upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/LaCie/netspace_v2/netspace_v2.c

117 lines
2.7 KiB

/*
* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
*
* Based on Kirkwood support:
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <command.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
#include <asm/arch/gpio.h>
#include "netspace_v2.h"
#include "../common/common.h"
DECLARE_GLOBAL_DATA_PTR;
int board_early_init_f(void)
{
/* Gpio configuration */
kw_config_gpio(NETSPACE_V2_OE_VAL_LOW, NETSPACE_V2_OE_VAL_HIGH,
NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH);
/* Multi-Purpose Pins Functionality configuration */
static const u32 kwmpp_config[] = {
MPP0_SPI_SCn,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
MPP4_NF_IO6,
MPP5_NF_IO7,
MPP6_SYSRST_OUTn,
MPP7_GPO, /* Fan speed (bit 1) */
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP11_UART0_RXD,
MPP12_GPO, /* Red led */
MPP14_GPIO, /* USB fuse */
MPP16_GPIO, /* SATA 0 power */
MPP17_GPIO, /* SATA 1 power */
MPP18_NF_IO0,
MPP19_NF_IO1,
MPP20_SATA1_ACTn,
MPP21_SATA0_ACTn,
MPP22_GPIO, /* Fan speed (bit 0) */
MPP23_GPIO, /* Fan power */
MPP24_GPIO, /* USB mode select */
MPP25_GPIO, /* Fan rotation fail */
MPP26_GPIO, /* USB vbus-in detection */
MPP28_GPIO, /* USB enable vbus-out */
MPP29_GPIO, /* Blue led (slow register) */
MPP30_GPIO, /* Blue led (command register) */
MPP31_GPIO, /* Board power off */
MPP32_GPIO, /* Button (0 = Released, 1 = Pushed) */
MPP33_GPIO, /* Fan speed (bit 2) */
0
};
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
int board_init(void)
{
/* Machine number */
gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
/* Boot parameters address */
gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
return 0;
}
#if defined(CONFIG_MISC_INIT_R)
int misc_init_r(void)
{
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
if (!getenv("ethaddr")) {
uchar mac[6];
if (lacie_read_mac_address(mac) == 0)
eth_setenv_enetaddr("ethaddr", mac);
}
#endif
return 0;
}
#endif
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
/* Configure and initialize PHY */
void reset_phy(void)
{
#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
mv_phy_88e1318_init("egiga0", 0);
#else
mv_phy_88e1116_init("egiga0", 8);
#endif
}
#endif
#if defined(CONFIG_KIRKWOOD_GPIO)
/* Return GPIO button status */
static int
do_read_button(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
return kw_gpio_get_value(NETSPACE_V2_GPIO_BUTTON);
}
U_BOOT_CMD(button, 1, 1, do_read_button,
"Return GPIO button status 0=off 1=on", "");
#endif