upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Bin Meng
a187559e3d
|
9 years ago | |
|---|---|---|
| .. | ||
| .gitignore | 11 years ago | |
| Makefile | 9 years ago | |
| README.smc91111_eeprom | 9 years ago | |
| atmel_df_pow2.c | ||
| hello_world.c | 12 years ago | |
| interrupt.c | 12 years ago | |
| mem_to_mem_idma2intr.c | 9 years ago | |
| mips.lds | 12 years ago | |
| mips64.lds | 12 years ago | |
| nds32.lds | 12 years ago | |
| ppc_longjmp.S | 12 years ago | |
| ppc_setjmp.S | 12 years ago | |
| sched.c | 12 years ago | |
| smc911x_eeprom.c | 9 years ago | |
| smc91111_eeprom.c | 9 years ago | |
| sparc.lds | 12 years ago | |
| stubs.c | 10 years ago | |
| test_burst.c | 10 years ago | |
| test_burst.h | 12 years ago | |
| test_burst_lib.S | 12 years ago | |
| timer.c | 12 years ago | |
README.smc91111_eeprom
This is the readme for the Das U-Boot standalone program smc91111
The main purpose of this is to manage MAC addresses on platforms
which include the SMC91111 integrated 10/100 MAC Phy, with attached
EEPROMs.
Contents:
------------------------
1. Ensuring U-Boot's MAC address can be set in hardware
2. Running the smc91111_eeprom program
3. Setting MAC addresses
4. Other things you can do with this
5. Things to be done.
1. Ensuring U-Boot's MAC address can be set in hardware
--------------------------------------------------------------------------
On the Internet - MAC addresses are very important. Short for Media
Access Control address, a hardware address that uniquely identifies
each node of a network. When things are not unique - bad things
can happen. This is why U-Boot makes it difficult to change MAC
addresses.
To find out who has a MAC address, or to purchase MAC addresses, goto
the IEEE, at:
http://standards.ieee.org/regauth/oui/index.shtml
2. Running the smc91111_eeprom program
---------------------------------------------------------------------
After Uboot is compiled, there should be three files of interest:
-rwxr-xr-x 1 8806 2004-10-11 14:00 smc91111_eeprom <- ELF
-rwxr-xr-x 1 3440 2004-10-11 14:00 smc91111_eeprom.bin <- BIN
-rwxr-xr-x 1 9524 2004-10-11 14:00 smc91111_eeprom.srec <- SREC
if there is not, check the examples/Makefile, and ensure there is something
like for your architecture:
ifeq ($(ARCH),blackfin)
SREC += smc91111_eeprom.srec
BIN += smc91111_eeprom.bin smc91111_eeprom
endif
To load the files: there are two methods: a) serial or b) network. Since
it is not a good idea to start doing things on the network before the
MAC address is set, this example will do things over serial.
a) Loading the elf file via the serial port
--------------------------------------------
Loading the elf is very easy - just ensure that the location
you specify things to load as is not the load address specified
in the Makefile.
BOOT> loadb 0x1000000
## Ready for binary (kermit) download to 0x01000000 at 57600 bps...
(type CNTL-\ then C)
(Back at local machine)
----------------------------------------------------
Kermit>send ~/u-boot_1.1.1/examples/smc91111_eeprom
Kermit>connect
Connecting to /dev/ttyS0, speed 57600
Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------
## Total Size = 0x00002266 = 8806 Bytes
## Start Addr = 0x01000000
BOOT> bootelf 0x1000000
Loading .text @ 0x00001000 (3440 bytes)
## Starting application at 0x000010d8 ...
SMC91111>
b) Loading the binary file via the serial port
-----------------------------------------------
For many toolchains, the entry point is not the load point.
The Load point is a hard coded address from the
examples/Makefile. The entry point can be found by doing something
like:
u-boot_1.1.1/examples> bfin-elf-objdump -d smc91111_eeprom |less
smc91111_eeprom: file format elf32-bfin
Disassembly of section .text:
00001000 <smc91111_eeprom-0xd8>:
1000:
000010d8 <smc91111_eeprom>:
You can see that the entry point (or the address that should be
jumped to is 0x10d8). This is also the same as the entry point
of the elf file.
