upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
156 lines
4.6 KiB
156 lines
4.6 KiB
/*
|
|
* (C) Copyright 2002
|
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
|
*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <da9030.h>
|
|
#include <asm/arch/pxa-regs.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static void init_DA9030(void);
|
|
|
|
/*
|
|
* Miscelaneous platform dependent initialisations
|
|
*/
|
|
|
|
int board_init (void)
|
|
{
|
|
/* memory and cpu-speed are setup before relocation */
|
|
/* so we do _nothing_ here */
|
|
|
|
/* arch number of Lubbock-Board mk@tbd: fix this! */
|
|
gd->bd->bi_arch_number = MACH_TYPE_LUBBOCK;
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = 0xa0000100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_late_init(void)
|
|
{
|
|
setenv("stdout", "serial");
|
|
setenv("stderr", "serial");
|
|
init_DA9030();
|
|
return 0;
|
|
}
|
|
|
|
|
|
int dram_init (void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
|
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
|
|
gd->bd->bi_dram[2].start = PHYS_SDRAM_3;
|
|
gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE;
|
|
gd->bd->bi_dram[3].start = PHYS_SDRAM_4;
|
|
gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void i2c_init_board()
|
|
{
|
|
CKENB |= (CKENB_4_I2C);
|
|
|
|
/* setup I2C GPIO's */
|
|
GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */
|
|
GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */
|
|
}
|
|
|
|
/* initialize the DA9030 Power Controller */
|
|
static void init_DA9030()
|
|
{
|
|
uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
|
|
|
|
CKENB |= CKENB_7_GPIO;
|
|
udelay(100);
|
|
|
|
/* Rising Edge on EXTON to reset DA9030 */
|
|
GPIO17 = 0x8800; /* configure GPIO17, no pullup, -down */
|
|
GPDR0 |= (1<<17); /* GPIO17 is output */
|
|
GSDR0 = (1<<17);
|
|
GPCR0 = (1<<17); /* drive GPIO17 low */
|
|
GPSR0 = (1<<17); /* drive GPIO17 high */
|
|
|
|
#if CFG_DA9030_EXTON_DELAY
|
|
udelay((unsigned long) CFG_DA9030_EXTON_DELAY); /* wait for DA9030 */
|
|
#endif
|
|
GPCR0 = (1<<17); /* drive GPIO17 low */
|
|
|
|
/* reset the watchdog and go active (0xec) */
|
|
val = (SYS_CONTROL_A_HWRES_ENABLE |
|
|
(0x6<<4) |
|
|
SYS_CONTROL_A_WDOG_ACTION |
|
|
SYS_CONTROL_A_WATCHDOG);
|
|
if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) {
|
|
printf("Error accessing DA9030 via i2c.\n");
|
|
return;
|
|
}
|
|
|
|
i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
|
|
i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */
|
|
i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */
|
|
i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */
|
|
i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */
|
|
i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */
|
|
i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */
|
|
i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */
|
|
i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */
|
|
i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */
|
|
i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */
|
|
i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */
|
|
i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */
|
|
i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */
|
|
i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */
|
|
i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */
|
|
i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */
|
|
|
|
val = i2c_reg_read(addr, STATUS);
|
|
if(val & STATUS_CHDET)
|
|
printf("Charger detected, turning on LED.\n");
|
|
else {
|
|
printf("No charger detetected.\n");
|
|
/* undervoltage? print error and power down */
|
|
}
|
|
}
|
|
|
|
|
|
#if 0
|
|
/* reset the DA9030 watchdog */
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
uchar addr = (uchar) DA9030_I2C_ADDR, val = 0;
|
|
val = i2c_reg_read(addr, SYS_CONTROL_A);
|
|
val |= SYS_CONTROL_A_WATCHDOG;
|
|
i2c_reg_write(addr, SYS_CONTROL_A, val);
|
|
}
|
|
#endif
|
|
|