upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1011 lines
28 KiB
1011 lines
28 KiB
/*----------------------------------------------------------------------+
|
|
* This source code is dual-licensed. You may use it under the terms of
|
|
* the GNU General Public License version 2, or under the license below.
|
|
*
|
|
* This source code has been made available to you by IBM on an AS-IS
|
|
* basis. Anyone receiving this source is licensed under IBM
|
|
* copyrights to use it in any way he or she deems fit, including
|
|
* copying it, modifying it, compiling it, and redistributing it either
|
|
* with or without modifications. No license under IBM patents or
|
|
* patent applications is to be implied by the copyright license.
|
|
*
|
|
* Any user of this software should understand that IBM cannot provide
|
|
* technical support for this software and will not be responsible for
|
|
* any consequences resulting from the use of this software.
|
|
*
|
|
* Any person who transfers this source code or any derivative work
|
|
* must include the IBM copyright notice, this paragraph, and the
|
|
* preceding two paragraphs in the transferred software.
|
|
*
|
|
* COPYRIGHT I B M CORPORATION 1995
|
|
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <ppc4xx.h>
|
|
#include "config.h"
|
|
|
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
|
|
#define FPGA_BRDC 0xF0300004
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
#include "exbitgen.h"
|
|
|
|
/* IIC declarations (This is an extract from 405gp_i2c.h, which also contains some */
|
|
/* c-code declarations and consequently can't be included here). */
|
|
/* (Possibly to be solved somehow else). */
|
|
/*--------------------------------------------------------------------- */
|
|
#define I2C_REGISTERS_BASE_ADDRESS 0xEF600500
|
|
#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF)
|
|
#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF)
|
|
#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR)
|
|
#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR)
|
|
#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL)
|
|
#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL)
|
|
#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS)
|
|
#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS)
|
|
#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR)
|
|
#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR)
|
|
#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IIC0_CLKDIV)
|
|
#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK)
|
|
#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT)
|
|
#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS)
|
|
#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL)
|
|
|
|
/* MDCNTL Register Bit definition */
|
|
#define IIC_MDCNTL_HSCL 0x01
|
|
#define IIC_MDCNTL_EUBS 0x02
|
|
#define IIC_MDCNTL_FMDB 0x40
|
|
#define IIC_MDCNTL_FSDB 0x80
|
|
|
|
/* CNTL Register Bit definition */
|
|
#define IIC_CNTL_PT 0x01
|
|
#define IIC_CNTL_READ 0x02
|
|
#define IIC_CNTL_CHT 0x04
|
|
|
|
/* STS Register Bit definition */
|
|
#define IIC_STS_PT 0X01
|
|
#define IIC_STS_ERR 0X04
|
|
#define IIC_STS_MDBS 0X20
|
|
|
|
/* EXTSTS Register Bit definition */
|
|
#define IIC_EXTSTS_XFRA 0X01
|
|
#define IIC_EXTSTS_ICT 0X02
|
|
#define IIC_EXTSTS_LA 0X04
|
|
|
|
/* LED codes used for inditing progress and errors during read of DIMM SPD. */
|
|
/*--------------------------------------------------------------------- */
|
|
#define LED_SDRAM_CODE_1 0xef
|
|
#define LED_SDRAM_CODE_2 0xee
|
|
#define LED_SDRAM_CODE_3 0xed
|
|
#define LED_SDRAM_CODE_4 0xec
|
|
#define LED_SDRAM_CODE_5 0xeb
|
|
#define LED_SDRAM_CODE_6 0xea
|
|
#define LED_SDRAM_CODE_7 0xe9
|
|
#define LED_SDRAM_CODE_8 0xe8
|
|
#define LED_SDRAM_CODE_9 0xe7
|
|
#define LED_SDRAM_CODE_10 0xe6
|
|
#define LED_SDRAM_CODE_11 0xe5
|
|
#define LED_SDRAM_CODE_12 0xe4
|
|
#define LED_SDRAM_CODE_13 0xe3
|
|
#define LED_SDRAM_CODE_14 0xe2
|
|
#define LED_SDRAM_CODE_15 0xe1
|
|
#define LED_SDRAM_CODE_16 0xe0
|
|
|
|
|
|
#define TIMEBASE_10PS (1000000000 / CONFIG_SYS_CLK_FREQ) * 100
|
|
|
|
#define FLASH_8bit_AP 0x9B015480
|
|
#define FLASH_8bit_CR 0xFFF18000 /* 1MB(min), 8bit, R/W */
|
|
|
|
#define FLASH_32bit_AP 0x9B015480
|
|
#define FLASH_32bit_CR 0xFFE3C000 /* 2MB, 32bit, R/W */
|
|
|
|
|
|
#define WDCR_EBC(reg,val) addi r4,0,reg;\
|
|
mtdcr EBC0_CFGADDR,r4;\
|
|
addis r4,0,val@h;\
|
|
ori r4,r4,val@l;\
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
/*---------------------------------------------------------------------
|
|
* Function: ext_bus_cntlr_init
|
|
* Description: Initializes the External Bus Controller for the external
|
|
* peripherals. IMPORTANT: For pass1 this code must run from
|
|
* cache since you can not reliably change a peripheral banks
|
|
* timing register (pbxap) while running code from that bank.
|
|
* For ex., since we are running from ROM on bank 0, we can NOT
|
|
* execute the code that modifies bank 0 timings from ROM, so
|
|
* we run it from cache.
