upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/MAI/AmigaOneG3SE/i8259.c

230 lines
5.3 KiB

/*
* (C) Copyright 2002
* John W. Linville, linville@tuxdriver.com
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include "i8259.h"
#undef IRQ_DEBUG
#ifdef IRQ_DEBUG
#define PRINTF(fmt,args...) printf (fmt ,##args)
#else
#define PRINTF(fmt,args...)
#endif
static inline unsigned char read_byte(volatile unsigned char* from)
{
int x;
asm volatile ("lbz %0,%1\n eieio" : "=r" (x) : "m" (*from));
return (unsigned char)x;
}
static inline void write_byte(volatile unsigned char *to, int x)
{
asm volatile ("stb %1,%0\n eieio" : "=m" (*to) : "r" (x));
}
static inline unsigned long read_long_little(volatile unsigned long *from)
{
unsigned long x;
asm volatile ("lwbrx %0,0,%1\n eieio\n sync" : "=r" (x) : "r" (from), "m"(*from));
return (unsigned long)x;
}
#ifdef out8
#undef out8
#endif
#ifdef in8
#undef in8
#endif
#define out8(addr, byte) write_byte(0xFE000000 | addr, byte)
#define in8(addr) read_byte(0xFE000000 | addr)
/*
* This contains the irq mask for both 8259A irq controllers,
*/
static char cached_imr[2] = {0xff, 0xff};
#define cached_imr1 (cached_imr[0])
#define cached_imr2 (cached_imr[1])
void i8259_init(void)
{
char dummy;
PRINTF("Initializing Interrupt controller\n");
/* init master interrupt controller */
out8(0x20, 0x11); //0x19); // was: 0x11); /* Start init sequence */
out8(0x21, 0x00); /* Vector base */
out8(0x21, 0x04); /* edge tiggered, Cascade (slave) on IRQ2 */
out8(0x21, 0x11); // was: 0x01); /* Select 8086 mode */
/* init slave interrupt controller */
out8(0xA0, 0x11); //0x19); // was: 0x11); /* Start init sequence */
out8(0xA1, 0x08); /* Vector base */
out8(0xA1, 0x02); /* edge triggered, Cascade (slave) on IRQ2 */
out8(0xA1, 0x11); // was: 0x01); /* Select 8086 mode */
/* always read ISR */
out8(0x20, 0x0B);
dummy = in8(ISR_1);
out8(0xA0, 0x0B);
dummy = in8(ISR_2);
/* out8(0x43, 0x30); */
/* out8(0x40, 0); */
/* out8(0x40, 0); */
/* out8(0x43, 0x70); */
/* out8(0x41, 0); */
/* out8(0x41, 0); */
/* out8(0x43, 0xb0); */
/* out8(0x42, 0); */
/* out8(0x42, 0); */
/* Mask all interrupts */
out8(IMR_2, cached_imr2);
out8(IMR_1, cached_imr1);
i8259_unmask_irq(2);
#if 0
{
int i;
for (i=0; i<16; i++)
{
i8259_unmask_irq(i);
}
}
#endif
}
static volatile char *pci_intack = (void *)0xFEF00000;
int i8259_irq(void)
{
int irq;
irq = read_long_little(pci_intack) & 0xff;
if (irq==7) {
/*
* This may be a spurious interrupt.
*
* Read the interrupt status register (ISR). If the most
* significant bit is not set then there is no valid
* interrupt.
*/
if(~in8(0x20)&0x80) {
irq = -1;
}
}
return irq;
}
int i8259_get_irq(struct pt_regs *regs)
{
unsigned char irq;
/*
* Perform an interrupt acknowledge cycle on controller 1
*/
out8(OCW3_1, 0x0C); /* prepare for poll */
irq = in8(IPL_1) & 7;
if (irq == 2) {
/*
* Interrupt is cascaded so perform interrupt
* acknowledge on controller 2
*/
out8(OCW3_2, 0x0C); /* prepare for poll */
irq = (in8(IPL_2) & 7) + 8;
if (irq == 15) {
/*
* This may be a spurious interrupt
*
* Read the interrupt status register. If the most
* significant bit is not set then there is no valid
* interrupt
*/
out8(OCW3_2, 0x0b);
if (~(in8(ISR_2) & 0x80)) {
return -1;
}
}
} else if (irq == 7) {
/*
* This may be a spurious interrupt
*
* Read the interrupt status register. If the most
* significant bit is not set then there is no valid
* interrupt
*/
out8(OCW3_1, 0x0b);
if (~(in8(ISR_1) & 0x80)) {
return -1;
}
}
return irq;
}
/*
* Careful! The 8259A is a fragile beast, it pretty
* much _has_ to be done exactly like this (mask it
* first, _then_ send the EOI, and the order of EOI
* to the two 8259s is important!
*/
void i8259_mask_and_ack(int irq)
{
if (irq > 7) {
cached_imr2 |= (1 << (irq - 8));
in8(IMR_2); /* DUMMY */
out8(IMR_2, cached_imr2);
out8(OCW2_2, 0x20); /* Non-specific EOI */
out8(OCW2_1, 0x20); /* Non-specific EOI to cascade */
} else {
cached_imr1 |= (1 << irq);
in8(IMR_1); /* DUMMY */
out8(IMR_1, cached_imr1);
out8(OCW2_1, 0x20); /* Non-specific EOI */
}
}
void i8259_mask_irq(int irq)
{
if (irq & 8) {
cached_imr2 |= (1 << (irq & 7));
out8(IMR_2, cached_imr2);
} else {
cached_imr1 |= (1 << irq);
out8(IMR_1, cached_imr1);
}
}
void i8259_unmask_irq(int irq)
{
if (irq & 8) {
cached_imr2 &= ~(1 << (irq & 7));
out8(IMR_2, cached_imr2);
} else {
cached_imr1 &= ~(1 << irq);
out8(IMR_1, cached_imr1);
}
}