upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1271 lines
31 KiB
1271 lines
31 KiB
/*
|
|
* Copyright (C) 2006 Freescale Semiconductor, Inc.
|
|
*
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include "common.h"
|
|
#include "net.h"
|
|
#include "malloc.h"
|
|
#include "asm/errno.h"
|
|
#include "asm/io.h"
|
|
#include "asm/immap_qe.h"
|
|
#include "qe.h"
|
|
#include "uccf.h"
|
|
#include "uec.h"
|
|
#include "uec_phy.h"
|
|
|
|
#if defined(CONFIG_QE)
|
|
|
|
#ifdef CONFIG_UEC_ETH1
|
|
static uec_info_t eth1_uec_info = {
|
|
.uf_info = {
|
|
.ucc_num = CFG_UEC1_UCC_NUM,
|
|
.rx_clock = CFG_UEC1_RX_CLK,
|
|
.tx_clock = CFG_UEC1_TX_CLK,
|
|
.eth_type = CFG_UEC1_ETH_TYPE,
|
|
},
|
|
.num_threads_tx = UEC_NUM_OF_THREADS_4,
|
|
.num_threads_rx = UEC_NUM_OF_THREADS_4,
|
|
.riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
|
|
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
|
|
.tx_bd_ring_len = 16,
|
|
.rx_bd_ring_len = 16,
|
|
.phy_address = CFG_UEC1_PHY_ADDR,
|
|
.enet_interface = CFG_UEC1_INTERFACE_MODE,
|
|
};
|
|
#endif
|
|
#ifdef CONFIG_UEC_ETH2
|
|
static uec_info_t eth2_uec_info = {
|
|
.uf_info = {
|
|
.ucc_num = CFG_UEC2_UCC_NUM,
|
|
.rx_clock = CFG_UEC2_RX_CLK,
|
|
.tx_clock = CFG_UEC2_TX_CLK,
|
|
.eth_type = CFG_UEC2_ETH_TYPE,
|
|
},
|
|
.num_threads_tx = UEC_NUM_OF_THREADS_4,
|
|
.num_threads_rx = UEC_NUM_OF_THREADS_4,
|
|
.riscTx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
|
|
.riscRx = QE_RISC_ALLOCATION_RISC1_AND_RISC2,
|
|
.tx_bd_ring_len = 16,
|
|
.rx_bd_ring_len = 16,
|
|
.phy_address = CFG_UEC2_PHY_ADDR,
|
|
.enet_interface = CFG_UEC2_INTERFACE_MODE,
|
|
};
|
|
#endif
|
|
|
|
static int uec_mac_enable(uec_private_t *uec, comm_dir_e mode)
|
|
{
|
|
uec_t *uec_regs;
|
|
u32 maccfg1;
|
|
|
|
if (!uec) {
|
|
printf("%s: uec not initial\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
uec_regs = uec->uec_regs;
|
|
|
|
maccfg1 = in_be32(&uec_regs->maccfg1);
|
|
|
|
if (mode & COMM_DIR_TX) {
|
|
maccfg1 |= MACCFG1_ENABLE_TX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_tx_enabled = 1;
|
|
}
|
|
|
|
if (mode & COMM_DIR_RX) {
|
|
maccfg1 |= MACCFG1_ENABLE_RX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_rx_enabled = 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_mac_disable(uec_private_t *uec, comm_dir_e mode)
|
|
{
|
|
uec_t *uec_regs;
|
|
u32 maccfg1;
|
|
|
|
if (!uec) {
|
|
printf("%s: uec not initial\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
uec_regs = uec->uec_regs;
|
|
|
|
maccfg1 = in_be32(&uec_regs->maccfg1);
|
|
|
|
if (mode & COMM_DIR_TX) {
|
|
maccfg1 &= ~MACCFG1_ENABLE_TX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_tx_enabled = 0;
|
|
}
|
|
|
|
if (mode & COMM_DIR_RX) {
|
|
maccfg1 &= ~MACCFG1_ENABLE_RX;
|
|
out_be32(&uec_regs->maccfg1, maccfg1);
|
|
uec->mac_rx_enabled = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_graceful_stop_tx(uec_private_t *uec)
|
|
{
|
|
ucc_fast_t *uf_regs;
|
|
u32 cecr_subblock;
|
|
u32 ucce;
|
|
|
|
if (!uec || !uec->uccf) {
|
|
printf("%s: No handle passed.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
uf_regs = uec->uccf->uf_regs;
|
|
|
|
/* Clear the grace stop event */
|
|
out_be32(&uf_regs->ucce, UCCE_GRA);
|
|
|
|
/* Issue host command */
|
|
cecr_subblock =
|
|
ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
|
|
/* Wait for command to complete */
|
|
do {
|
|
ucce = in_be32(&uf_regs->ucce);
|
|
} while (! (ucce & UCCE_GRA));
|
|
|
|
uec->grace_stopped_tx = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_graceful_stop_rx(uec_private_t *uec)
|
|
{
|
|
u32 cecr_subblock;
|
|
u8 ack;
|
|
|
|
if (!uec) {
|
|
printf("%s: No handle passed.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!uec->p_rx_glbl_pram) {
|
|
printf("%s: No init rx global parameter\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Clear acknowledge bit */
|
|
ack = uec->p_rx_glbl_pram->rxgstpack;
|
|
ack &= ~GRACEFUL_STOP_ACKNOWLEDGE_RX;
|
|
uec->p_rx_glbl_pram->rxgstpack = ack;
|
|
|
|
/* Keep issuing cmd and checking ack bit until it is asserted */
|
|
do {
|
|
/* Issue host command */
|
|
cecr_subblock =
|
|
ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_GRACEFUL_STOP_RX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
