upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
290 lines
8.6 KiB
290 lines
8.6 KiB
/*
|
|
* (C) Copyright 2009
|
|
* Marvell Semiconductor <www.marvell.com>
|
|
* Prafulla Wadaskar <prafulla@marvell.com>
|
|
*
|
|
* (C) Copyright 2009
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* (C) Copyright 2010-2011
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* for linking errors see
|
|
* http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
|
|
*/
|
|
|
|
#ifndef _CONFIG_KM_ARM_H
|
|
#define _CONFIG_KM_ARM_H
|
|
|
|
/*
|
|
* High Level Configuration Options (easy to change)
|
|
*/
|
|
#define CONFIG_MARVELL
|
|
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
|
|
#define CONFIG_KW88F6281 /* SOC Name */
|
|
|
|
#define CONFIG_MACH_TYPE MACH_TYPE_KM_KIRKWOOD
|
|
|
|
#define CONFIG_NAND_ECC_BCH
|
|
|
|
/* include common defines/options for all Keymile boards */
|
|
#include "keymile-common.h"
|
|
|
|
/* SPI NOR Flash default params, used by sf commands */
|
|
#define CONFIG_SF_DEFAULT_SPEED 8100000
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
|
|
|
|
#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_ENV_SPI_BUS 0
|
|
#define CONFIG_ENV_SPI_CS 0
|
|
#define CONFIG_ENV_SPI_MAX_HZ 8100000
|
|
#define CONFIG_ENV_SPI_MODE SPI_MODE_3
|
|
#endif
|
|
|
|
/* Reserve 4 MB for malloc */
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
|
|
#include "asm/arch/config.h"
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x07d00000 /* code address before reloc */
|
|
#define CONFIG_SYS_MEMTEST_START 0x00400000 /* 4M */
|
|
#define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
|
|
|
|
/* pseudo-non volatile RAM [hex] */
|
|
#define CONFIG_KM_PNVRAM 0x80000
|
|
/* physical RAM MTD size [hex] */
|
|
#define CONFIG_KM_PHRAM 0x17F000
|
|
|
|
#define CONFIG_KM_CRAMFS_ADDR 0x2400000
|
|
#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */
|
|
#define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */
|
|
|
|
/* architecture specific default bootargs */
|
|
#define CONFIG_KM_DEF_BOOT_ARGS_CPU \
|
|
"bootcountaddr=${bootcountaddr} ${mtdparts}" \
|
|
" boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
|
|
|
|
#define CONFIG_KM_DEF_ENV_CPU \
|
|
"u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0" \
|
|
CONFIG_KM_UPDATE_UBOOT \
|
|
"set_fdthigh=setenv fdt_high ${kernelmem}\0" \
|
|
"checkfdt=" \
|
|
"if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \
|
|
"then true; else setenv cramfsloadfdt true; " \
|
|
"setenv boot bootm ${load_addr_r}; " \
|
|
"echo No FDT found, booting with the kernel " \
|
|
"appended one; fi\0" \
|
|
""
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK
|
|
#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE
|
|
#define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE
|
|
|
|
/*
|
|
* Serial Port configuration
|
|
* The following definitions let you select what serial you want to use
|
|
* for your console driver.
|
|
*/
|
|
|
|
#define CONFIG_CONS_INDEX 1 /* Console on UART0 */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_INITRD_TAG /* enable INITRD tag */
|
|
#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
|
|
|
|
/*
|
|
* NAND Flash configuration
|
|
*/
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
|
|
#define BOOTFLASH_START 0x0
|
|
|
|
/* Kirkwood has two serial IF */
|
|
#if (CONFIG_CONS_INDEX == 2)
|
|
#define CONFIG_KM_CONSOLE_TTY "ttyS1"
|
|
#else
|
|
#define CONFIG_KM_CONSOLE_TTY "ttyS0"
|
|
#endif
|
|
|
|
/*
|
|
* Other required minimal configurations
|
|
*/
|
|
#define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */
|
|
#define CONFIG_NR_DRAM_BANKS 4
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
|
|
|
|
/*
|
|
* Ethernet Driver configuration
|
|
*/
|
|
#define CONFIG_NETCONSOLE /* include NetConsole support */
|
|
#define CONFIG_MII /* expose smi ove miiphy interface */
|
|
#define CONFIG_MVGBE /* Enable Marvell Gbe Controller Driver */
|
|
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
|
|
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
|
|
#define CONFIG_PHY_BASE_ADR 0
|
|
#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
|
|
#define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */
|
|
|
|
/*
|
|
* I2C related stuff
|
|
*/
|
|
#undef CONFIG_I2C_MVTWSI
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
|
|
#define CONFIG_SYS_I2C_INIT_BOARD
|
|
|
|