|
|
* Bank 0 - Boot flash
|
|
* Bank 1-4 - application flash
|
|
* Bank 5 - CPLD
|
|
* Bank 6 - not used
|
|
* Bank 7 - Heathrow chip
|
|
*---------------------------------------------------------------------
|
|
*/
|
|
.globl ext_bus_cntlr_init
|
|
ext_bus_cntlr_init:
|
|
mflr r4 /* save link register */
|
|
bl ..getAddr
|
|
..getAddr:
|
|
mflr r3 /* get address of ..getAddr */
|
|
mtlr r4 /* restore link register */
|
|
addi r4,0,14 /* set ctr to 10; used to prefetch */
|
|
mtctr r4 /* 10 cache lines to fit this function */
|
|
/* in cache (gives us 8x10=80 instrctns) */
|
|
..ebcloop:
|
|
icbt r0,r3 /* prefetch cache line for addr in r3 */
|
|
addi r3,r3,32 /* move to next cache line */
|
|
bdnz ..ebcloop /* continue for 10 cache lines */
|
|
|
|
mflr r31 /* save link register */
|
|
|
|
/*-----------------------------------------------------------
|
|
* Delay to ensure all accesses to ROM are complete before changing
|
|
* bank 0 timings. 200usec should be enough.
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
|
|
*-----------------------------------------------------------
|
|
*/
|
|
|
|
addis r3,0,0x0
|
|
ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
|
|
mtctr r3
|
|
..spinlp:
|
|
bdnz ..spinlp /* spin loop */
|
|
|
|
/*---------------------------------------------------------------
|
|
* Memory Bank 0 (Boot Flash) initialization
|
|
*---------------------------------------------------------------
|
|
*/
|
|
WDCR_EBC(PB1AP, FLASH_32bit_AP)
|
|
WDCR_EBC(PB0CR, 0xffe38000)
|
|
/*pnc WDCR_EBC(PB0CR, FLASH_32bit_CR) */
|
|
|
|
/*---------------------------------------------------------------
|
|
* Memory Bank 5 (CPLD) initialization
|
|
*---------------------------------------------------------------
|
|
*/
|
|
WDCR_EBC(PB5AP, 0x01010040)
|
|
/*jsa recommendation: WDCR_EBC(PB5AP, 0x00010040) */
|
|
WDCR_EBC(PB5CR, 0x10038000)
|
|
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 6 (not used) initialization */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB6CR, 0x00000000)
|
|
|
|
/* Read HW ID to determine whether old H2 board or new generic CPU board */
|
|
addis r3, 0, HW_ID_ADDR@h
|
|
ori r3, r3, HW_ID_ADDR@l
|
|
lbz r3,0x0000(r3)
|
|
cmpi 0, r3, 1 /* if (HW_ID==1) */
|
|
beq setup_h2evalboard /* then jump */
|
|
cmpi 0, r3, 2 /* if (HW_ID==2) */
|
|
beq setup_genieboard /* then jump */
|
|
cmpi 0, r3, 3 /* if (HW_ID==3) */
|
|
beq setup_genieboard /* then jump */
|
|
|
|
setup_genieboard:
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 1 (Application Flash) initialization for generic CPU board */
|
|
/*--------------------------------------------------------------- */
|
|
/* WDCR_EBC(PB1AP, 0x7b015480) /###* T.B.M. */
|
|
/* WDCR_EBC(PB1AP, 0x7F8FFE80) /###* T.B.M. */
|
|
WDCR_EBC(PB1AP, 0x9b015480) /* hlb-20020207: burst 8 bit 6 cycles */
|
|
|
|
/* WDCR_EBC(PB1CR, 0x20098000) /###* 16 MB */
|
|
WDCR_EBC(PB1CR, 0x200B8000) /* 32 MB */
|
|
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 4 (Onboard FPGA) initialization for generic CPU board */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB4AP, 0x01010000) /* */
|
|
WDCR_EBC(PB4CR, 0x1021c000) /* */
|
|
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 7 (Heathrow chip on Reference board) initialization */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB7AP, 0x200ffe80) /* No Ready, many wait states (let reflections die out) */
|
|
WDCR_EBC(PB7CR, 0X4001A000)
|
|
|
|
bl setup_continue
|
|
|
|
|
|
setup_h2evalboard:
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 1 (Application Flash) initialization */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB1AP, 0x7b015480) /* T.B.M. */
|
|