ack = uec->p_rx_glbl_pram->rxgstpack;
|
|
} while (! (ack & GRACEFUL_STOP_ACKNOWLEDGE_RX ));
|
|
|
|
uec->grace_stopped_rx = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_restart_tx(uec_private_t *uec)
|
|
{
|
|
u32 cecr_subblock;
|
|
|
|
if (!uec || !uec->uec_info) {
|
|
printf("%s: No handle passed.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
cecr_subblock =
|
|
ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
|
|
uec->grace_stopped_tx = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_restart_rx(uec_private_t *uec)
|
|
{
|
|
u32 cecr_subblock;
|
|
|
|
if (!uec || !uec->uec_info) {
|
|
printf("%s: No handle passed.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
cecr_subblock =
|
|
ucc_fast_get_qe_cr_subblock(uec->uec_info->uf_info.ucc_num);
|
|
qe_issue_cmd(QE_RESTART_RX, cecr_subblock,
|
|
(u8)QE_CR_PROTOCOL_ETHERNET, 0);
|
|
|
|
uec->grace_stopped_rx = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_open(uec_private_t *uec, comm_dir_e mode)
|
|
{
|
|
ucc_fast_private_t *uccf;
|
|
|
|
if (!uec || !uec->uccf) {
|
|
printf("%s: No handle passed.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
uccf = uec->uccf;
|
|
|
|
/* check if the UCC number is in range. */
|
|
if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
|
|
printf("%s: ucc_num out of range.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Enable MAC */
|
|
uec_mac_enable(uec, mode);
|
|
|
|
/* Enable UCC fast */
|
|
ucc_fast_enable(uccf, mode);
|
|
|
|
/* RISC microcode start */
|
|
if ((mode & COMM_DIR_TX) && uec->grace_stopped_tx) {
|
|
uec_restart_tx(uec);
|
|
}
|
|
if ((mode & COMM_DIR_RX) && uec->grace_stopped_rx) {
|
|
uec_restart_rx(uec);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_stop(uec_private_t *uec, comm_dir_e mode)
|
|
{
|
|
ucc_fast_private_t *uccf;
|
|
|
|
if (!uec || !uec->uccf) {
|
|
printf("%s: No handle passed.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
uccf = uec->uccf;
|
|
|
|
/* check if the UCC number is in range. */
|
|
if (uec->uec_info->uf_info.ucc_num >= UCC_MAX_NUM) {
|
|
printf("%s: ucc_num out of range.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
/* Stop any transmissions */
|
|
if ((mode & COMM_DIR_TX) && !uec->grace_stopped_tx) {
|
|
uec_graceful_stop_tx(uec);
|
|
}
|
|
/* Stop any receptions */
|
|
if ((mode & COMM_DIR_RX) && !uec->grace_stopped_rx) {
|
|
uec_graceful_stop_rx(uec);
|
|
}
|
|
|
|
/* Disable the UCC fast */
|
|
ucc_fast_disable(uec->uccf, mode);
|
|
|
|
/* Disable the MAC */
|
|
uec_mac_disable(uec, mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_set_mac_duplex(uec_private_t *uec, int duplex)
|
|
{
|
|
uec_t *uec_regs;
|
|
u32 maccfg2;
|
|
|
|
if (!uec) {
|
|
printf("%s: uec not initial\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
uec_regs = uec->uec_regs;
|
|
|
|
if (duplex == DUPLEX_HALF) {
|
|
maccfg2 = in_be32(&uec_regs->maccfg2);
|
|
maccfg2 &= ~MACCFG2_FDX;
|
|
out_be32(&uec_regs->maccfg2, maccfg2);
|
|
}
|
|
|
|
if (duplex == DUPLEX_FULL) {
|
|
maccfg2 = in_be32(&uec_regs->maccfg2);
|
|
maccfg2 |= MACCFG2_FDX;
|
|
out_be32(&uec_regs->maccfg2, maccfg2);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_set_mac_if_mode(uec_private_t *uec, enet_interface_e if_mode)
|
|
{
|
|
enet_interface_e enet_if_mode;
|
|
uec_info_t *uec_info;
|
|
uec_t *uec_regs;
|
|
u32 upsmr;
|
|
u32 maccfg2;
|
|
|
|
if (!uec) {
|
|
printf("%s: uec not initial\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
uec_info = uec->uec_info;
|
|
uec_regs = uec->uec_regs;
|
|
enet_if_mode = if_mode;
|
|
|
|
maccfg2 = in_be32(&uec_regs->maccfg2);
|
|
maccfg2 &= ~MACCFG2_INTERFACE_MODE_MASK;
|
|
|
|
upsmr = in_be32(&uec->uccf->uf_regs->upsmr);
|
|
upsmr &= ~(UPSMR_RPM | UPSMR_TBIM | UPSMR_R10M | UPSMR_RMM);
|
|
|
|
switch (enet_if_mode) {
|
|
case ENET_100_MII:
|
|
case ENET_10_MII:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
|
|
break;
|
|
case ENET_1000_GMII:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
|
|
break;
|
|
case ENET_1000_TBI:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
|
|
upsmr |= UPSMR_TBIM;
|
|
break;
|
|
case ENET_1000_RTBI:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
|
|
upsmr |= (UPSMR_RPM | UPSMR_TBIM);
|
|
break;
|
|
