upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
598 lines
17 KiB
598 lines
17 KiB
#!/bin/bash
|
|
#
|
|
# (C) Copyright 2014 Suriyan Ramasami
|
|
#
|
|
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
|
|
# Invoke this test script from U-Boot base directory as ./test/fs/fs-test.sh
|
|
# It currently tests the fs/sb and native commands for ext4 and fat partitions
|
|
# Expected results are as follows:
|
|
# EXT4 tests:
|
|
# fs-test.sb.ext4.out: Summary: PASS: 23 FAIL: 0
|
|
# fs-test.ext4.out: Summary: PASS: 23 FAIL: 0
|
|
# fs-test.fs.ext4.out: Summary: PASS: 23 FAIL: 0
|
|
# FAT tests:
|
|
# fs-test.sb.fat.out: Summary: PASS: 23 FAIL: 0
|
|
# fs-test.fat.out: Summary: PASS: 20 FAIL: 3
|
|
# fs-test.fs.fat.out: Summary: PASS: 20 FAIL: 3
|
|
# Total Summary: TOTAL PASS: 132 TOTAL FAIL: 6
|
|
|
|
# pre-requisite binaries list.
|
|
PREREQ_BINS="md5sum mkfs mount umount dd fallocate mkdir"
|
|
|
|
# All generated output files from this test will be in $OUT_DIR
|
|
# Hence everything is sandboxed.
|
|
OUT_DIR="sandbox/test/fs"
|
|
|
|
# Location of generated sandbox u-boot
|
|
UBOOT="./sandbox/u-boot"
|
|
|
|
# Our mount directory will be in the sandbox
|
|
MOUNT_DIR="${OUT_DIR}/mnt"
|
|
|
|
# The file system image we create will have the $IMG prefix.
|
|
IMG="${OUT_DIR}/3GB"
|
|
|
|
# $SMALL_FILE is the name of the 1MB file in the file system image
|
|
SMALL_FILE="1MB.file"
|
|
|
|
# $BIG_FILE is the name of the 2.5GB file in the file system image
|
|
BIG_FILE="2.5GB.file"
|
|
|
|
# $MD5_FILE will have the expected md5s when we do the test
|
|
# They shall have a suffix which represents their file system (ext4/fat)
|
|
MD5_FILE="${OUT_DIR}/md5s.list"
|
|
|
|
# $OUT shall be the prefix of the test output. Their suffix will be .out
|
|
OUT="${OUT_DIR}/fs-test"
|
|
|
|
# Full Path of the 1 MB file that shall be created in the fs image.
|
|
MB1="${MOUNT_DIR}/${SMALL_FILE}"
|
|
GB2p5="${MOUNT_DIR}/${BIG_FILE}"
|
|
|
|
# ************************
|
|
# * Functions start here *
|
|
# ************************
|
|
|
|
# Check if the prereq binaries exist, or exit
|
|
function check_prereq() {
|
|
for prereq in $PREREQ_BINS; do
|
|
if [ ! -x "`which $prereq`" ]; then
|
|
echo "Missing $prereq binary. Exiting!"
|
|
exit
|
|
fi
|
|
done
|
|
|
|
# We use /dev/urandom to create files. Check if it exists.
|
|
if [ ! -c /dev/urandom ]; then
|
|
echo "Missing character special /dev/urandom. Exiting!"
|
|
exit
|
|
fi
|
|
}
|
|
|
|
# If 1st param is "clean", then clean out the generated files and exit
|
|
function check_clean() {
|
|
if [ "$1" = "clean" ]; then
|
|
rm -rf "$OUT_DIR"
|
|
echo "Cleaned up generated files. Exiting"
|
|
exit
|
|
fi
|
|
}
|
|
|
|
# Generate sandbox U-Boot - gleaned from /test/dm/test-dm.sh
|
|
function compile_sandbox() {
|
|
unset CROSS_COMPILE
|
|
NUM_CPUS=$(cat /proc/cpuinfo |grep -c processor)
|
|
make O=sandbox sandbox_config
|
|
make O=sandbox -s -j${NUM_CPUS}
|
|
|
|
# Check if U-Boot exists
|
|
if [ ! -x "$UBOOT" ]; then
|
|
echo "$UBOOT does not exist or is not executable"
|
|
echo "Build error?"