/*3010 WDCR_EBC(PB1AP, 0x7F8FFE80) /###* T.B.M. */
|
|
WDCR_EBC(PB1CR, 0x20058000)
|
|
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 2 (Application Flash) initialization */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB2AP, 0x7b015480) /* T.B.M. */
|
|
/*3010 WDCR_EBC(PB2AP, 0x7F8FFE80) /###* T.B.M. */
|
|
WDCR_EBC(PB2CR, 0x20458000)
|
|
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 3 (Application Flash) initialization */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB3AP, 0x7b015480) /* T.B.M. */
|
|
/*3010 WDCR_EBC(PB3AP, 0x7F8FFE80) /###* T.B.M. */
|
|
WDCR_EBC(PB3CR, 0x20858000)
|
|
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 4 (Application Flash) initialization */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB4AP, 0x7b015480) /* T.B.M. */
|
|
/*3010 WDCR_EBC(PB4AP, 0x7F8FFE80) /###* T.B.M. */
|
|
WDCR_EBC(PB4CR, 0x20C58000)
|
|
|
|
/*--------------------------------------------------------------- */
|
|
/* Memory Bank 7 (Heathrow chip) initialization */
|
|
/*--------------------------------------------------------------- */
|
|
WDCR_EBC(PB7AP, 0x02000280) /* No Ready, 4 wait states */
|
|
WDCR_EBC(PB7CR, 0X4001A000)
|
|
|
|
setup_continue:
|
|
|
|
|
|
mtlr r31 /* restore lr */
|
|
nop /* pass2 DCR errata #8 */
|
|
blr
|
|
|
|
/*--------------------------------------------------------------------- */
|
|
/* Function: sdram_init */
|
|
/* Description: Configures SDRAM memory banks. */
|
|
/*--------------------------------------------------------------------- */
|
|
.globl sdram_init
|
|
|
|
sdram_init:
|
|
#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
|
|
blr
|
|
#else
|
|
mflr r31
|
|
|
|
/* output SDRAM code on LEDs */
|
|
addi r4, 0, LED_SDRAM_CODE_1
|
|
addis r5, 0, 0x1000
|
|
ori r5, r5, 0x0001
|
|
stb r4,0(r5)
|
|
eieio
|
|
|
|
/* Read contents of spd */
|
|
/*--------------------- */
|
|
bl read_spd
|
|
|
|
/*----------------------------------------------------------- */
|
|
/* */
|
|
/* */
|
|
/* Update SDRAM timing register */
|
|
/* */
|
|
/* */
|
|
/*----------------------------------------------------------- */
|
|
|
|
/* Read PLL feedback divider and calculate clock period of local bus in */
|
|
/* granularity of 10 ps. Save clock period in r30 */
|
|
/*-------------------------------------------------------------- */
|
|
mfdcr r4, CPC0_PLLMR
|
|
addi r9, 0, 25
|
|
srw r4, r4, r9
|
|
andi. r4, r4, 0x07
|
|
addis r5, 0, TIMEBASE_10PS@h
|
|
ori r5, r5, TIMEBASE_10PS@l
|
|
divwu r30, r5, r4
|
|
|
|
/* Determine CASL */
|
|
/*--------------- */
|
|
bl find_casl /* Returns CASL in r3 */
|
|
|
|
/* Calc trp_clocks = (trp * 100 + (clk - 1)) / clk */
|
|
/* (trp read from byte 27 in granularity of 1 ns) */
|
|
/*------------------------------------------------ */
|
|
mulli r16, r16, 100
|
|
add r16, r16, r30
|
|
addi r6, 0, 1
|
|
subf r16, r6, r16
|
|
divwu r16, r16, r30
|
|
|
|
/* Calc trcd_clocks = (trcd * 100 + (clk - 1) ) / clk */
|
|
/* (trcd read from byte 29 in granularity of 1 ns) */
|
|
/*--------------------------------------------------- */
|
|
mulli r17, r17, 100
|
|
add r17, r17, r30
|
|
addi r6, 0, 1
|
|
subf r17, r6, r17
|
|
divwu r17, r17, r30
|
|
|
|
/* Calc tras_clocks = (tras * 100 + (clk - 1) ) / clk */
|
|
/* (tras read from byte 30 in granularity of 1 ns) */
|
|
/*--------------------------------------------------- */
|
|
mulli r18, r18, 100
|
|
add r18, r18, r30
|
|
addi r6, 0, 1
|
|
subf r18, r6, r18
|
|
divwu r18, r18, r30
|
|
|
|
/* Calc trc_clocks = trp_clocks + tras_clocks */
|
|
/*------------------------------------------- */
|
|
add r18, r18, r16
|
|
|
|
/* CASL value */
|
|
/*----------- */
|
|
addi r9, 0, 23
