upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/drivers/usb/host/ehci-exynos.c

118 lines
3.0 KiB

/*
* SAMSUNG EXYNOS USB HOST EHCI Controller
*
* Copyright (C) 2012 Samsung Electronics Co.Ltd
* Vivek Gautam <gautam.vivek@samsung.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <common.h>
#include <usb.h>
#include <asm/arch/cpu.h>
#include <asm/arch/ehci.h>
#include <asm/arch/system.h>
#include <asm/arch/power.h>
#include "ehci.h"
#include "ehci-core.h"
/* Setup the EHCI host controller. */
static void setup_usb_phy(struct exynos_usb_phy *usb)
{
set_usbhost_mode(USB20_PHY_CFG_HOST_LINK_EN);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_EN);
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_FSEL_MASK |
HOST_CTRL0_COMMONON_N |
/* HOST Phy setting */
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
setbits_le32(&usb->usbphyctrl0,
/* Setting up the ref freq */
(CLK_24MHZ << 16) |
/* HOST Phy setting */
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
udelay(10);
clrbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
udelay(20);
/* EHCI Ctrl setting */
setbits_le32(&usb->ehcictrl,
EHCICTRL_ENAINCRXALIGN |
EHCICTRL_ENAINCR4 |
EHCICTRL_ENAINCR8 |
EHCICTRL_ENAINCR16);
}
/* Reset the EHCI host controller. */
static void reset_usb_phy(struct exynos_usb_phy *usb)
{
/* HOST_PHY reset */
setbits_le32(&usb->usbphyctrl0,
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
set_usbhost_phy_ctrl(POWER_USB_HOST_PHY_CTRL_DISABLE);
}
/*
* EHCI-initialization
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
int ehci_hcd_init(void)
{
struct exynos_usb_phy *usb;
usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
setup_usb_phy(usb);
hccr = (struct ehci_hccr *)samsung_get_base_usb_ehci();
hcor = (struct ehci_hcor *)((uint32_t) hccr
+ HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
debug("Exynos5-ehci: init hccr %x and hcor %x hc_length %d\n",
(uint32_t)hccr, (uint32_t)hcor,
(uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the EHCI host controller.
*/
int ehci_hcd_stop()
{
struct exynos_usb_phy *usb;
usb = (struct exynos_usb_phy *)samsung_get_base_usb_phy();
reset_usb_phy(usb);
return 0;
}