case ENET_1000_RGMII:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_BYTE;
|
|
upsmr |= UPSMR_RPM;
|
|
break;
|
|
case ENET_100_RGMII:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
|
|
upsmr |= UPSMR_RPM;
|
|
break;
|
|
case ENET_10_RGMII:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
|
|
upsmr |= (UPSMR_RPM | UPSMR_R10M);
|
|
break;
|
|
case ENET_100_RMII:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
|
|
upsmr |= UPSMR_RMM;
|
|
break;
|
|
case ENET_10_RMII:
|
|
maccfg2 |= MACCFG2_INTERFACE_MODE_NIBBLE;
|
|
upsmr |= (UPSMR_R10M | UPSMR_RMM);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
out_be32(&uec_regs->maccfg2, maccfg2);
|
|
out_be32(&uec->uccf->uf_regs->upsmr, upsmr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int init_mii_management_configuration(uec_t *uec_regs)
|
|
{
|
|
uint timeout = 0x1000;
|
|
u32 miimcfg = 0;
|
|
|
|
miimcfg = in_be32(&uec_regs->miimcfg);
|
|
miimcfg |= MIIMCFG_MNGMNT_CLC_DIV_INIT_VALUE;
|
|
out_be32(&uec_regs->miimcfg, miimcfg);
|
|
|
|
/* Wait until the bus is free */
|
|
while ((in_be32(&uec_regs->miimcfg) & MIIMIND_BUSY) && timeout--);
|
|
if (timeout <= 0) {
|
|
printf("%s: The MII Bus is stuck!", __FUNCTION__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int init_phy(struct eth_device *dev)
|
|
{
|
|
uec_private_t *uec;
|
|
uec_t *uec_regs;
|
|
struct uec_mii_info *mii_info;
|
|
struct phy_info *curphy;
|
|
int err;
|
|
|
|
uec = (uec_private_t *)dev->priv;
|
|
uec_regs = uec->uec_regs;
|
|
|
|
uec->oldlink = 0;
|
|
uec->oldspeed = 0;
|
|
uec->oldduplex = -1;
|
|
|
|
mii_info = malloc(sizeof(*mii_info));
|
|
if (!mii_info) {
|
|
printf("%s: Could not allocate mii_info", dev->name);
|
|
return -ENOMEM;
|
|
}
|
|
memset(mii_info, 0, sizeof(*mii_info));
|
|
|
|
if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
|
|
mii_info->speed = SPEED_1000;
|
|
} else {
|
|
mii_info->speed = SPEED_100;
|
|
}
|
|
|
|
mii_info->duplex = DUPLEX_FULL;
|
|
mii_info->pause = 0;
|
|
mii_info->link = 1;
|
|
|
|
mii_info->advertising = (ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_1000baseT_Full);
|
|
mii_info->autoneg = 1;
|
|
mii_info->mii_id = uec->uec_info->phy_address;
|
|
mii_info->dev = dev;
|
|
|
|
mii_info->mdio_read = &read_phy_reg;
|
|
mii_info->mdio_write = &write_phy_reg;
|
|
|
|
uec->mii_info = mii_info;
|
|
|
|
if (init_mii_management_configuration(uec_regs)) {
|
|
printf("%s: The MII Bus is stuck!", dev->name);
|
|
err = -1;
|
|
goto bus_fail;
|
|
}
|
|
|
|
/* get info for this PHY */
|
|
curphy = get_phy_info(uec->mii_info);
|
|
if (!curphy) {
|
|
printf("%s: No PHY found", dev->name);
|
|
err = -1;
|
|
goto no_phy;
|
|
}
|
|
|
|
mii_info->phyinfo = curphy;
|
|
|
|
/* Run the commands which initialize the PHY */
|
|
if (curphy->init) {
|
|
err = curphy->init(uec->mii_info);
|
|
if (err)
|
|
goto phy_init_fail;
|
|
}
|
|
|
|
return 0;
|
|
|
|
phy_init_fail:
|
|
no_phy:
|
|
bus_fail:
|
|
free(mii_info);
|
|
return err;
|
|
}
|
|
|
|
static void adjust_link(struct eth_device *dev)
|
|
{
|
|
uec_private_t *uec = (uec_private_t *)dev->priv;
|
|
uec_t *uec_regs;
|
|
struct uec_mii_info *mii_info = uec->mii_info;
|
|
|
|
extern void change_phy_interface_mode(struct eth_device *dev,
|
|
enet_interface_e mode);
|
|
uec_regs = uec->uec_regs;
|
|
|
|
if (mii_info->link) {
|
|
/* Now we make sure that we can be in full duplex mode.
|
|
* If not, we operate in half-duplex mode. */
|
|
if (mii_info->duplex != uec->oldduplex) {
|
|
if (!(mii_info->duplex)) {
|
|
uec_set_mac_duplex(uec, DUPLEX_HALF);
|
|
printf("%s: Half Duplex\n", dev->name);
|
|
} else {
|
|
uec_set_mac_duplex(uec, DUPLEX_FULL);
|
|
printf("%s: Full Duplex\n", dev->name);
|
|
}
|
|
uec->oldduplex = mii_info->duplex;
|
|
}
|
|
|
|
if (mii_info->speed != uec->oldspeed) {
|
|
if (uec->uec_info->uf_info.eth_type == GIGA_ETH) {
|
|
switch (mii_info->speed) {
|
|
case 1000:
|
|
break;
|
|
case 100:
|
|
printf ("switching to rgmii 100\n");
|
|
/* change phy to rgmii 100 */
|
|
change_phy_interface_mode(dev,
|
|
ENET_100_RGMII);
|
|
/* change the MAC interface mode */
|
|
uec_set_mac_if_mode(uec,ENET_100_RGMII);
|
|
break;
|
|
case 10:
|
|
printf ("switching to rgmii 10\n");
|
|
/* change phy to rgmii 10 */
|
|
change_phy_interface_mode(dev,
|
|
ENET_10_RGMII);
|
|
