upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
262 lines
8.0 KiB
262 lines
8.0 KiB
/*
|
|
* (C) Copyright 2001
|
|
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <command.h>
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#ifdef FPGA_DEBUG
|
|
#define DBG(x...) printf(x)
|
|
#else
|
|
#define DBG(x...)
|
|
#endif /* DEBUG */
|
|
|
|
#define MAX_ONES 226
|
|
|
|
#define IBM405GP_GPIO0_OR 0xef600700 /* GPIO Output */
|
|
#define IBM405GP_GPIO0_TCR 0xef600704 /* GPIO Three-State Control */
|
|
#define IBM405GP_GPIO0_ODR 0xef600718 /* GPIO Open Drain */
|
|
#define IBM405GP_GPIO0_IR 0xef60071c /* GPIO Input */
|
|
|
|
#ifdef CFG_FPGA_PRG
|
|
# define FPGA_PRG CFG_FPGA_PRG /* FPGA program pin (ppc output)*/
|
|
# define FPGA_CLK CFG_FPGA_CLK /* FPGA clk pin (ppc output) */
|
|
# define FPGA_DATA CFG_FPGA_DATA /* FPGA data pin (ppc output) */
|
|
# define FPGA_DONE CFG_FPGA_DONE /* FPGA done pin (ppc input) */
|
|
# define FPGA_INIT CFG_FPGA_INIT /* FPGA init pin (ppc input) */
|
|
#else
|
|
# define FPGA_PRG 0x04000000 /* FPGA program pin (ppc output) */
|
|
# define FPGA_CLK 0x02000000 /* FPGA clk pin (ppc output) */
|
|
# define FPGA_DATA 0x01000000 /* FPGA data pin (ppc output) */
|
|
# define FPGA_DONE 0x00800000 /* FPGA done pin (ppc input) */
|
|
# define FPGA_INIT 0x00400000 /* FPGA init pin (ppc input) */
|
|
#endif
|
|
|
|
#define ERROR_FPGA_PRG_INIT_LOW -1 /* Timeout after PRG* asserted */
|
|
#define ERROR_FPGA_PRG_INIT_HIGH -2 /* Timeout after PRG* deasserted */
|
|
#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */
|
|
|
|
#define SET_FPGA(data) out32(IBM405GP_GPIO0_OR, data)
|
|
|
|
#define FPGA_WRITE_1 { \
|
|
SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
|
|
SET_FPGA(FPGA_PRG | FPGA_DATA); /* set data to 1 */ \
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set clock to 1 */ \
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
|
|
|
|
#define FPGA_WRITE_0 { \
|
|
SET_FPGA(FPGA_PRG | FPGA_DATA); /* set clock to 0 */ \
|
|
SET_FPGA(FPGA_PRG); /* set data to 0 */ \
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK); /* set clock to 1 */ \
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);} /* set data to 1 */
|
|
|
|
|
|
static int fpga_boot(unsigned char *fpgadata, int size)
|
|
{
|
|
int i,index,len;
|
|
int count;
|
|
#ifdef CFG_FPGA_SPARTAN2
|
|
int j;
|
|
#else
|
|
unsigned char b;
|
|
int bit;
|
|
#endif
|
|
|
|
/* display infos on fpgaimage */
|
|
index = 15;
|
|
for (i=0; i<4; i++)
|
|
{
|
|
len = fpgadata[index];
|
|
DBG("FPGA: %s\n", &(fpgadata[index+1]));
|
|
index += len+3;
|
|
}
|
|
|
|
#ifdef CFG_FPGA_SPARTAN2
|
|
/* search for preamble 0xFFFFFFFF */
|
|
while (1)
|
|
{
|
|
if ((fpgadata[index] == 0xff) && (fpgadata[index+1] == 0xff) &&
|
|
(fpgadata[index+2] == 0xff) && (fpgadata[index+3] == 0xff))
|
|
break; /* preamble found */
|
|
else
|
|
index++;
|
|
}
|
|
#else
|
|
/* search for preamble 0xFF2X */
|
|
for (index = 0; index < size-1 ; index++)
|
|
{
|
|
if ((fpgadata[index] == 0xff) && ((fpgadata[index+1] & 0xf0) == 0x30))
|
|
break;
|
|
}
|
|
index += 2;
|
|
#endif
|
|
|
|
DBG("FPGA: configdata starts at position 0x%x\n",index);
|
|
DBG("FPGA: length of fpga-data %d\n", size-index);
|
|
|
|
/*
|
|
* Setup port pins for fpga programming
|
|
*/
|
|
out32(IBM405GP_GPIO0_ODR, 0x00000000); /* no open drain pins */
|
|
out32(IBM405GP_GPIO0_TCR, FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */
|
|
out32(IBM405GP_GPIO0_OR, FPGA_PRG | FPGA_CLK | FPGA_DATA); /* set output pins to high */
|
|
|
|
DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
|
|
DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
|
|
|
|
/*
|
|
* Init fpga by asserting and deasserting PROGRAM*
|
|
*/
|
|
SET_FPGA(FPGA_CLK | FPGA_DATA);
|
|
|
|
/* Wait for FPGA init line low */
|
|
count = 0;
|
|
while (in32(IBM405GP_GPIO0_IR) & FPGA_INIT)
|
|
{
|
|
udelay(1000); /* wait 1ms */
|
|
/* Check for timeout - 100us max, so use 3ms */
|
|
if (count++ > 3)
|
|
{
|
|
DBG("FPGA: Booting failed!\n");
|
|
return ERROR_FPGA_PRG_INIT_LOW;
|
|
}
|
|
}
|
|
|
|
DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
|
|
DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
|
|
|
|
/* deassert PROGRAM* */
|
|
SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA);
|
|
|
|
/* Wait for FPGA end of init period . */
|
|
count = 0;
|
|
while (!(in32(IBM405GP_GPIO0_IR) & FPGA_INIT))
|
|
{
|
|
udelay(1000); /* wait 1ms */
|
|
/* Check for timeout */
|
|
if (count++ > 3)
|
|
{
|
|
DBG("FPGA: Booting failed!\n");
|
|
return ERROR_FPGA_PRG_INIT_HIGH;
|
|
}
|
|
}
|
|
|
|
DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
|
|
DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
|
|
|
|
DBG("write configuration data into fpga\n");
|
|
/* write configuration-data into fpga... */
|
|
|
|
#ifdef CFG_FPGA_SPARTAN2
|
|
/*
|
|
* Load uncompressed image into fpga
|
|
*/
|
|
for (i=index; i<size; i++)
|
|
{
|
|
for (j=0; j<8; j++)
|
|
{
|
|
if ((fpgadata[i] & 0x80) == 0x80)
|
|
{
|
|
FPGA_WRITE_1;
|
|
}
|
|
else
|
|
{
|
|
FPGA_WRITE_0;
|
|
}
|
|
fpgadata[i] <<= 1;
|
|
}
|
|
}
|
|
#else
|
|
/* send 0xff 0x20 */
|
|
FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1;
|
|
FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1; FPGA_WRITE_1;
|
|
FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_1; FPGA_WRITE_0;
|
|
FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_0; FPGA_WRITE_0;
|
|
|
|
/*
|
|
** Bit_DeCompression
|
|
** Code 1 .. maxOnes : n '1's followed by '0'
|
|
** maxOnes + 1 .. maxOnes + 1 : n - 1 '1's no '0'
|
|
** maxOnes + 2 .. 254 : n - (maxOnes + 2) '0's followed by '1'
|
|
** 255 : '1'
|
|
*/
|
|
|
|
for (i=index; i<size; i++)
|
|
{
|
|
b = fpgadata[i];
|
|
if ((b >= 1) && (b <= MAX_ONES))
|
|
{
|
|
for(bit=0; bit<b; bit++)
|
|
{
|
|
FPGA_WRITE_1;
|
|
}
|
|
FPGA_WRITE_0;
|
|
}
|
|
else if (b == (MAX_ONES+1))
|
|
{
|
|
for(bit=1; bit<b; bit++)
|
|
{
|
|
FPGA_WRITE_1;
|
|
}
|
|
}
|
|
else if ((b >= (MAX_ONES+2)) && (b <= 254))
|
|
{
|
|
for(bit=0; bit<(b-(MAX_ONES+2)); bit++)
|
|
{
|
|
FPGA_WRITE_0;
|
|
}
|
|
FPGA_WRITE_1;
|
|
}
|
|
else if (b == 255)
|
|
{
|
|
FPGA_WRITE_1;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
DBG("%s, ",((in32(IBM405GP_GPIO0_IR) & FPGA_DONE) == 0) ? "NOT DONE" : "DONE" );
|
|
DBG("%s\n",((in32(IBM405GP_GPIO0_IR) & FPGA_INIT) == 0) ? "NOT INIT" : "INIT" );
|
|
|
|
/*
|
|
* Check if fpga's DONE signal - correctly booted ?
|
|
*/
|
|
|
|
/* Wait for FPGA end of programming period . */
|
|
count = 0;
|
|
while (!(in32(IBM405GP_GPIO0_IR) & FPGA_DONE))
|
|
{
|
|
udelay(1000); /* wait 1ms */
|
|
/* Check for timeout */
|
|
if (count++ > 3)
|
|
{
|
|
DBG("FPGA: Booting failed!\n");
|
|
return ERROR_FPGA_PRG_DONE;
|
|
}
|
|
}
|
|
|
|
DBG("FPGA: Booting successful!\n");
|
|
return 0;
|
|
}
|
|
|