|
|
echo "Please run this script as ./test/fs/`basename $0`"
|
|
exit
|
|
fi
|
|
}
|
|
|
|
# Clean out all generated files other than the file system images
|
|
# We save time by not deleting and recreating the file system images
|
|
function prepare_env() {
|
|
rm -f ${MD5_FILE}.* ${OUT}.*
|
|
mkdir -p ${OUT_DIR}
|
|
}
|
|
|
|
# 1st parameter is the name of the image file to be created
|
|
# 2nd parameter is the filesystem - fat ext4 etc
|
|
# -F cant be used with fat as it means something else.
|
|
function create_image() {
|
|
# Create image if not already present - saves time, while debugging
|
|
if [ "$2" = "ext4" ]; then
|
|
MKFS_OPTION="-F"
|
|
else
|
|
MKFS_OPTION=""
|
|
fi
|
|
if [ ! -f "$1" ]; then
|
|
fallocate -l 3G "$1" &> /dev/null
|
|
if [ $? -ne 0 ]; then
|
|
echo fallocate failed - using dd instead
|
|
dd if=/dev/zero of=$1 bs=1024 count=$((3 * 1024 * 1024))
|
|
if [ $? -ne 0 ]; then
|
|
echo Could not create empty disk image
|
|
exit $?
|
|
fi
|
|
fi
|
|
mkfs -t "$2" $MKFS_OPTION "$1" &> /dev/null
|
|
if [ $? -ne 0 -a "$2" = "fat" ]; then
|
|
# If we fail and we did fat, try vfat.
|
|
mkfs -t vfat $MKFS_OPTION "$1" &> /dev/null
|
|
fi
|
|
if [ $? -ne 0 ]; then
|
|
echo Could not create filesystem
|
|
exit $?
|
|
fi
|
|
fi
|
|
}
|
|
|
|
# 1st parameter is image file
|
|
# 2nd parameter is file system type - fat/ext4
|
|
# 3rd parameter is name of small file
|
|
# 4th parameter is name of big file
|
|
# 5th parameter is fs/nonfs/sb - to dictate generic fs commands or
|
|
# otherwise or sb hostfs
|
|
# 6th parameter is the directory path for the files. Its "" for generic
|
|
# fs and ext4/fat and full patch for sb hostfs
|
|
# UBOOT is set in env
|
|
function test_image() {
|
|
addr="0x01000008"
|
|
length="0x00100000"
|
|
|
|
case "$2" in
|
|
fat)
|
|
FPATH=""
|
|
PREFIX="fat"
|
|
WRITE="write"
|
|
;;
|
|
|
|
ext4)
|
|
# ext4 needs absolute path
|
|
FPATH="/"
|
|
PREFIX="ext4"
|
|
WRITE="write"
|
|
;;
|
|
|
|
*)
|
|
echo "Unhandled filesystem $2. Exiting!"
|
|
exit
|
|
;;
|
|
esac
|
|
|
|
case "$5" in
|
|
fs)
|
|
PREFIX=""
|
|
WRITE="save"
|
|
SUFFIX=" 0:0"
|
|
;;
|
|
|
|
nonfs)
|
|
SUFFIX=" 0:0"
|
|
;;
|
|
|
|
sb)
|
|
PREFIX="sb "
|
|
WRITE="save"
|
|
SUFFIX="fs -"
|
|
;;
|
|
|
|
*)
|
|
echo "Unhandled mode $5. Exiting!"
|
|
exit
|
|
;;
|
|
|
|
esac
|
|
|
|
# sb always uses full path to mointpoint, irrespective of filesystem
|
|
if [ "$5" = "sb" ]; then
|
|
FPATH=${6}/
|
|
fi
|
|
|
|
FILE_WRITE=${3}.w
|
|
FILE_SMALL=$3
|
|
FILE_BIG=$4
|
|
|
|
# In u-boot commands, <interface> stands for host or hostfs
|
|
# hostfs maps to the host fs.
|
|
# host maps to the "sb bind" that we do
|
|
|
|
$UBOOT << EOF
|
|
sb=$5
|
|
setenv bind 'if test "\$sb" != sb; then sb bind 0 "$1"; fi'