/* change the MAC interface mode */
|
|
uec_set_mac_if_mode(uec,ENET_10_RGMII);
|
|
break;
|
|
default:
|
|
printf("%s: Ack,Speed(%d)is illegal\n",
|
|
dev->name, mii_info->speed);
|
|
break;
|
|
}
|
|
}
|
|
|
|
printf("%s: Speed %dBT\n", dev->name, mii_info->speed);
|
|
uec->oldspeed = mii_info->speed;
|
|
}
|
|
|
|
if (!uec->oldlink) {
|
|
printf("%s: Link is up\n", dev->name);
|
|
uec->oldlink = 1;
|
|
}
|
|
|
|
} else { /* if (mii_info->link) */
|
|
if (uec->oldlink) {
|
|
printf("%s: Link is down\n", dev->name);
|
|
uec->oldlink = 0;
|
|
uec->oldspeed = 0;
|
|
uec->oldduplex = -1;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void phy_change(struct eth_device *dev)
|
|
{
|
|
uec_private_t *uec = (uec_private_t *)dev->priv;
|
|
uec_t *uec_regs;
|
|
int result = 0;
|
|
|
|
uec_regs = uec->uec_regs;
|
|
|
|
/* Delay 5s to give the PHY a chance to change the register state */
|
|
udelay(5000000);
|
|
|
|
/* Update the link, speed, duplex */
|
|
result = uec->mii_info->phyinfo->read_status(uec->mii_info);
|
|
|
|
/* Adjust the interface according to speed */
|
|
if ((0 == result) || (uec->mii_info->link == 0)) {
|
|
adjust_link(dev);
|
|
}
|
|
}
|
|
|
|
static int uec_set_mac_address(uec_private_t *uec, u8 *mac_addr)
|
|
{
|
|
uec_t *uec_regs;
|
|
u32 mac_addr1;
|
|
u32 mac_addr2;
|
|
|
|
if (!uec) {
|
|
printf("%s: uec not initial\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
uec_regs = uec->uec_regs;
|
|
|
|
/* if a station address of 0x12345678ABCD, perform a write to
|
|
MACSTNADDR1 of 0xCDAB7856,
|
|
MACSTNADDR2 of 0x34120000 */
|
|
|
|
mac_addr1 = (mac_addr[5] << 24) | (mac_addr[4] << 16) | \
|
|
(mac_addr[3] << 8) | (mac_addr[2]);
|
|
out_be32(&uec_regs->macstnaddr1, mac_addr1);
|
|
|
|
mac_addr2 = ((mac_addr[1] << 24) | (mac_addr[0] << 16)) & 0xffff0000;
|
|
out_be32(&uec_regs->macstnaddr2, mac_addr2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_convert_threads_num(uec_num_of_threads_e threads_num,
|
|
int *threads_num_ret)
|
|
{
|
|
int num_threads_numerica;
|
|
|
|
switch (threads_num) {
|
|
case UEC_NUM_OF_THREADS_1:
|
|
num_threads_numerica = 1;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_2:
|
|
num_threads_numerica = 2;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_4:
|
|
num_threads_numerica = 4;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_6:
|
|
num_threads_numerica = 6;
|
|
break;
|
|
case UEC_NUM_OF_THREADS_8:
|
|
num_threads_numerica = 8;
|
|
break;
|
|
default:
|
|
printf("%s: Bad number of threads value.",
|
|
__FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*threads_num_ret = num_threads_numerica;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uec_init_tx_parameter(uec_private_t *uec, int num_threads_tx)
|
|
{
|
|
uec_info_t *uec_info;
|
|
u32 end_bd;
|
|
u8 bmrx = 0;
|
|
int i;
|
|
|
|
uec_info = uec->uec_info;
|
|
|
|
/* Alloc global Tx parameter RAM page */
|
|
uec->tx_glbl_pram_offset = qe_muram_alloc(
|
|
sizeof(uec_tx_global_pram_t),
|
|
UEC_TX_GLOBAL_PRAM_ALIGNMENT);
|
|
uec->p_tx_glbl_pram = (uec_tx_global_pram_t *)
|
|
qe_muram_addr(uec->tx_glbl_pram_offset);
|
|
|
|
/* Zero the global Tx prameter RAM */
|
|
memset(uec->p_tx_glbl_pram, 0, sizeof(uec_tx_global_pram_t));
|
|
|
|
/* Init global Tx parameter RAM */
|
|
|
|
/* TEMODER, RMON statistics disable, one Tx queue */
|
|
out_be16(&uec->p_tx_glbl_pram->temoder, TEMODER_INIT_VALUE);
|
|
|
|
/* SQPTR */
|
|
uec->send_q_mem_reg_offset = qe_muram_alloc(
|
|
sizeof(uec_send_queue_qd_t),
|
|
UEC_SEND_QUEUE_QUEUE_DESCRIPTOR_ALIGNMENT);
|
|
uec->p_send_q_mem_reg = (uec_send_queue_mem_region_t *)
|
|
qe_muram_addr(uec->send_q_mem_reg_offset);
|
|
out_be32(&uec->p_tx_glbl_pram->sqptr, uec->send_q_mem_reg_offset);
|
|
|
|
/* Setup the table with TxBDs ring */
|
|
end_bd = (u32)uec->p_tx_bd_ring + (uec_info->tx_bd_ring_len - 1)
|
|
* SIZEOFBD;
|
|
out_be32(&uec->p_send_q_mem_reg->sqqd[0].bd_ring_base,
|
|
(u32)(uec->p_tx_bd_ring));
|
|
out_be32(&uec->p_send_q_mem_reg->sqqd[0].last_bd_completed_address,
|
|
end_bd);
|
|
|
|
/* Scheduler Base Pointer, we have only one Tx queue, no need it */
|
|
out_be32(&uec->p_tx_glbl_pram->schedulerbasepointer, 0);
|
|
|
|
/* TxRMON Base Pointer, TxRMON disable, we don't need it */
|
|
out_be32(&uec->p_tx_glbl_pram->txrmonbaseptr, 0);