|
|
slw r4, r3, r9
|
|
|
|
/* PTA = trp_clocks - 1 */
|
|
/*--------------------- */
|
|
addi r6, 0, 1
|
|
subf r5, r6, r16
|
|
addi r9, 0, 18
|
|
slw r5, r5, r9
|
|
or r4, r4, r5
|
|
|
|
/* CTP = trc_clocks - trp_clocks - trcd_clocks - 1 */
|
|
/*------------------------------------------------ */
|
|
addi r5, r18, 0
|
|
subf r5, r16, r5
|
|
subf r5, r17, r5
|
|
addi r6, 0, 1
|
|
subf r5, r6, r5
|
|
addi r9, 0, 16
|
|
slw r5, r5, r9
|
|
or r4, r4, r5
|
|
|
|
/* LDF = 1 */
|
|
/*-------- */
|
|
ori r4, r4, 0x4000
|
|
|
|
/* RFTA = trc_clocks - 4 */
|
|
/*---------------------- */
|
|
addi r6, 0, 4
|
|
subf r5, r6, r18
|
|
addi r9, 0, 2
|
|
slw r5, r5, r9
|
|
or r4, r4, r5
|
|
|
|
/* RCD = trcd_clocks - 1 */
|
|
/*---------------------- */
|
|
addi r6, 0, 1
|
|
subf r5, r6, r17
|
|
or r4, r4, r5
|
|
|
|
/*----------------------------------------------------------- */
|
|
/* Set SDTR1 */
|
|
/*----------------------------------------------------------- */
|
|
addi r5,0,SDRAM0_TR
|
|
mtdcr SDRAM0_CFGADDR,r5
|
|
mtdcr SDRAM0_CFGDATA,r4
|
|
|
|
/*----------------------------------------------------------- */
|
|
/* */
|
|
/* */
|
|
/* Update memory bank 0-3 configuration registers */
|
|
/* */
|
|
/* */
|
|
/*----------------------------------------------------------- */
|
|
|
|
/* Build contents of configuration register for bank 0 into r6 */
|
|
/*------------------------------------------------------------ */
|
|
bl find_mode /* returns addressing mode in r3 */
|
|
addi r29, r3, 0 /* save mode temporarily in r29 */
|
|
bl find_size_code /* returns size code in r3 */
|
|
addi r9, 0, 17 /* bit offset of size code in configuration register */
|
|
slw r3, r3, r9 /* */
|
|
addi r9, 0, 13 /* bit offset of addressing mode in configuration register */
|
|
slw r29, r29, r9 /* */
|
|
or r3, r29, r3 /* merge size code and addressing mode */
|
|
ori r6, r3, CONFIG_SYS_SDRAM_BASE + 1 /* insert base address and enable bank */
|
|
|
|
/* Calculate banksize r15 = (density << 22) / 2 */
|
|
/*--------------------------------------------- */
|
|
addi r9, 0, 21
|
|
slw r15, r15, r9
|
|
|
|
/* Set SDRAM bank 0 register and adjust r6 for next bank */
|
|
/*------------------------------------------------------ */
|
|
addi r7,0,SDRAM0_B0CR
|
|
mtdcr SDRAM0_CFGADDR,r7
|
|
mtdcr SDRAM0_CFGDATA,r6
|
|
|
|
add r6, r6, r15 /* add bank size to base address for next bank */
|
|
|
|
/* If two rows/banks then set SDRAM bank 1 register and adjust r6 for next bank */
|
|
/*---------------------------------------------------------------------------- */
|
|
cmpi 0, r12, 2
|
|
bne b1skip
|
|
|
|
addi r7,0,SDRAM0_B1CR
|
|
mtdcr SDRAM0_CFGADDR,r7
|
|
mtdcr SDRAM0_CFGDATA,r6
|
|
|
|
add r6, r6, r15 /* add bank size to base address for next bank */
|
|
|
|
/* Set SDRAM bank 2 register and adjust r6 for next bank */
|
|
/*------------------------------------------------------ */
|
|
b1skip: addi r7,0,SDRAM0_B2CR
|
|
mtdcr SDRAM0_CFGADDR,r7
|
|
mtdcr SDRAM0_CFGDATA,r6
|
|
|
|
add r6, r6, r15 /* add bank size to base address for next bank */
|
|
|
|
/* If two rows/banks then set SDRAM bank 3 register */
|
|
/*------------------------------------------------ */
|
|
cmpi 0, r12, 2
|
|
bne b3skip
|
|
|
|
addi r7,0,SDRAM0_B3CR
|
|
mtdcr SDRAM0_CFGADDR,r7
|
|
mtdcr SDRAM0_CFGDATA,r6
|
|
b3skip:
|
|
|
|
/*----------------------------------------------------------- */
|
|
/* Set RTR */
|
|
/*----------------------------------------------------------- */
|
|
cmpi 0, r30, 1600
|
|
bge rtr_1
|
|
addis r7, 0, 0x05F0 /* RTR value for 100Mhz */
|
|
bl rtr_2
|
|
rtr_1: addis r7, 0, 0x03F8
|
|
rtr_2: addi r4,0,SDRAM0_RTR
|
|
mtdcr SDRAM0_CFGADDR,r4
|
|