|
|
run bind
|
|
# Test Case 1 - ls
|
|
${PREFIX}ls host${SUFFIX} $6
|
|
#
|
|
# We want ${PREFIX}size host 0:0 $3 for host commands and
|
|
# sb size hostfs - $3 for hostfs commands.
|
|
# 1MB is 0x0010 0000
|
|
# Test Case 2 - size of small file
|
|
${PREFIX}size host${SUFFIX} ${FPATH}$FILE_SMALL
|
|
printenv filesize
|
|
setenv filesize
|
|
|
|
# 2.5GB (1024*1024*2500) is 0x9C40 0000
|
|
# Test Case 3 - size of big file
|
|
${PREFIX}size host${SUFFIX} ${FPATH}$FILE_BIG
|
|
printenv filesize
|
|
setenv filesize
|
|
|
|
# Notes about load operation
|
|
# If I use 0x01000000 I get DMA misaligned error message
|
|
# Last two parameters are size and offset.
|
|
|
|
# Test Case 4a - Read full 1MB of small file
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_SMALL
|
|
printenv filesize
|
|
# Test Case 4b - Read full 1MB of small file
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
|
|
# Test Case 5a - First 1MB of big file
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x0
|
|
printenv filesize
|
|
# Test Case 5b - First 1MB of big file
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
|
|
# fails for ext as no offset support
|
|
# Test Case 6a - Last 1MB of big file
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x9C300000
|
|
printenv filesize
|
|
# Test Case 6b - Last 1MB of big file
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
|
|
# fails for ext as no offset support
|
|
# Test Case 7a - One from the last 1MB chunk of 2GB
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x7FF00000
|
|
printenv filesize
|
|
# Test Case 7b - One from the last 1MB chunk of 2GB
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
|
|
# fails for ext as no offset support
|
|
# Test Case 8a - One from the start 1MB chunk from 2GB
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x80000000
|
|
printenv filesize
|
|
# Test Case 8b - One from the start 1MB chunk from 2GB
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
|
|
# fails for ext as no offset support
|
|
# Test Case 9a - One 1MB chunk crossing the 2GB boundary
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG $length 0x7FF80000
|
|
printenv filesize
|
|
# Test Case 9b - One 1MB chunk crossing the 2GB boundary
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
|
|
# Generic failure case
|
|
# Test Case 10 - 2MB chunk from the last 1MB of big file
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_BIG 0x00200000 0x9C300000
|
|
printenv filesize
|
|
#
|
|
|
|
# Read 1MB from small file
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_SMALL
|
|
# Write it back to test the writes
|
|
# Test Case 11a - Check that the write succeeded
|
|
${PREFIX}${WRITE} host${SUFFIX} $addr ${FPATH}$FILE_WRITE \$filesize
|
|
mw.b $addr 00 100
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_WRITE
|
|
# Test Case 11b - Check md5 of written to is same as the one read from
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
#
|
|
|
|
# Next test case checks writing a file whose dirent
|
|
# is the first in the block, which is always true for "."
|
|
# The write should fail, but the lookup should work
|
|
# Test Case 12 - Check directory traversal
|
|
${PREFIX}${WRITE} host${SUFFIX} $addr ${FPATH}. 0x10
|
|
|
|
# Read 1MB from small file
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}$FILE_SMALL
|
|
# Write it via "same directory", i.e. "." dirent
|
|
# Test Case 13a - Check directory traversal
|
|
${PREFIX}${WRITE} host${SUFFIX} $addr ${FPATH}./${FILE_WRITE}2 \$filesize
|
|
mw.b $addr 00 100
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}./${FILE_WRITE}2
|
|
# Test Case 13b - Check md5 of written to is same as the one read from
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