|
|
|
|
/* TSTATE, global snooping, big endian, the CSB bus selected */
|
|
bmrx = BMR_INIT_VALUE;
|
|
out_be32(&uec->p_tx_glbl_pram->tstate, ((u32)(bmrx) << BMR_SHIFT));
|
|
|
|
/* IPH_Offset */
|
|
for (i = 0; i < MAX_IPH_OFFSET_ENTRY; i++) {
|
|
out_8(&uec->p_tx_glbl_pram->iphoffset[i], 0);
|
|
}
|
|
|
|
/* VTAG table */
|
|
for (i = 0; i < UEC_TX_VTAG_TABLE_ENTRY_MAX; i++) {
|
|
out_be32(&uec->p_tx_glbl_pram->vtagtable[i], 0);
|
|
}
|
|
|
|
/* TQPTR */
|
|
uec->thread_dat_tx_offset = qe_muram_alloc(
|
|
num_threads_tx * sizeof(uec_thread_data_tx_t) +
|
|
32 *(num_threads_tx == 1), UEC_THREAD_DATA_ALIGNMENT);
|
|
|
|
uec->p_thread_data_tx = (uec_thread_data_tx_t *)
|
|
qe_muram_addr(uec->thread_dat_tx_offset);
|
|
out_be32(&uec->p_tx_glbl_pram->tqptr, uec->thread_dat_tx_offset);
|
|
}
|
|
|
|
static void uec_init_rx_parameter(uec_private_t *uec, int num_threads_rx)
|
|
{
|
|
u8 bmrx = 0;
|
|
int i;
|
|
uec_82xx_address_filtering_pram_t *p_af_pram;
|
|
|
|
/* Allocate global Rx parameter RAM page */
|
|
uec->rx_glbl_pram_offset = qe_muram_alloc(
|
|
sizeof(uec_rx_global_pram_t), UEC_RX_GLOBAL_PRAM_ALIGNMENT);
|
|
uec->p_rx_glbl_pram = (uec_rx_global_pram_t *)
|
|
qe_muram_addr(uec->rx_glbl_pram_offset);
|
|
|
|
/* Zero Global Rx parameter RAM */
|
|
memset(uec->p_rx_glbl_pram, 0, sizeof(uec_rx_global_pram_t));
|
|
|
|
/* Init global Rx parameter RAM */
|
|
/* REMODER, Extended feature mode disable, VLAN disable,
|
|
LossLess flow control disable, Receive firmware statisic disable,
|
|
Extended address parsing mode disable, One Rx queues,
|
|
Dynamic maximum/minimum frame length disable, IP checksum check
|
|
disable, IP address alignment disable
|
|
*/
|
|
out_be32(&uec->p_rx_glbl_pram->remoder, REMODER_INIT_VALUE);
|
|
|
|
/* RQPTR */
|
|
uec->thread_dat_rx_offset = qe_muram_alloc(
|
|
num_threads_rx * sizeof(uec_thread_data_rx_t),
|
|
UEC_THREAD_DATA_ALIGNMENT);
|
|
uec->p_thread_data_rx = (uec_thread_data_rx_t *)
|
|
qe_muram_addr(uec->thread_dat_rx_offset);
|
|
out_be32(&uec->p_rx_glbl_pram->rqptr, uec->thread_dat_rx_offset);
|
|
|
|
/* Type_or_Len */
|
|
out_be16(&uec->p_rx_glbl_pram->typeorlen, 3072);
|
|
|
|
/* RxRMON base pointer, we don't need it */
|
|
out_be32(&uec->p_rx_glbl_pram->rxrmonbaseptr, 0);
|
|
|
|
/* IntCoalescingPTR, we don't need it, no interrupt */
|
|
out_be32(&uec->p_rx_glbl_pram->intcoalescingptr, 0);
|
|
|
|
/* RSTATE, global snooping, big endian, the CSB bus selected */
|
|
bmrx = BMR_INIT_VALUE;
|
|
out_8(&uec->p_rx_glbl_pram->rstate, bmrx);
|
|
|
|
/* MRBLR */
|
|
out_be16(&uec->p_rx_glbl_pram->mrblr, MAX_RXBUF_LEN);
|
|
|
|
/* RBDQPTR */
|
|
uec->rx_bd_qs_tbl_offset = qe_muram_alloc(
|
|
sizeof(uec_rx_bd_queues_entry_t) + \
|
|
sizeof(uec_rx_prefetched_bds_t),
|
|
UEC_RX_BD_QUEUES_ALIGNMENT);
|
|
uec->p_rx_bd_qs_tbl = (uec_rx_bd_queues_entry_t *)
|
|
qe_muram_addr(uec->rx_bd_qs_tbl_offset);
|
|
|
|
/* Zero it */
|
|
memset(uec->p_rx_bd_qs_tbl, 0, sizeof(uec_rx_bd_queues_entry_t) + \
|
|
sizeof(uec_rx_prefetched_bds_t));
|
|
out_be32(&uec->p_rx_glbl_pram->rbdqptr, uec->rx_bd_qs_tbl_offset);
|
|
out_be32(&uec->p_rx_bd_qs_tbl->externalbdbaseptr,
|
|
(u32)uec->p_rx_bd_ring);
|
|
|
|
/* MFLR */
|
|
out_be16(&uec->p_rx_glbl_pram->mflr, MAX_FRAME_LEN);
|
|
/* MINFLR */
|
|
out_be16(&uec->p_rx_glbl_pram->minflr, MIN_FRAME_LEN);
|
|
/* MAXD1 */
|
|
out_be16(&uec->p_rx_glbl_pram->maxd1, MAX_DMA1_LEN);
|
|
/* MAXD2 */
|
|
out_be16(&uec->p_rx_glbl_pram->maxd2, MAX_DMA2_LEN);
|
|
/* ECAM_PTR */
|
|
out_be32(&uec->p_rx_glbl_pram->ecamptr, 0);
|
|
/* L2QT */
|
|
out_be32(&uec->p_rx_glbl_pram->l2qt, 0);
|
|
/* L3QT */
|
|
for (i = 0; i < 8; i++) {
|
|
out_be32(&uec->p_rx_glbl_pram->l3qt[i], 0);
|
|
}
|
|
|
|
/* VLAN_TYPE */
|
|
out_be16(&uec->p_rx_glbl_pram->vlantype, 0x8100);
|
|
/* TCI */
|
|
out_be16(&uec->p_rx_glbl_pram->vlantci, 0);
|
|
|
|
/* Clear PQ2 style address filtering hash table */
|
|
p_af_pram = (uec_82xx_address_filtering_pram_t *) \
|
|
uec->p_rx_glbl_pram->addressfiltering;
|
|
|
|
p_af_pram->iaddr_h = 0;
|
|
p_af_pram->iaddr_l = 0;
|
|
p_af_pram->gaddr_h = 0;
|
|
p_af_pram->gaddr_l = 0;
|
|
}
|
|
|
|
static int uec_issue_init_enet_rxtx_cmd(uec_private_t *uec,
|
|
int thread_tx, int thread_rx)
|
|
{
|
|