#define CONFIG_KIRKWOOD_GPIO /* Enable GPIO Support */
|
|
#define CONFIG_SYS_NUM_I2C_BUSES 6
|
|
#define CONFIG_SYS_I2C_MAX_HOPS 1
|
|
#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
|
|
{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
|
|
}
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#include <asm/arch/gpio.h>
|
|
extern void __set_direction(unsigned pin, int high);
|
|
void set_sda(int state);
|
|
void set_scl(int state);
|
|
int get_sda(void);
|
|
int get_scl(void);
|
|
#define KM_KIRKWOOD_SDA_PIN 8
|
|
#define KM_KIRKWOOD_SCL_PIN 9
|
|
#define KM_KIRKWOOD_SOFT_I2C_GPIOS 0x0300
|
|
#define KM_KIRKWOOD_ENV_WP 38
|
|
|
|
#define I2C_ACTIVE __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
|
|
#define I2C_TRISTATE __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
|
|
#define I2C_READ (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
|
|
#define I2C_SDA(bit) kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
|
|
#define I2C_SCL(bit) kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
|
|
#endif
|
|
|
|
#define I2C_DELAY udelay(1)
|
|
#define I2C_SOFT_DECLARATIONS
|
|
|
|
#define CONFIG_SYS_I2C_SOFT_SLAVE 0x0
|
|
#define CONFIG_SYS_I2C_SOFT_SPEED 100000
|
|
|
|
/* EEprom support 24C128, 24C256 valid for environment eeprom */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 Byte write page */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
|
|
/*
|
|
* Environment variables configurations
|
|
*/
|
|
#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_ENV_OFFSET 0xc0000 /* no bracets! */
|
|
#define CONFIG_ENV_SIZE 0x02000 /* Size of Environment */
|
|
#define CONFIG_ENV_SECT_SIZE 0x10000
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
|
|
CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_TOTAL_SIZE 0x20000 /* no bracets! */
|
|
#else
|
|
#define CONFIG_SYS_DEF_EEPROM_ADDR 0x50
|
|
#define CONFIG_ENV_EEPROM_IS_ON_I2C
|
|
#define CONFIG_SYS_EEPROM_WREN
|
|
#define CONFIG_ENV_OFFSET 0x0 /* no bracets! */
|
|
#define CONFIG_ENV_SIZE (0x2000 - CONFIG_ENV_OFFSET)
|
|
#define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x2000 /* no bracets! */
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
|
|
|
|
/* SPI bus claim MPP configuration */
|
|
#define CONFIG_SYS_KW_SPI_MPP 0x0
|
|
|
|
#define FLASH_GPIO_PIN 0x00010000
|
|
#define KM_FLASH_GPIO_PIN 16
|
|
|
|
#define CONFIG_KM_UPDATE_UBOOT \
|
|
"update=" \
|
|
"sf probe 0;sf erase 0 +${filesize};" \
|
|
"sf write ${load_addr_r} 0 ${filesize};\0"
|
|
|
|
#if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
|
|
#define CONFIG_KM_NEW_ENV \
|
|
"newenv=sf probe 0;" \
|
|
"sf erase " __stringify(CONFIG_ENV_OFFSET) " " \
|
|
__stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
|
|
#else
|
|
#define CONFIG_KM_NEW_ENV \
|
|
"newenv=setenv addr 0x100000 && " \
|
|
"i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; " \
|
|
"mw.b ${addr} 0 4 && " \
|
|
"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
|
|
" ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && " \
|
|
"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
|
|
" ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
|
|
#endif
|
|
|
|
#ifndef CONFIG_KM_BOARD_EXTRA_ENV
|
|
#define CONFIG_KM_BOARD_EXTRA_ENV ""
|
|
#endif
|
|
|
|
/*
|
|
* Default environment variables
|
|
*/
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_KM_BOARD_EXTRA_ENV \
|
|
CONFIG_KM_DEF_ENV \
|
|
CONFIG_KM_NEW_ENV \
|
|
"arch=arm\0" \
|
|
""
|
|
|
|
#if !defined(CONFIG_MTD_NOR_FLASH)
|
|
#undef CONFIG_FLASH_CFI_MTD
|
|
#undef CONFIG_JFFS2_CMDLINE
|
|
#endif
|
|
|
|
/* additions for new relocation code, must be added to all boards */
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
/* Do early setups now in board_init_f() */
|
|
|
|
/*
|
|
* resereved pram area at the end of memroy [hex]
|
|
* 8Mbytes for switch + 4Kbytes for bootcount
|
|
*/
|
|
#define CONFIG_KM_RESERVED_PRAM 0x801000
|
|
/* address for the bootcount (taken from end of RAM) */
|
|
#define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM)
|
|
/* Use generic bootcount RAM driver */
|
|
#define CONFIG_BOOTCOUNT_RAM
|
|
|
|
/* enable POST tests */
|
|
#define CONFIG_POST (CONFIG_SYS_POST_MEM_REGIONS)
|
|
#define CONFIG_POST_SKIP_ENV_FLAGS
|
|
#define CONFIG_POST_EXTERNAL_WORD_FUNCS
|
|
|
|
/* we do the whole PCIe FPGA config stuff here */
|
|
|
|
#endif /* _CONFIG_KM_ARM_H */
|
|
|