mw.b $addr 00 100
|
|
${PREFIX}load host${SUFFIX} $addr ${FPATH}${FILE_WRITE}2
|
|
# Test Case 13c - Check md5 of written to is same as the one read from
|
|
md5sum $addr \$filesize
|
|
setenv filesize
|
|
#
|
|
reset
|
|
|
|
EOF
|
|
}
|
|
|
|
# 1st argument is the name of the image file.
|
|
# 2nd argument is the file where we generate the md5s of the files
|
|
# generated with the appropriate start and length that we use to test.
|
|
# It creates the necessary files in the image to test.
|
|
# $GB2p5 is the path of the big file (2.5 GB)
|
|
# $MB1 is the path of the small file (1 MB)
|
|
# $MOUNT_DIR is the path we can use to mount the image file.
|
|
function create_files() {
|
|
# Mount the image so we can populate it.
|
|
mkdir -p "$MOUNT_DIR"
|
|
sudo mount -o loop,rw "$1" "$MOUNT_DIR"
|
|
|
|
# Create big file in this image.
|
|
# Note that we work only on the start 1MB, couple MBs in the 2GB range
|
|
# and the last 1 MB of the huge 2.5GB file.
|
|
# So, just put random values only in those areas.
|
|
if [ ! -f "${GB2p5}" ]; then
|
|
sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 \
|
|
&> /dev/null
|
|
sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=2 seek=2047 \
|
|
&> /dev/null
|
|
sudo dd if=/dev/urandom of="${GB2p5}" bs=1M count=1 seek=2499 \
|
|
&> /dev/null
|
|
fi
|
|
|
|
# Create a small file in this image.
|
|
if [ ! -f "${MB1}" ]; then
|
|
sudo dd if=/dev/urandom of="${MB1}" bs=1M count=1 \
|
|
&> /dev/null
|
|
fi
|
|
|
|
# Delete the small file copies which possibly are written as part of a
|
|
# previous test.
|
|
sudo rm -f "${MB1}.w"
|
|
sudo rm -f "${MB1}.w2"
|
|
|
|
# Generate the md5sums of reads that we will test against small file
|
|
dd if="${MB1}" bs=1M skip=0 count=1 2> /dev/null | md5sum > "$2"
|
|
|
|
# Generate the md5sums of reads that we will test against big file
|
|
# One from beginning of file.
|
|
dd if="${GB2p5}" bs=1M skip=0 count=1 \
|
|
2> /dev/null | md5sum >> "$2"
|
|
|
|
# One from end of file.
|
|
dd if="${GB2p5}" bs=1M skip=2499 count=1 \
|
|
2> /dev/null | md5sum >> "$2"
|
|
|
|
# One from the last 1MB chunk of 2GB
|
|
dd if="${GB2p5}" bs=1M skip=2047 count=1 \
|
|
2> /dev/null | md5sum >> "$2"
|
|
|
|
# One from the start 1MB chunk from 2GB
|
|
dd if="${GB2p5}" bs=1M skip=2048 count=1 \
|
|
2> /dev/null | md5sum >> "$2"
|
|
|
|
# One 1MB chunk crossing the 2GB boundary
|
|
dd if="${GB2p5}" bs=512K skip=4095 count=2 \
|
|
2> /dev/null | md5sum >> "$2"
|
|
|
|
sync
|
|
sudo umount "$MOUNT_DIR"
|
|
rmdir "$MOUNT_DIR"
|
|
}
|
|
|
|
# 1st parameter is the text to print
|
|
# if $? is 0 its a pass, else a fail
|
|
# As a side effect it shall update env variable PASS and FAIL
|
|
function pass_fail() {
|
|
if [ $? -eq 0 ]; then
|
|
echo pass - "$1"
|
|
PASS=$((PASS + 1))
|
|
else
|
|
echo FAIL - "$1"
|
|
FAIL=$((FAIL + 1))
|
|
fi
|
|
}
|
|
|
|
# 1st parameter is the string which leads to an md5 generation
|
|
# 2nd parameter is the file we grep, for that string
|
|
# 3rd parameter is the name of the file which has md5s in it
|
|
# 4th parameter is the line # in the md5 file that we match it against
|
|
# This function checks if the md5 of the file in the sandbox matches
|
|
# that calculated while generating the file
|
|
# 5th parameter is the string to print with the result
|
|
check_md5() {
|
|
# md5sum in u-boot has output of form:
|
|
# md5 for 01000008 ... 01100007 ==> <md5>
|
|
# the 7th field is the actual md5
|
|
md5_src=`grep -A2 "$1" "$2" | grep "md5 for" | tr -d '\r'`
|
|
md5_src=($md5_src)
|
|
md5_src=${md5_src[6]}
|
|
|
|
# The md5 list, each line is of the form:
|
|
# - <md5>
|
|
# the 2nd field is the actual md5
|
|
md5_dst=`sed -n $4p $3`
|
|
md5_dst=($md5_dst)