mtdcr SDRAM0_CFGDATA,r7
|
|
|
|
/*----------------------------------------------------------- */
|
|
/* Delay to ensure 200usec have elapsed since reset. Assume worst */
|
|
/* case that the core is running 200Mhz: */
|
|
/* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
|
|
/*----------------------------------------------------------- */
|
|
addis r3,0,0x0000
|
|
ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
|
|
mtctr r3
|
|
..spinlp2:
|
|
bdnz ..spinlp2 /* spin loop */
|
|
|
|
/*----------------------------------------------------------- */
|
|
/* Set memory controller options reg, MCOPT1. */
|
|
/* Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst */
|
|
/* read/prefetch. */
|
|
/*----------------------------------------------------------- */
|
|
addi r4,0,SDRAM0_CFG
|
|
mtdcr SDRAM0_CFGADDR,r4
|
|
addis r4,0,0x80C0 /* set DC_EN=1 */
|
|
ori r4,r4,0x0000
|
|
mtdcr SDRAM0_CFGDATA,r4
|
|
|
|
|
|
/*----------------------------------------------------------- */
|
|
/* Delay to ensure 10msec have elapsed since reset. This is */
|
|
/* required for the MPC952 to stabalize. Assume worst */
|
|
/* case that the core is running 200Mhz: */
|
|
/* 200,000,000 (cycles/sec) X .010 (sec) = 0x1E8480 cycles */
|
|
/* This delay should occur before accessing SDRAM. */
|
|
/*----------------------------------------------------------- */
|
|
addis r3,0,0x001E
|
|
ori r3,r3,0x8480 /* ensure 10msec have passed since reset */
|
|
mtctr r3
|
|
..spinlp3:
|
|
bdnz ..spinlp3 /* spin loop */
|
|
|
|
/* output SDRAM code on LEDs */
|
|
addi r4, 0, LED_SDRAM_CODE_16
|
|
addis r5, 0, 0x1000
|
|
ori r5, r5, 0x0001
|
|
stb r4,0(r5)
|
|
eieio
|
|
|
|
mtlr r31 /* restore lr */
|
|
blr
|
|
|
|
/*--------------------------------------------------------------------- */
|
|
/* Function: read_spd */
|
|
/* Description: Reads contents of SPD and saves parameters to be used for */
|
|
/* configuration in dedicated registers (see code below). */
|
|
/*--------------------------------------------------------------------- */
|
|
|
|
#define WRITE_I2C(reg,val) \
|
|
addi r3,0,val;\
|
|
addis r4, 0, 0xef60;\
|
|
ori r4, r4, 0x0500 + reg;\
|
|
stb r3, 0(r4);\
|
|
eieio
|
|
|
|
#define READ_I2C(reg) \
|
|
addis r3, 0, 0xef60;\
|
|
ori r3, r3, 0x0500 + reg;\
|
|
lbz r3, 0x0000(r3);\
|
|
eieio
|
|
|
|
read_spd:
|
|
|
|
mflr r5
|
|
|
|
/* Initialize i2c */
|
|
/*--------------- */
|
|
WRITE_I2C(IICLMADR, 0x00) /* clear lo master address */
|
|
WRITE_I2C(IICHMADR, 0x00) /* clear hi master address */
|
|
WRITE_I2C(IICLSADR, 0x00) /* clear lo slave address */
|
|
WRITE_I2C(IICHSADR, 0x00) /* clear hi slave address */
|
|
WRITE_I2C(IICSTS, 0x08) /* update status register */
|
|
WRITE_I2C(IICEXTSTS, 0x8f)
|
|
WRITE_I2C(IIC0_CLKDIV, 0x05)
|
|
WRITE_I2C(IICINTRMSK, 0x00) /* no interrupts */
|
|
WRITE_I2C(IICXFRCNT, 0x00) /* clear transfer count */
|
|
WRITE_I2C(IICXTCNTLSS, 0xf0) /* clear extended control & stat */
|
|
WRITE_I2C(IICMDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB) /* mode control */
|
|
READ_I2C(IICMDCNTL)
|
|
ori r3, r3, IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL
|
|
WRITE_I2C(IICMDCNTL, r3) /* mode control */
|
|
WRITE_I2C(IICCNTL, 0x00) /* clear control reg */
|
|
|
|
/* Wait until initialization completed */
|
|
/*------------------------------------ */
|
|
bl wait_i2c_transfer_done
|
|
|
|
WRITE_I2C(IICHMADR, 0x00) /* 7-bit addressing */
|
|
WRITE_I2C(IICLMADR, SDRAM_SPD_WRITE_ADDRESS)
|
|
|
|
/* Write 0 into buffer(start address) */
|
|
/*----------------------------------- */
|
|
WRITE_I2C(IICMDBUF, 0x00);
|
|
|
|
/* Wait a little */
|
|
/*-------------- */
|
|
addis r3,0,0x0000
|
|
ori r3,r3,0xA000
