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
return 0;
|
|
} else if (prot == CONFIG_SYS_SST_SECT) {
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
/* Start erase on unprotected sectors */
|
|
for (sect = s_first; sect <= s_last; sect++) {
|
|
if (info->protect[sect] == 0) { /* not protected */
|
|
|
|
addr = (FPWV *) (info->start[sect]);
|
|
|
|
printf(".");
|
|
|
|
/* arm simple, non interrupt dependent timer */
|
|
start = get_timer(0);
|
|
|
|
switch (flashtype) {
|
|
case 1:
|
|
{
|
|
FPWV *base; /* first address in bank */
|
|
|
|
flag = disable_interrupts();
|
|
|
|
base = (FPWV *) (CONFIG_SYS_FLASH_BASE); /* First sector */
|
|
|
|
base[FLASH_CYCLE1] = 0x00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = 0x0055; /* unlock */
|
|
base[FLASH_CYCLE1] = 0x0080; /* erase mode */
|
|
base[FLASH_CYCLE1] = 0x00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = 0x0055; /* unlock */
|
|
*addr = 0x0050; /* erase sector */
|
|
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
while ((*addr & 0x0080) != 0x0080) {
|
|
if (get_timer(start) >
|
|
CONFIG_SYS_FLASH_ERASE_TOUT) {
|
|
printf("Timeout\n");
|
|
*addr = 0x00F0; /* reset to read mode */
|
|
|
|
rcode = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
*addr = 0x00F0; /* reset to read mode */
|
|
break;
|
|
}
|
|
} /* switch (flashtype) */
|
|
}
|
|
}
|
|
printf(" done\n");
|
|
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
return rcode;
|
|
}
|
|
|
|
int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
|
|
{
|
|
ulong wp, count;
|
|
u16 data;
|
|
int rc, port_width;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN)
|
|
return 4;
|
|
|
|
/* get lower word aligned address */
|
|
wp = addr;
|
|
port_width = sizeof(FPW);
|
|
|
|
/* handle unaligned start bytes */
|
|
if (wp & 1) {
|
|
data = *((FPWV *) wp);
|
|
data = (data << 8) | *src;
|
|
|
|
if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
|
|
return (rc);
|
|
|
|
wp++;
|
|
cnt -= 1;
|
|
src++;
|
|
}
|
|
|
|
while (cnt >= 2) {
|
|
/*
|
|
* handle word aligned part
|
|
*/
|
|
count = 0;
|
|
data = *((FPWV *) src);
|
|
|
|
if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
|
|
return (rc);
|
|
|
|
wp += 2;
|
|
src += 2;
|
|
cnt -= 2;
|
|
|
|
if (count++ > 0x800) {
|
|
spin_wheel();
|
|
count = 0;
|
|
}
|
|
}
|
|
/* handle word aligned part */
|
|
if (cnt) {
|
|
/* handle word aligned part */
|
|
count = 0;
|
|
data = *((FPWV *) wp);
|
|
|
|
data = (data & 0x00FF) | (*src << 8);
|
|
|
|
if ((rc = write_word(info, (FPWV *) wp, data)) != 0)
|
|
return (rc);
|
|
|
|
wp++;
|
|
src++;
|
|
cnt -= 1;
|
|
if (count++ > 0x800) {
|
|
spin_wheel();
|
|
count = 0;
|
|
}
|
|
}
|
|
|
|
if (cnt == 0)
|
|
return ERR_OK;
|
|
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash
|
|
* A word is 16 bits, whichever the bus width of the flash bank
|
|
* (not an individual chip) is.
|
|
*
|
|
* returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
int write_word(flash_info_t * info, FPWV * dest, u16 data)
|
|
{
|
|
ulong start;
|
|
int flag;
|
|
int res = 0; /* result, assume success */
|
|
FPWV *base; /* first address in flash bank */
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*dest & (u8) data) != (u8) data) {
|
|
return (2);
|
|
}
|
|
|
|
base = (FPWV *) (CONFIG_SYS_FLASH_BASE);
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
base[FLASH_CYCLE1] = (u8) 0x00AA00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = (u8) 0x00550055; /* unlock */
|
|
base[FLASH_CYCLE1] = (u8) 0x00A000A0; /* selects program mode */
|
|
|
|
*dest = data; /* start programming the data */
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
start = get_timer(0);
|
|
|
|
/* data polling for D7 */
|
|
while (res == 0
|
|
&& (*dest & (u8) 0x00800080) != (data & (u8) 0x00800080)) {
|
|
if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
|
|
*dest = (u8) 0x00F000F0; /* reset bank */
|
|
res = 1;
|
|
}
|
|
}
|
|
|
|
*dest++ = (u8) 0x00F000F0; /* reset bank */
|
|
|
|
return (res);
|
|
}
|
|
|
|
void inline spin_wheel(void)
|
|
{
|
|
static int p = 0;
|
|
static char w[] = "\\/-";
|
|
|
|
printf("\010%c", w[p]);
|
|
(++p == 3) ? (p = 0) : 0;
|
|
}
|
|
|
|
#endif
|
|
|