|
|
md5_dst=${md5_dst[0]}
|
|
|
|
# For a pass they should match.
|
|
[ "$md5_src" = "$md5_dst" ]
|
|
pass_fail "$5"
|
|
}
|
|
|
|
# 1st parameter is the name of the output file to check
|
|
# 2nd parameter is the name of the file containing the md5 expected
|
|
# 3rd parameter is the name of the small file
|
|
# 4th parameter is the name of the big file
|
|
# 5th paramter is the name of the written file
|
|
# This function checks the output file for correct results.
|
|
function check_results() {
|
|
echo "** Start $1"
|
|
|
|
PASS=0
|
|
FAIL=0
|
|
|
|
# Check if the ls is showing correct results for 2.5 gb file
|
|
grep -A6 "Test Case 1 " "$1" | egrep -iq "2621440000 *$4"
|
|
pass_fail "TC1: ls of $4"
|
|
|
|
# Check if the ls is showing correct results for 1 mb file
|
|
grep -A6 "Test Case 1 " "$1" | egrep -iq "1048576 *$3"
|
|
pass_fail "TC1: ls of $3"
|
|
|
|
# Check size command on 1MB.file
|
|
egrep -A3 "Test Case 2 " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC2: size of $3"
|
|
|
|
# Check size command on 2.5GB.file
|
|
egrep -A3 "Test Case 3 " "$1" | grep -q "filesize=9c400000"
|
|
pass_fail "TC3: size of $4"
|
|
|
|
# Check read full mb of 1MB.file
|
|
grep -A4 "Test Case 4a " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC4: load of $3 size"
|
|
check_md5 "Test Case 4b " "$1" "$2" 1 "TC4: load from $3"
|
|
|
|
# Check first mb of 2.5GB.file
|
|
grep -A4 "Test Case 5a " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC5: load of 1st MB from $4 size"
|
|
check_md5 "Test Case 5b " "$1" "$2" 2 "TC5: load of 1st MB from $4"
|
|
|
|
# Check last mb of 2.5GB.file
|
|
grep -A4 "Test Case 6a " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC6: load of last MB from $4 size"
|
|
check_md5 "Test Case 6b " "$1" "$2" 3 "TC6: load of last MB from $4"
|
|
|
|
# Check last 1mb chunk of 2gb from 2.5GB file
|
|
grep -A4 "Test Case 7a " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC7: load of last 1mb chunk of 2GB from $4 size"
|
|
check_md5 "Test Case 7b " "$1" "$2" 4 \
|
|
"TC7: load of last 1mb chunk of 2GB from $4"
|
|
|
|
# Check first 1mb chunk after 2gb from 2.5GB file
|
|
grep -A4 "Test Case 8a " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC8: load 1st MB chunk after 2GB from $4 size"
|
|
check_md5 "Test Case 8b " "$1" "$2" 5 \
|
|
"TC8: load 1st MB chunk after 2GB from $4"
|
|
|
|
# Check 1mb chunk crossing the 2gb boundary from 2.5GB file
|
|
grep -A4 "Test Case 9a " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC9: load 1MB chunk crossing 2GB boundary from $4 size"
|
|
check_md5 "Test Case 9b " "$1" "$2" 6 \
|
|
"TC9: load 1MB chunk crossing 2GB boundary from $4"
|
|
|
|
# Check 2mb chunk from the last 1MB of 2.5GB file loads 1MB
|
|
grep -A5 "Test Case 10 " "$1" | grep -q "filesize=100000"
|
|
pass_fail "TC10: load 2MB from the last 1MB of $4 loads 1MB"
|
|
|
|
# Check 1mb chunk write
|
|
grep -A2 "Test Case 11a " "$1" | grep -q '1048576 bytes written'
|
|
pass_fail "TC11: 1MB write to $3.w - write succeeded"
|
|
check_md5 "Test Case 11b " "$1" "$2" 1 \
|
|
"TC11: 1MB write to $3.w - content verified"
|
|
|
|
# Check lookup of 'dot' directory
|
|
grep -A4 "Test Case 12 " "$1" | grep -q 'Unable to write file'
|
|
pass_fail "TC12: 1MB write to . - write denied"
|
|
|
|
# Check directory traversal
|
|
grep -A2 "Test Case 13a " "$1" | grep -q '1048576 bytes written'
|
|
pass_fail "TC13: 1MB write to ./$3.w2 - write succeeded"
|
|
check_md5 "Test Case 13b " "$1" "$2" 1 \
|
|
"TC13: 1MB read from ./$3.w2 - content verified"
|
|
check_md5 "Test Case 13c " "$1" "$2" 1 \
|
|
"TC13: 1MB read from $3.w2 - content verified"
|
|
|
|
echo "** End $1"
|
|
}
|
|
|
|
# Takes in one parameter which is "fs" or "nonfs", which then dictates
|
|
# if a fs test (size/load/save) or a nonfs test (fatread/extread) needs to
|
|
# be performed.
|
|
function test_fs_nonfs() {
|
|
echo "Creating files in $fs image if not already present."