|
|
mtctr r3
|
|
in02: bdnz in02
|
|
|
|
/* Issue write command */
|
|
/*-------------------- */
|
|
WRITE_I2C(IICCNTL, IIC_CNTL_PT)
|
|
bl wait_i2c_transfer_done
|
|
|
|
/* Read 128 bytes */
|
|
/*--------------- */
|
|
addi r7, 0, 0 /* byte counter in r7 */
|
|
addi r8, 0, 0 /* checksum in r8 */
|
|
rdlp:
|
|
/* issue read command */
|
|
/*------------------- */
|
|
cmpi 0, r7, 127
|
|
blt rd01
|
|
WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_PT)
|
|
bl rd02
|
|
rd01: WRITE_I2C(IICCNTL, IIC_CNTL_READ | IIC_CNTL_CHT | IIC_CNTL_PT)
|
|
rd02: bl wait_i2c_transfer_done
|
|
|
|
/* Fetch byte from buffer */
|
|
/*----------------------- */
|
|
READ_I2C(IICMDBUF)
|
|
|
|
/* Retrieve parameters that are going to be used during configuration. */
|
|
/* Save them in dedicated registers. */
|
|
/*------------------------------------------------------------ */
|
|
cmpi 0, r7, 3 /* Save byte 3 in r10 */
|
|
bne rd10
|
|
addi r10, r3, 0
|
|
rd10: cmpi 0, r7, 4 /* Save byte 4 in r11 */
|
|
bne rd11
|
|
addi r11, r3, 0
|
|
rd11: cmpi 0, r7, 5 /* Save byte 5 in r12 */
|
|
bne rd12
|
|
addi r12, r3, 0
|
|
rd12: cmpi 0, r7, 17 /* Save byte 17 in r13 */
|
|
bne rd13
|
|
addi r13, r3, 0
|
|
rd13: cmpi 0, r7, 18 /* Save byte 18 in r14 */
|
|
bne rd14
|
|
addi r14, r3, 0
|
|
rd14: cmpi 0, r7, 31 /* Save byte 31 in r15 */
|
|
bne rd15
|
|
addi r15, r3, 0
|
|
rd15: cmpi 0, r7, 27 /* Save byte 27 in r16 */
|
|
bne rd16
|
|
addi r16, r3, 0
|
|
rd16: cmpi 0, r7, 29 /* Save byte 29 in r17 */
|
|
bne rd17
|
|
addi r17, r3, 0
|
|
rd17: cmpi 0, r7, 30 /* Save byte 30 in r18 */
|
|
bne rd18
|
|
addi r18, r3, 0
|
|
rd18: cmpi 0, r7, 9 /* Save byte 9 in r19 */
|
|
bne rd19
|
|
addi r19, r3, 0
|
|
rd19: cmpi 0, r7, 23 /* Save byte 23 in r20 */
|
|
bne rd20
|
|
addi r20, r3, 0
|
|
rd20: cmpi 0, r7, 25 /* Save byte 25 in r21 */
|
|
bne rd21
|
|
addi r21, r3, 0
|
|
rd21:
|
|
|
|
/* Calculate checksum of the first 63 bytes */
|
|
/*----------------------------------------- */
|
|
cmpi 0, r7, 63
|
|
bgt rd31
|
|
beq rd30
|
|
add r8, r8, r3
|
|
bl rd31
|
|
|
|
/* Verify checksum at byte 63 */
|
|
/*--------------------------- */
|
|
rd30: andi. r8, r8, 0xff /* use only 8 bits */
|
|
cmp 0, r8, r3
|
|
beq rd31
|
|
addi r4, 0, LED_SDRAM_CODE_8
|
|
addis r5, 0, 0x1000
|
|
ori r5, r5, 0x0001
|
|
stb r4,0(r5)
|
|
eieio
|
|
rderr: bl rderr
|
|
|
|
rd31:
|
|
|
|
/* Increment byte counter and check whether all bytes have been read. */
|
|
/*------------------------------------------------------------------- */
|
|
addi r7, r7, 1
|
|
cmpi 0, r7, 127
|
|
bgt rd05
|
|
bl rdlp
|
|
rd05:
|
|
mtlr r5 /* restore lr */
|
|
blr
|
|
|
|
wait_i2c_transfer_done:
|
|
mflr r6
|
|
wt01: READ_I2C(IICSTS)
|
|
andi. r4, r3, IIC_STS_PT
|
|
cmpi 0, r4, IIC_STS_PT
|
|
beq wt01
|
|
mtlr r6 /* restore lr */
|
|
blr
|
|
|
|
/*--------------------------------------------------------------------- */
|
|
/* Function: find_mode */
|
|
/* Description: Determines addressing mode to be used dependent on */
|
|
/* number of rows (r10 = byte 3 from SPD), number of columns (r11 = */
|
|
/* byte 4 from SPD) and number of banks (r13 = byte 17 from SPD). */
|
|
/* mode is returned in r3. */
|
|
/* (It would be nicer having a table, pnc). */
|
|
/*--------------------------------------------------------------------- */
|
|
find_mode:
|
|
|
|
mflr r5
|
|
|
|
cmpi 0, r10, 11
|
|
bne fm01
|
|
cmpi 0, r11, 9
|
|
bne fm01
|
|
cmpi 0, r13, 2
|
|
bne fm01
|
|
addi r3, 0, 1
|
|
bl fmfound
|
|
|
|
fm01: cmpi 0, r10, 11
|
|
bne fm02
|
|
cmpi 0, r11, 10
|
|
bne fm02
|
|
cmpi 0, r13, 2
|
|
bne fm02
|
|
addi r3, 0, 1
|
|
bl fmfound
|
|
|
|
fm02: cmpi 0, r10, 12
|
|
bne fm03
|
|
cmpi 0, r11, 9