uec_init_cmd_pram_t *p_init_enet_param;
|
|
u32 init_enet_param_offset;
|
|
uec_info_t *uec_info;
|
|
int i;
|
|
int snum;
|
|
u32 init_enet_offset;
|
|
u32 entry_val;
|
|
u32 command;
|
|
u32 cecr_subblock;
|
|
|
|
uec_info = uec->uec_info;
|
|
|
|
/* Allocate init enet command parameter */
|
|
uec->init_enet_param_offset = qe_muram_alloc(
|
|
sizeof(uec_init_cmd_pram_t), 4);
|
|
init_enet_param_offset = uec->init_enet_param_offset;
|
|
uec->p_init_enet_param = (uec_init_cmd_pram_t *)
|
|
qe_muram_addr(uec->init_enet_param_offset);
|
|
|
|
/* Zero init enet command struct */
|
|
memset((void *)uec->p_init_enet_param, 0, sizeof(uec_init_cmd_pram_t));
|
|
|
|
/* Init the command struct */
|
|
p_init_enet_param = uec->p_init_enet_param;
|
|
p_init_enet_param->resinit0 = ENET_INIT_PARAM_MAGIC_RES_INIT0;
|
|
p_init_enet_param->resinit1 = ENET_INIT_PARAM_MAGIC_RES_INIT1;
|
|
p_init_enet_param->resinit2 = ENET_INIT_PARAM_MAGIC_RES_INIT2;
|
|
p_init_enet_param->resinit3 = ENET_INIT_PARAM_MAGIC_RES_INIT3;
|
|
p_init_enet_param->resinit4 = ENET_INIT_PARAM_MAGIC_RES_INIT4;
|
|
p_init_enet_param->largestexternallookupkeysize = 0;
|
|
|
|
p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_rx)
|
|
<< ENET_INIT_PARAM_RGF_SHIFT;
|
|
p_init_enet_param->rgftgfrxglobal |= ((u32)uec_info->num_threads_tx)
|
|
<< ENET_INIT_PARAM_TGF_SHIFT;
|
|
|
|
/* Init Rx global parameter pointer */
|
|
p_init_enet_param->rgftgfrxglobal |= uec->rx_glbl_pram_offset |
|
|
(u32)uec_info->riscRx;
|
|
|
|
/* Init Rx threads */
|
|
for (i = 0; i < (thread_rx + 1); i++) {
|
|
if ((snum = qe_get_snum()) < 0) {
|
|
printf("%s can not get snum\n", __FUNCTION__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (i==0) {
|
|
init_enet_offset = 0;
|
|
} else {
|
|
init_enet_offset = qe_muram_alloc(
|
|
sizeof(uec_thread_rx_pram_t),
|
|
UEC_THREAD_RX_PRAM_ALIGNMENT);
|
|
}
|
|
|
|
entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
|
|
init_enet_offset | (u32)uec_info->riscRx;
|
|
p_init_enet_param->rxthread[i] = entry_val;
|
|
}
|
|
|
|
/* Init Tx global parameter pointer */
|
|
p_init_enet_param->txglobal = uec->tx_glbl_pram_offset |
|
|
(u32)uec_info->riscTx;
|
|
|
|
/* Init Tx threads */
|
|
for (i = 0; i < thread_tx; i++) {
|
|
if ((snum = qe_get_snum()) < 0) {
|
|
printf("%s can not get snum\n", __FUNCTION__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
init_enet_offset = qe_muram_alloc(sizeof(uec_thread_tx_pram_t),
|
|
UEC_THREAD_TX_PRAM_ALIGNMENT);
|
|
|
|
entry_val = ((u32)snum << ENET_INIT_PARAM_SNUM_SHIFT) |
|
|
init_enet_offset | (u32)uec_info->riscTx;
|
|
p_init_enet_param->txthread[i] = entry_val;
|
|
}
|
|
|
|
__asm__ __volatile__("sync");
|
|
|
|
/* Issue QE command */
|
|
command = QE_INIT_TX_RX;
|
|
cecr_subblock = ucc_fast_get_qe_cr_subblock(
|
|
uec->uec_info->uf_info.ucc_num);
|
|
qe_issue_cmd(command, cecr_subblock, (u8) QE_CR_PROTOCOL_ETHERNET,
|
|
init_enet_param_offset);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_startup(uec_private_t *uec)
|
|
{
|
|
uec_info_t *uec_info;
|
|
ucc_fast_info_t *uf_info;
|
|
ucc_fast_private_t *uccf;
|
|
ucc_fast_t *uf_regs;
|
|
uec_t *uec_regs;
|
|
int num_threads_tx;
|
|
int num_threads_rx;
|
|
u32 utbipar;
|
|
enet_interface_e enet_interface;
|
|
u32 length;
|
|
u32 align;
|
|
qe_bd_t *bd;
|
|
u8 *buf;
|
|
int i;
|
|
|
|
if (!uec || !uec->uec_info) {
|
|
printf("%s: uec or uec_info not initial\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
uec_info = uec->uec_info;
|
|
uf_info = &(uec_info->uf_info);
|
|
|
|
/* Check if Rx BD ring len is illegal */
|
|
if ((uec_info->rx_bd_ring_len < UEC_RX_BD_RING_SIZE_MIN) || \
|
|
(uec_info->rx_bd_ring_len % UEC_RX_BD_RING_SIZE_ALIGNMENT)) {
|
|
printf("%s: Rx BD ring len must be multiple of 4, and > 8.\n",
|
|
__FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if Tx BD ring len is illegal */
|
|
if (uec_info->tx_bd_ring_len < UEC_TX_BD_RING_SIZE_MIN) {
|
|
printf("%s: Tx BD ring length must not be smaller than 2.\n",
|
|
__FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Check if MRBLR is illegal */
|
|
if ((MAX_RXBUF_LEN == 0) || (MAX_RXBUF_LEN % UEC_MRBLR_ALIGNMENT)) {
|
|
printf("%s: max rx buffer length must be mutliple of 128.\n",
|
|
__FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Both Rx and Tx are stopped */
|
