upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/freescale/mpc8641hpcn/ddr.c

167 lines
4.5 KiB

/*
* Copyright 2008 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* Version 2 as published by the Free Software Foundation.
*/
#include <common.h>
#include <i2c.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_ddr_dimm_params.h>
static void
get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address)
{
i2c_read(i2c_address, 0, 1, (uchar *)spd, sizeof(ddr2_spd_eeprom_t));
}
unsigned int fsl_ddr_get_mem_data_rate(void)
{
return get_bus_freq(0);
}
void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd,
unsigned int ctrl_num)
{
unsigned int i;
unsigned int i2c_address = 0;
for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) {
if (ctrl_num == 0 && i == 0) {
i2c_address = SPD_EEPROM_ADDRESS1;
}
if (ctrl_num == 0 && i == 1) {
i2c_address = SPD_EEPROM_ADDRESS2;
}
if (ctrl_num == 1 && i == 0) {
i2c_address = SPD_EEPROM_ADDRESS3;
}
if (ctrl_num == 1 && i == 1) {
i2c_address = SPD_EEPROM_ADDRESS4;
}
get_spd(&(ctrl_dimms_spd[i]), i2c_address);
}
}
typedef struct {
u32 datarate_mhz_low;
u32 datarate_mhz_high;
u32 n_ranks;
u32 clk_adjust;
u32 cpo;
u32 write_data_delay;
} board_specific_parameters_t;
/* XXX: these values need to be checked for all interleaving modes. */
const board_specific_parameters_t board_specific_parameters[2][16] = {
{
/* memory controller 0 */
/* lo| hi| num| clk| cpo|wrdata */
/* mhz| mhz|ranks|adjst| | delay */
{ 0, 333, 4, 7, 7, 3},
{334, 400, 4, 7, 9, 3},
{401, 549, 4, 7, 9, 3},
{550, 650, 4, 7, 10, 4},
{ 0, 333, 3, 7, 7, 3},
{334, 400, 3, 7, 9, 3},
{401, 549, 3, 7, 9, 3},
{550, 650, 3, 7, 10, 4},
{ 0, 333, 2, 7, 7, 3},
{334, 400, 2, 7, 9, 3},
{401, 549, 2, 7, 9, 3},
{550, 650, 2, 7, 10, 4},
{ 0, 333, 1, 7, 7, 3},
{334, 400, 1, 7, 9, 3},
{401, 549, 1, 7, 9, 3},
{550, 650, 1, 7, 10, 4}
},
{
/* memory controller 1 */
/* lo| hi| num| clk| cpo|wrdata */
/* mhz| mhz|ranks|adjst| | delay */
{ 0, 333, 4, 7, 7, 3},
{334, 400, 4, 7, 9, 3},
{401, 549, 4, 7, 9, 3},
{550, 650, 4, 7, 10, 4},
{ 0, 333, 3, 7, 7, 3},
{334, 400, 3, 7, 9, 3},
{401, 549, 3, 7, 9, 3},
{550, 650, 3, 7, 10, 4},
{ 0, 333, 2, 7, 7, 3},
{334, 400, 2, 7, 9, 3},
{401, 549, 2, 7, 9, 3},
{550, 650, 2, 7, 10, 4},
{ 0, 333, 1, 7, 7, 3},
{334, 400, 1, 7, 9, 3},
{401, 549, 1, 7, 9, 3},
{550, 650, 1, 7, 10, 4}
}
};
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
unsigned int ctrl_num)
{
const board_specific_parameters_t *pbsp =
&(board_specific_parameters[ctrl_num][0]);
u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
sizeof(board_specific_parameters[0][0]);
u32 i;
u32 j;
ulong ddr_freq;
/* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
* that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
* there are two dimms in the controller, set odt_rd_cfg to 3 and
* odt_wr_cfg to 3 for the even CS, 0 for the odd CS.
*/
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
if (i&1) { /* odd CS */
popts->cs_local_opts[i].odt_rd_cfg = 0;
popts->cs_local_opts[i].odt_wr_cfg = 0;
} else { /* even CS */
if ((CONFIG_DIMM_SLOTS_PER_CTLR == 2) &&
(pdimm[i/2].n_ranks != 0)) {
popts->cs_local_opts[i].odt_rd_cfg = 3;
popts->cs_local_opts[i].odt_wr_cfg = 3;
} else {
popts->cs_local_opts[i].odt_rd_cfg = 0;
popts->cs_local_opts[i].odt_wr_cfg = 4;
}
}
}
/* Get clk_adjust, cpo, write_data_delay, according to the board ddr
* freqency and n_banks specified in board_specific_parameters table.
*/
ddr_freq = fsl_ddr_get_mem_data_rate() / 1000000;
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
if (pdimm[j].n_ranks > 0) {
for (i = 0; i < num_params; i++) {
if (ddr_freq >= pbsp->datarate_mhz_low &&
ddr_freq <= pbsp->datarate_mhz_high &&
pdimm[j].n_ranks == pbsp->n_ranks) {
popts->clk_adjust = pbsp->clk_adjust;
popts->cpo_override = pbsp->cpo;
popts->write_data_delay =
pbsp->write_data_delay;
break;
}
pbsp++;
}
}
}
/* 2T timing enable */
popts->twoT_en = 1;
}