|
|
bne fm03
|
|
cmpi 0, r13, 4
|
|
bne fm03
|
|
addi r3, 0, 2
|
|
bl fmfound
|
|
|
|
fm03: cmpi 0, r10, 12
|
|
bne fm04
|
|
cmpi 0, r11, 10
|
|
bne fm04
|
|
cmpi 0, r13, 4
|
|
bne fm04
|
|
addi r3, 0, 2
|
|
bl fmfound
|
|
|
|
fm04: cmpi 0, r10, 13
|
|
bne fm05
|
|
cmpi 0, r11, 9
|
|
bne fm05
|
|
cmpi 0, r13, 4
|
|
bne fm05
|
|
addi r3, 0, 3
|
|
bl fmfound
|
|
|
|
fm05: cmpi 0, r10, 13
|
|
bne fm06
|
|
cmpi 0, r11, 10
|
|
bne fm06
|
|
cmpi 0, r13, 4
|
|
bne fm06
|
|
addi r3, 0, 3
|
|
bl fmfound
|
|
|
|
fm06: cmpi 0, r10, 13
|
|
bne fm07
|
|
cmpi 0, r11, 11
|
|
bne fm07
|
|
cmpi 0, r13, 4
|
|
bne fm07
|
|
addi r3, 0, 3
|
|
bl fmfound
|
|
|
|
fm07: cmpi 0, r10, 12
|
|
bne fm08
|
|
cmpi 0, r11, 8
|
|
bne fm08
|
|
cmpi 0, r13, 2
|
|
bne fm08
|
|
addi r3, 0, 4
|
|
bl fmfound
|
|
|
|
fm08: cmpi 0, r10, 12
|
|
bne fm09
|
|
cmpi 0, r11, 8
|
|
bne fm09
|
|
cmpi 0, r13, 4
|
|
bne fm09
|
|
addi r3, 0, 4
|
|
bl fmfound
|
|
|
|
fm09: cmpi 0, r10, 11
|
|
bne fm10
|
|
cmpi 0, r11, 8
|
|
bne fm10
|
|
cmpi 0, r13, 2
|
|
bne fm10
|
|
addi r3, 0, 5
|
|
bl fmfound
|
|
|
|
fm10: cmpi 0, r10, 11
|
|
bne fm11
|
|
cmpi 0, r11, 8
|
|
bne fm11
|
|
cmpi 0, r13, 4
|
|
bne fm11
|
|
addi r3, 0, 5
|
|
bl fmfound
|
|
|
|
fm11: cmpi 0, r10, 13
|
|
bne fm12
|
|
cmpi 0, r11, 8
|
|
bne fm12
|
|
cmpi 0, r13, 2
|
|
bne fm12
|
|
addi r3, 0, 6
|
|
bl fmfound
|
|
|
|
fm12: cmpi 0, r10, 13
|
|
bne fm13
|
|
cmpi 0, r11, 8
|
|
bne fm13
|
|
cmpi 0, r13, 4
|
|
bne fm13
|
|
addi r3, 0, 6
|
|
bl fmfound
|
|
|
|
fm13: cmpi 0, r10, 13
|
|
bne fm14
|
|
cmpi 0, r11, 9
|
|
bne fm14
|
|
cmpi 0, r13, 2
|
|
bne fm14
|
|
addi r3, 0, 7
|
|
bl fmfound
|
|
|
|
fm14: cmpi 0, r10, 13
|
|
bne fm15
|
|
cmpi 0, r11, 10
|
|
bne fm15
|
|
cmpi 0, r13, 2
|
|
bne fm15
|
|
addi r3, 0, 7
|
|
bl fmfound
|
|
|
|
fm15:
|
|
/* not found, error code to be issued on LEDs */
|
|
addi r7, 0, LED_SDRAM_CODE_2
|
|
addis r6, 0, 0x1000
|
|
ori r6, r6, 0x0001
|
|
stb r7,0(r6)
|
|
eieio
|
|
fmerr: bl fmerr
|
|
|
|
fmfound:addi r6, 0, 1
|
|
subf r3, r6, r3
|
|
|
|
mtlr r5 /* restore lr */
|
|
blr
|
|
|
|
/*--------------------------------------------------------------------- */
|
|
/* Function: find_size_code */
|
|
/* Description: Determines size code to be used in configuring SDRAM controller */
|
|
/* dependent on density (r15 = byte 31 from SPD) */
|
|
/*--------------------------------------------------------------------- */
|
|
find_size_code:
|
|
|
|
mflr r5
|
|
|
|
addi r3, r15, 0 /* density */
|
|
addi r7, 0, 0
|
|
fs01: andi. r6, r3, 0x01
|
|
cmpi 0, r6, 1
|
|
beq fs04
|
|
|
|
addi r7, r7, 1
|
|
cmpi 0, r7, 7
|
|
bge fs02
|
|
addi r9, 0, 1
|
|
srw r3, r3, r9
|
|
bl fs01
|
|
|
|
/* not found, error code to be issued on LEDs */
|
|
fs02: addi r4, 0, LED_SDRAM_CODE_3
|
|
addis r8, 0, 0x1000
|
|
ori r8, r8, 0x0001
|
|
stb r4,0(r8)
|
|
eieio
|
|
fs03: bl fs03
|
|
|
|
fs04: addi r3, r7, 0
|
|
cmpi 0, r3, 0
|
|
beq fs05
|
|
addi r6, 0, 1
|
|
subf r3, r6, r3
|
|
fs05:
|
|
mtlr r5 /* restore lr */
|
|
blr
|
|
|
|
/*--------------------------------------------------------------------- */
|
|
/* Function: find_casl */
|
|
/* Description: Determines CAS latency */
|
|
/*--------------------------------------------------------------------- */
|
|
find_casl:
|
|
|
|
mflr r5
|
|
|
|
andi. r14, r14, 0x7f /* r14 holds supported CAS latencies */
|
|
addi r3, 0, 0xff /* preset determined CASL */
|
|
addi r4, 0, 6 /* Start at bit 6 of supported CAS latencies */
|
|
addi r2, 0, 0 /* Start finding highest CAS latency */
|
|
|
|
fc01: srw r6, r14, r4 /* */
|
|
andi. r6, r6, 0x01 /* */
|
|
cmpi 0, r6, 1 /* Check bit for current latency */
|
|
bne fc06 /* If not supported, go to next */
|
|
|
|