Now we load it to the actual load location:
BOOT> loadb 0x1000
## Ready for binary (kermit) download to 0x00001000 at 57600 bps...
(Back at pinky.dsl-only.net)
----------------------------------------------------
Kermit>send /tftpboot/eeprom.bin
Kermit>connect
Connecting to /dev/ttyS0, speed 57600
Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------
## Total Size = 0x00000d70 = 3440 Bytes
## Start Addr = 0x00001000
BOOT> go 0x10D8
## Starting application at 0x000010D8 ...
SMC91111>
3. Setting MAC addresses
--------------------------------------------------------------------------
The MAC address can be stored in four locations:
-Boot environmental variable in Flash <- can not change, without
re-flashing U-Boot.
U-Boot environmental variable <- can not change, without
resetting board/U-Boot
LAN91C111 Registers <- volatile
LAN91C111 EEPROM <- Non-volatile
If you have not activated the network, and do not have a hardcoded
or pre-assigned MAC address in U-Boot, the environmental variables
should be blank, and allow you to set things one time.
To set the EEPROM MAC address to 12:34:56:78:9A:BC
SMC91111> W E 20 3412
Writing EEPROM register 20 with 3412
SMC91111> W E 21 7856
Writing EEPROM register 21 with 7856
SMC91111> W E 22 BC9A
Writing EEPROM register 22 with bc9a
EEPROM contents copied to MAC
SMC91111> P
Current MAC Address in SMSC91111 12:34:56:78:9a:bc
Current MAC Address in EEPROM 12:34:56:78:9a:bc
(CNTRL-C to exit)
SMC91111> ## Application terminated, rc = 0x0
BOOT> reset
U-Boot 1.1.1 (gcc version: 3.3.3)
Release Version Beta released on Oct 10 2004 - 00:34:35
Blackfin support by LG Soft India
For further information please check this link http://www.blackfin.uclinux.org
BOOT> ping 192.168.0.4
Using MAC Address 12:34:56:78:9A:BC
host 192.168.0.4 is alive
4. Other things that you can do
--------------------------------------------------------------------------
After the stand alone application is running, there are a few options:
- P : Print the MAC
- D : Dump the LAN91C111 EEPROM contents
- M : Dump the LAN91C111 MAC contents
- C : Copies the MAC address from the EEPROM to the LAN91C111
- W : Write a register in the EEPROM or in the MAC
SMC91111> P
Current MAC Address in SMSC91111 12:34:56:78:9a:bc
Current MAC Address in EEPROM 12:34:56:78:9a:bc
SMC91111> D
IOS2-0 000 001 002 003 004 005 006 007
CONFIG 00:ffff 04:ffff 08:ffff 0c:ffff 10:ffff 14:ffff 18:ffff 1c:ffff
BASE 01:ffff 05:ffff 09:ffff 0d:ffff 11:ffff 15:ffff 19:ffff 1d:ffff
02:ffff 06:ffff 0a:ffff 0e:0020 12:ffff 16:ffff 1a:ffff 1e:ffff
03:ffff 07:ffff 0b:ffff 0f:ffff 13:ffff 17:ffff 1b:ffff 1f:ffff
20:3412 21:7856 22:bc9a 23:ffff 24:ffff 25:ffff 26:ffff 27:ffff
28:ffff 29:ffff 2a:ffff 2b:ffff 2c:ffff 2d:ffff 2e:ffff 2f:ffff
30:ffff 31:ffff 32:ffff 33:ffff 34:ffff 35:ffff 36:ffff 37:ffff
38:ffff 39:ffff 3a:ffff 3b:ffff 3c:ffff 3d:ffff 3e:ffff 3f:ffff
SMC91111> M
Bank0 Bank1 Bank2 Bank3
00 0000 a0b1 3332 0000
02 0000 1801 8000 0000
04 0000 3412 8080 0000
06 0000 7856 003f 0000
08 0404 bc9a 02df 3332
0a 0000 ffff 02df 3391
0c 0000 1214 0004 001f
0e 3300 3301 3302 3303
SMC91111> C
EEPROM contents copied to MAC
SMC91111> W E 2A ABCD
Writing EEPROM register 2a with abcd
SMC91111> W M 14 FF00
Writing MAC register bank 1, reg 04 with ff00