|
uec->grace_stopped_rx = 1;
|
|
uec->grace_stopped_tx = 1;
|
|
|
|
/* Init UCC fast */
|
|
if (ucc_fast_init(uf_info, &uccf)) {
|
|
printf("%s: failed to init ucc fast\n", __FUNCTION__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Save uccf */
|
|
uec->uccf = uccf;
|
|
|
|
/* Convert the Tx threads number */
|
|
if (uec_convert_threads_num(uec_info->num_threads_tx,
|
|
&num_threads_tx)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Convert the Rx threads number */
|
|
if (uec_convert_threads_num(uec_info->num_threads_rx,
|
|
&num_threads_rx)) {
|
|
return -EINVAL;
|
|
}
|
|
|
|
uf_regs = uccf->uf_regs;
|
|
|
|
/* UEC register is following UCC fast registers */
|
|
uec_regs = (uec_t *)(&uf_regs->ucc_eth);
|
|
|
|
/* Save the UEC register pointer to UEC private struct */
|
|
uec->uec_regs = uec_regs;
|
|
|
|
/* Init UPSMR, enable hardware statistics (UCC) */
|
|
out_be32(&uec->uccf->uf_regs->upsmr, UPSMR_INIT_VALUE);
|
|
|
|
/* Init MACCFG1, flow control disable, disable Tx and Rx */
|
|
out_be32(&uec_regs->maccfg1, MACCFG1_INIT_VALUE);
|
|
|
|
/* Init MACCFG2, length check, MAC PAD and CRC enable */
|
|
out_be32(&uec_regs->maccfg2, MACCFG2_INIT_VALUE);
|
|
|
|
/* Setup MAC interface mode */
|
|
uec_set_mac_if_mode(uec, uec_info->enet_interface);
|
|
|
|
/* Setup MII master clock source */
|
|
qe_set_mii_clk_src(uec_info->uf_info.ucc_num);
|
|
|
|
/* Setup UTBIPAR */
|
|
utbipar = in_be32(&uec_regs->utbipar);
|
|
utbipar &= ~UTBIPAR_PHY_ADDRESS_MASK;
|
|
enet_interface = uec->uec_info->enet_interface;
|
|
if (enet_interface == ENET_1000_TBI ||
|
|
enet_interface == ENET_1000_RTBI) {
|
|
utbipar |= (uec_info->phy_address + uec_info->uf_info.ucc_num)
|
|
<< UTBIPAR_PHY_ADDRESS_SHIFT;
|
|
} else {
|
|
utbipar |= (0x10 + uec_info->uf_info.ucc_num)
|
|
<< UTBIPAR_PHY_ADDRESS_SHIFT;
|
|
}
|
|
|
|
out_be32(&uec_regs->utbipar, utbipar);
|
|
|
|
/* Allocate Tx BDs */
|
|
length = ((uec_info->tx_bd_ring_len * SIZEOFBD) /
|
|
UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) *
|
|
UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
|
|
if ((uec_info->tx_bd_ring_len * SIZEOFBD) %
|
|
UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT) {
|
|
length += UEC_TX_BD_RING_SIZE_MEMORY_ALIGNMENT;
|
|
}
|
|
|
|
align = UEC_TX_BD_RING_ALIGNMENT;
|
|
uec->tx_bd_ring_offset = (u32)malloc((u32)(length + align));
|
|
if (uec->tx_bd_ring_offset != 0) {
|
|
uec->p_tx_bd_ring = (u8 *)((uec->tx_bd_ring_offset + align)
|
|
& ~(align - 1));
|
|
}
|
|
|
|
/* Zero all of Tx BDs */
|
|
memset((void *)(uec->tx_bd_ring_offset), 0, length + align);
|
|
|
|
/* Allocate Rx BDs */
|
|
length = uec_info->rx_bd_ring_len * SIZEOFBD;
|
|
align = UEC_RX_BD_RING_ALIGNMENT;
|
|
uec->rx_bd_ring_offset = (u32)(malloc((u32)(length + align)));
|
|
if (uec->rx_bd_ring_offset != 0) {
|
|
uec->p_rx_bd_ring = (u8 *)((uec->rx_bd_ring_offset + align)
|
|
& ~(align - 1));
|
|
}
|
|
|
|
/* Zero all of Rx BDs */
|
|
memset((void *)(uec->rx_bd_ring_offset), 0, length + align);
|
|
|
|
/* Allocate Rx buffer */
|
|
length = uec_info->rx_bd_ring_len * MAX_RXBUF_LEN;
|
|
align = UEC_RX_DATA_BUF_ALIGNMENT;
|
|
uec->rx_buf_offset = (u32)malloc(length + align);
|
|
if (uec->rx_buf_offset != 0) {
|
|
uec->p_rx_buf = (u8 *)((uec->rx_buf_offset + align)
|
|
& ~(align - 1));
|
|
}
|
|
|
|
/* Zero all of the Rx buffer */
|
|
memset((void *)(uec->rx_buf_offset), 0, length + align);
|
|
|
|
/* Init TxBD ring */
|
|
bd = (qe_bd_t *)uec->p_tx_bd_ring;
|
|
uec->txBd = bd;
|
|
|
|
for (i = 0; i < uec_info->tx_bd_ring_len; i++) {
|
|
BD_DATA_CLEAR(bd);
|
|
BD_STATUS_SET(bd, 0);
|
|
BD_LENGTH_SET(bd, 0);
|
|
bd ++;
|
|
}
|
|
BD_STATUS_SET((--bd), TxBD_WRAP);
|
|
|
|
/* Init RxBD ring */
|
|
bd = (qe_bd_t *)uec->p_rx_bd_ring;
|
|
uec->rxBd = bd;
|
|
buf = uec->p_rx_buf;
|
|
for (i = 0; i < uec_info->rx_bd_ring_len; i++) {
|
|
BD_DATA_SET(bd, buf);
|
|
BD_LENGTH_SET(bd, 0);
|
|
BD_STATUS_SET(bd, RxBD_EMPTY);
|
|
buf += MAX_RXBUF_LEN;
|
|
bd ++;
|
|
}
|
|
BD_STATUS_SET((--bd), RxBD_WRAP | RxBD_EMPTY);
|
|
|
|
/* Init global Tx parameter RAM */
|
|
uec_init_tx_parameter(uec, num_threads_tx);
|
|
|
|
/* Init global Rx parameter RAM */
|
|
uec_init_rx_parameter(uec, num_threads_rx);
|
|
|
|