|
|
create_files $IMAGE $MD5_FILE_FS
|
|
|
|
OUT_FILE="${OUT}.$1.${fs}.out"
|
|
test_image $IMAGE $fs $SMALL_FILE $BIG_FILE $1 "" \
|
|
> ${OUT_FILE} 2>&1
|
|
# strip out noise from fs code
|
|
grep -v -e "File System is consistent\|update journal finished" \
|
|
-e "reading .*\.file\|writing .*\.file.w" \
|
|
< ${OUT_FILE} > ${OUT_FILE}_clean
|
|
check_results ${OUT_FILE}_clean $MD5_FILE_FS $SMALL_FILE \
|
|
$BIG_FILE
|
|
TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
|
|
TOTAL_PASS=$((TOTAL_PASS + PASS))
|
|
echo "Summary: PASS: $PASS FAIL: $FAIL"
|
|
echo "--------------------------------------------"
|
|
}
|
|
|
|
# ********************
|
|
# * End of functions *
|
|
# ********************
|
|
|
|
check_clean "$1"
|
|
check_prereq
|
|
compile_sandbox
|
|
prepare_env
|
|
|
|
# Track TOTAL_FAIL and TOTAL_PASS
|
|
TOTAL_FAIL=0
|
|
TOTAL_PASS=0
|
|
|
|
# In each loop, for a given file system image, we test both the
|
|
# fs command, like load/size/write, the file system specific command
|
|
# like: ext4load/ext4size/ext4write and the sb load/ls/save commands.
|
|
for fs in ext4 fat; do
|
|
|
|
echo "Creating $fs image if not already present."
|
|
IMAGE=${IMG}.${fs}.img
|
|
MD5_FILE_FS="${MD5_FILE}.${fs}"
|
|
create_image $IMAGE $fs
|
|
|
|
# sb commands test
|
|
echo "Creating files in $fs image if not already present."
|
|
create_files $IMAGE $MD5_FILE_FS
|
|
|
|
# Lets mount the image and test sb hostfs commands
|
|
mkdir -p "$MOUNT_DIR"
|
|
if [ "$fs" = "fat" ]; then
|
|
uid="uid=`id -u`"
|
|
else
|
|
uid=""
|
|
fi
|
|
sudo mount -o loop,rw,$uid "$IMAGE" "$MOUNT_DIR"
|
|
sudo chmod 777 "$MOUNT_DIR"
|
|
|
|
OUT_FILE="${OUT}.sb.${fs}.out"
|
|
test_image $IMAGE $fs $SMALL_FILE $BIG_FILE sb `pwd`/$MOUNT_DIR \
|
|
> ${OUT_FILE} 2>&1
|
|
sudo umount "$MOUNT_DIR"
|
|
rmdir "$MOUNT_DIR"
|
|
|
|
check_results $OUT_FILE $MD5_FILE_FS $SMALL_FILE $BIG_FILE
|
|
TOTAL_FAIL=$((TOTAL_FAIL + FAIL))
|
|
TOTAL_PASS=$((TOTAL_PASS + PASS))
|
|
echo "Summary: PASS: $PASS FAIL: $FAIL"
|
|
echo "--------------------------------------------"
|
|
|
|
test_fs_nonfs nonfs
|
|
test_fs_nonfs fs
|
|
done
|
|
|
|
echo "Total Summary: TOTAL PASS: $TOTAL_PASS TOTAL FAIL: $TOTAL_FAIL"
|
|
echo "--------------------------------------------"
|
|
if [ $TOTAL_FAIL -eq 0 ]; then
|
|
echo "PASSED"
|
|
exit 0
|
|
else
|
|
echo "FAILED"
|
|
exit 1
|
|
fi
|
|
|