upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/ram/stm32mp1/stm32mp1_ram.c

197 lines
4.5 KiB

/*
* Copyright (C) 2018, STMicroelectronics - All Rights Reserved
*
* SPDX-License-Identifier: GPL-2.0+ BSD-3-Clause
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <ram.h>
#include <regmap.h>
#include <syscon.h>
#include <asm/io.h>
#include "stm32mp1_ddr.h"
DECLARE_GLOBAL_DATA_PTR;
static const char *const clkname[] = {
"ddrc1",
"ddrc2",
"ddrcapb",
"ddrphycapb",
"ddrphyc" /* LAST clock => used for get_rate() */
};
int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint16_t mem_speed)
{
unsigned long ddrphy_clk;
unsigned long ddr_clk;
struct clk clk;
int ret;
int idx;
for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) {
ret = clk_get_by_name(priv->dev, clkname[idx], &clk);
if (!ret)
ret = clk_enable(&clk);
if (ret) {
printf("error for %s : %d\n", clkname[idx], ret);
return ret;
}
}
priv->clk = clk;
ddrphy_clk = clk_get_rate(&priv->clk);
debug("DDR: mem_speed (%d MHz), RCC %d MHz\n",
mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
/* max 10% frequency delta */
ddr_clk = abs(ddrphy_clk - mem_speed * 1000 * 1000);
if (ddr_clk > (mem_speed * 1000 * 100)) {
pr_err("DDR expected freq %d MHz, current is %d MHz\n",
mem_speed, (u32)(ddrphy_clk / 1000 / 1000));
return -EINVAL;
}
return 0;
}
static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)
{
struct ddr_info *priv = dev_get_priv(dev);
int ret, idx;
struct clk axidcg;
struct stm32mp1_ddr_config config;
#define PARAM(x, y) \
{ x,\
offsetof(struct stm32mp1_ddr_config, y),\
sizeof(config.y) / sizeof(u32)}
#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x)
#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x)
const struct {
const char *name; /* name in DT */
const u32 offset; /* offset in config struct */
const u32 size; /* size of parameters */
} param[] = {
CTL_PARAM(reg),
CTL_PARAM(timing),
CTL_PARAM(map),
CTL_PARAM(perf),
PHY_PARAM(reg),
PHY_PARAM(timing),
PHY_PARAM(cal)
};
config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0);
config.info.size = dev_read_u32_default(dev, "st,mem-size", 0);
config.info.name = dev_read_string(dev, "st,mem-name");
if (!config.info.name) {
debug("%s: no st,mem-name\n", __func__);
return -EINVAL;
}
printf("RAM: %s\n", config.info.name);
for (idx = 0; idx < ARRAY_SIZE(param); idx++) {
ret = dev_read_u32_array(dev, param[idx].name,
(void *)((u32)&config +
param[idx].offset),
param[idx].size);
debug("%s: %s[0x%x] = %d\n", __func__,
param[idx].name, param[idx].size, ret);
if (ret) {
pr_err("%s: Cannot read %s\n",
__func__, param[idx].name);
return -EINVAL;
}
}
ret = clk_get_by_name(dev, "axidcg", &axidcg);
if (ret) {
debug("%s: Cannot found axidcg\n", __func__);
return -EINVAL;
}
clk_disable(&axidcg); /* disable clock gating during init */
stm32mp1_ddr_init(priv, &config);
clk_enable(&axidcg); /* enable clock gating */
/* check size */
debug("%s : get_ram_size(%x, %x)\n", __func__,
(u32)priv->info.base, (u32)STM32_DDR_SIZE);
priv->info.size = get_ram_size((long *)priv->info.base,
STM32_DDR_SIZE);
debug("%s : %x\n", __func__, (u32)priv->info.size);
/* check memory access for all memory */
if (config.info.size != priv->info.size) {
printf("DDR invalid size : 0x%x, expected 0x%x\n",
priv->info.size, config.info.size);
return -EINVAL;
}
return 0;
}
static int stm32mp1_ddr_probe(struct udevice *dev)
{
struct ddr_info *priv = dev_get_priv(dev);
struct regmap *map;
int ret;
debug("STM32MP1 DDR probe\n");
priv->dev = dev;
ret = regmap_init_mem(dev, &map);
if (ret)
return ret;
priv->ctl = regmap_get_range(map, 0);
priv->phy = regmap_get_range(map, 1);
priv->rcc = STM32_RCC_BASE;
priv->info.base = STM32_DDR_BASE;
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
priv->info.size = 0;
return stm32mp1_ddr_setup(dev);
#else
priv->info.size = dev_read_u32_default(dev, "st,mem-size", 0);
return 0;
#endif
}
static int stm32mp1_ddr_get_info(struct udevice *dev, struct ram_info *info)
{
struct ddr_info *priv = dev_get_priv(dev);
*info = priv->info;
return 0;
}
static struct ram_ops stm32mp1_ddr_ops = {
.get_info = stm32mp1_ddr_get_info,
};
static const struct udevice_id stm32mp1_ddr_ids[] = {
{ .compatible = "st,stm32mp1-ddr" },
{ }
};
U_BOOT_DRIVER(ddr_stm32mp1) = {
.name = "stm32mp1_ddr",
.id = UCLASS_RAM,
.of_match = stm32mp1_ddr_ids,
.ops = &stm32mp1_ddr_ops,
.probe = stm32mp1_ddr_probe,
.priv_auto_alloc_size = sizeof(struct ddr_info),
};