cmpi 0, r2, 2 /* Check if third-highest latency */
|
|
bge fc04 /* If so, go calculate with another format */
|
|
|
|
cmpi 0, r2, 0 /* Check if highest latency */
|
|
bgt fc02 /* */
|
|
addi r7, r19, 0 /* SDRAM cycle time for highest CAS latenty */
|
|
|
|
bl fc03
|
|
fc02:
|
|
addi r7, r20, 0 /* SDRAM cycle time for next-highest CAS latenty */
|
|
fc03:
|
|
addi r8, r7, 0
|
|
addi r9, 0, 4
|
|
srw r7, r7, r9
|
|
andi. r7, r7, 0x0f
|
|
mulli r7, r7, 100
|
|
andi. r8, r8, 0x0f
|
|
mulli r8, r8, 10
|
|
add r7, r7, r8
|
|
cmp 0, r7, r30
|
|
bgt fc05
|
|
addi r3, r2, 0
|
|
bl fc05
|
|
fc04:
|
|
addi r7, r21, 0 /* SDRAM cycle time for third-highest CAS latenty */
|
|
addi r8, r7, 0
|
|
addi r9, 0, 2
|
|
srw r7, r7, r9
|
|
andi. r7, r7, 0x3f
|
|
mulli r7, r7, 100
|
|
andi. r8, r8, 0x03
|
|
mulli r8, r8, 25
|
|
add r7, r7, r8
|
|
|
|
cmp 0, r7, r30
|
|
bgt fc05
|
|
addi r3, r2, 0
|
|
|
|
fc05: addi r2, r2, 1 /* next latency */
|
|
cmpi 0, r2, 3
|
|
bge fc07
|
|
fc06: addi r6, 0, 1
|
|
subf r4, r6, r4
|
|
cmpi 0, r4, 0
|
|
bne fc01
|
|
|
|
fc07:
|
|
|
|
mtlr r5 /* restore lr */
|
|
blr
|
|
#endif
|
|
|
|
|
|
/* Peripheral Bank 1 Access Parameters */
|
|
/* 0 BME = 1 ; burstmode enabled */
|
|
/* " 1:8" TWT=00110110 ;Transfer wait (details below) */
|
|
/* 1:5 FWT=00110 ; first wait = 6 cycles */
|
|
/* 6:8 BWT=110 ; burst wait = 6 cycles */
|
|
/* 9:11 000 ; reserved */
|
|
/* 12:13 CSN=00 ; chip select on timing = 0 */
|
|
/* 14:15 OEN=01 ; output enable */
|
|
/* 16:17 WBN=01 ; write byte enable on timing 1 cycle */
|
|
/* 18:19 WBF=01 ; write byte enable off timing 1 cycle */
|
|
/* 20:22 TH=010 ; transfer hold = 2 cycles */
|
|
/* 23 RE=0 ; ready enable = disabled */
|
|
/* 24 SOR=1 ; sample on ready = same PerClk */
|
|
/* 25 BEM=0 ; byte enable mode = only for write cycles */
|
|
/* 26 PEN=0 ; parity enable = disable */
|
|
/* 27:31 00000 ;reserved */
|
|
/* */
|
|
/* 1 + 00110 + 110 + 000 + 00 + 01 + 01 + 01 + 010 + 0 + 1 + 0 + 0 + 00000 = 0x9b015480 */
|
|
/* */
|
|
/* */
|
|
/* Code for BDI probe: */
|
|
/* */
|
|
/* WDCR 18 0x00000011 ;Select PB1AP */
|
|
/* WDCR 19 0x1b015480 ;PB1AP: Flash */
|
|
/* */
|
|
/* Peripheral Bank 0 Access Parameters */
|
|
/* 0:11 BAS=0x200 ; base address select = 0x200 * 0x100000 (1MB) = */
|
|
/* 12:14 BS=100 ; bank size = 16MB (100) / 32MB (101) */
|
|
/* 15:16 BU=11 ; bank usage = read/write */
|
|
/* 17:18 BW=00 ; bus width = 8-bit */
|
|
/* 19:31 ; reserved */
|
|
/* */
|
|
/* 0x200 + 100 + 11 + 00 + 0 0000 0000 0000 = 0x20098000 */
|
|
/* WDCR 18 0x00000001 ;Select PB1CR */
|
|
/* WDCR 19 0x20098000 ;PB1CR: 1MB at 0x00100000, r/w, 8bit */
|
|
|
|
/* For CPLD */
|
|
/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 1 + 0 + 00000 */
|
|
/* WDCR_EBC(PB5AP, 0x01010040) */
|
|
/*jsa recommendation: WDCR_EBC(PB5AP, 0x00010040) */
|
|
/* WDCR_EBC(PB5CR, 0X10018000) */
|
|
/* Access parms */
|
|
/* 100 3 8 0 0 0 */
|
|
/* 0x100 + 001 + 11 + 00 + 0 0000 0000 0000 = 0x10038000 */
|
|
/* Address : 0x10000000 */
|
|
/* Size: 2 MB */
|
|
/* Usage: read/write */
|
|
/* Width: 32 bit */
|
|
|
|
/* For Genie onboard fpga 32 bit interface */
|
|
/* 0 1 0 1 0 0 0 0 */
|
|
/* 0 + 00000 + 010 + 000 + 00 + 01 + 00 + 00 + 000 + 0 + 0 + 0 + 0 + 00000 */
|
|
/* 0x01010000 */
|
|
/* Access parms */
|
|
/* 102 1 c 0 0 0 */
|
|
/* 0x102 + 000 + 11 + 10 + 0 0000 0000 0000 = 0x1021c000 */
|
|
/* Address : 0x10200000 */
|
|
/* Size: 2 MB */
|
|
/* Usage: read/write */
|
|
/* Width: 32 bit */
|
|
|
|
/* Walnut fpga PB7AP */
|
|
/* 0 1 8 1 5 2 8 0 */
|
|
/* 0 + 00000 + 011 + 000 + 00 + 01 + 01 + 01 + 001 + 0 + 1 + 0 + 0 + 00000 */
|
|
/* Walnut fpga PB7CR */
|
|
/* 0xF0318000 */
|
|
/* */
|
|
|