/* Init ethernet Tx and Rx parameter command */
|
|
if (uec_issue_init_enet_rxtx_cmd(uec, num_threads_tx,
|
|
num_threads_rx)) {
|
|
printf("%s issue init enet cmd failed\n", __FUNCTION__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int uec_init(struct eth_device* dev, bd_t *bd)
|
|
{
|
|
uec_private_t *uec;
|
|
int err;
|
|
|
|
uec = (uec_private_t *)dev->priv;
|
|
|
|
if (uec->the_first_run == 0) {
|
|
/* Set up the MAC address */
|
|
if (dev->enetaddr[0] & 0x01) {
|
|
printf("%s: MacAddress is multcast address\n",
|
|
__FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
uec_set_mac_address(uec, dev->enetaddr);
|
|
uec->the_first_run = 1;
|
|
}
|
|
|
|
err = uec_open(uec, COMM_DIR_RX_AND_TX);
|
|
if (err) {
|
|
printf("%s: cannot enable UEC device\n", dev->name);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void uec_halt(struct eth_device* dev)
|
|
{
|
|
uec_private_t *uec = (uec_private_t *)dev->priv;
|
|
uec_stop(uec, COMM_DIR_RX_AND_TX);
|
|
}
|
|
|
|
static int uec_send(struct eth_device* dev, volatile void *buf, int len)
|
|
{
|
|
uec_private_t *uec;
|
|
ucc_fast_private_t *uccf;
|
|
volatile qe_bd_t *bd;
|
|
u16 status;
|
|
int i;
|
|
int result = 0;
|
|
|
|
uec = (uec_private_t *)dev->priv;
|
|
uccf = uec->uccf;
|
|
bd = uec->txBd;
|
|
|
|
/* Find an empty TxBD */
|
|
for (i = 0; bd->status & TxBD_READY; i++) {
|
|
if (i > 0x100000) {
|
|
printf("%s: tx buffer not ready\n", dev->name);
|
|
return result;
|
|
}
|
|
}
|
|
|
|
/* Init TxBD */
|
|
BD_DATA_SET(bd, buf);
|
|
BD_LENGTH_SET(bd, len);
|
|
status = bd->status;
|
|
status &= BD_WRAP;
|
|
status |= (TxBD_READY | TxBD_LAST);
|
|
BD_STATUS_SET(bd, status);
|
|
|
|
/* Tell UCC to transmit the buffer */
|
|
ucc_fast_transmit_on_demand(uccf);
|
|
|
|
/* Wait for buffer to be transmitted */
|
|
for (i = 0; bd->status & TxBD_READY; i++) {
|
|
if (i > 0x100000) {
|
|
printf("%s: tx error\n", dev->name);
|
|
return result;
|
|
}
|
|
}
|
|
|
|
/* Ok, the buffer be transimitted */
|
|
BD_ADVANCE(bd, status, uec->p_tx_bd_ring);
|
|
uec->txBd = bd;
|
|
result = 1;
|
|
|
|
return result;
|
|
}
|
|
|
|
static int uec_recv(struct eth_device* dev)
|
|
{
|
|
uec_private_t *uec = dev->priv;
|
|
volatile qe_bd_t *bd;
|
|
u16 status;
|
|
u16 len;
|
|
u8 *data;
|
|
|
|
bd = uec->rxBd;
|
|
status = bd->status;
|
|
|
|
while (!(status & RxBD_EMPTY)) {
|
|
if (!(status & RxBD_ERROR)) {
|
|
data = BD_DATA(bd);
|
|
len = BD_LENGTH(bd);
|
|
NetReceive(data, len);
|
|
} else {
|
|
printf("%s: Rx error\n", dev->name);
|
|
}
|
|
status &= BD_CLEAN;
|
|
BD_LENGTH_SET(bd, 0);
|
|
BD_STATUS_SET(bd, status | RxBD_EMPTY);
|
|
BD_ADVANCE(bd, status, uec->p_rx_bd_ring);
|
|
status = bd->status;
|
|
}
|
|
uec->rxBd = bd;
|
|
|
|
return 1;
|
|
}
|
|
|
|
int uec_initialize(int index)
|
|
{
|
|
struct eth_device *dev;
|
|
int i;
|
|
uec_private_t *uec;
|
|
uec_info_t *uec_info;
|
|
int err;
|
|
|
|
dev = (struct eth_device *)malloc(sizeof(struct eth_device));
|
|
if (!dev)
|
|
return 0;
|
|
memset(dev, 0, sizeof(struct eth_device));
|
|
|
|
/* Allocate the UEC private struct */
|
|
uec = (uec_private_t *)malloc(sizeof(uec_private_t));
|
|
if (!uec) {
|
|
return -ENOMEM;
|
|
}
|
|
memset(uec, 0, sizeof(uec_private_t));
|
|
|
|
/* Init UEC private struct, they come from board.h */
|
|
if (index == 0) {
|
|
#ifdef CONFIG_UEC_ETH1
|
|
uec_info = ð1_uec_info;
|
|
#endif
|
|
} else if (index == 1) {
|
|
#ifdef CONFIG_UEC_ETH2
|
|
uec_info = ð2_uec_info;
|
|
#endif
|
|
} else {
|
|
printf("%s: index is illegal.\n", __FUNCTION__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
uec->uec_info = uec_info;
|
|
|
|
sprintf(dev->name, "FSL UEC%d", index);
|
|
dev->iobase = 0;
|
|
dev->priv = (void *)uec;
|
|
dev->init = uec_init;
|
|
dev->halt = uec_halt;
|
|
dev->send = uec_send;
|
|
dev->recv = uec_recv;
|
|
|
|
/* Clear the ethnet address */
|
|
for (i = 0; i < 6; i++)
|
|
dev->enetaddr[i] = 0;
|
|
|
|
eth_register(dev);
|
|
|
|
err = uec_startup(uec);
|
|
if (err) {
|
|
printf("%s: Cannot configure net device, aborting.",dev->name);
|
|
return err;
|
|
}
|
|
|
|
err = init_phy(dev);
|
|
if (err) {
|
|
printf("%s: Cannot initialize PHY, aborting.\n", dev->name);
|
|
return err;
|
|
}
|
|
|
|
phy_change(dev);
|
|
|
|
return 1;
|
|
}
|
|
#endif /* CONFIG_QE */
|
|
|