upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
360 lines
8.9 KiB
360 lines
8.9 KiB
/*
|
|
* Copyright (C) 2004 IMMS gGmbH <www.imms.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
* author(s): Thomas Elste, <info@elste.org>
|
|
* (some parts derived from uCLinux Netarm Ethernet Driver)
|
|
*/
|
|
|
|
|
|
#include <common.h>
|
|
|
|
#ifdef CONFIG_DRIVER_NETARMETH
|
|
#include <command.h>
|
|
#include <net.h>
|
|
#include "netarm_eth.h"
|
|
#include <asm/arch/netarm_registers.h>
|
|
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
|
|
|
|
static int na_mii_poll_busy (void);
|
|
|
|
static void na_get_mac_addr (void)
|
|
{
|
|
unsigned short p[3];
|
|
char *m_addr;
|
|
char ethaddr[20];
|
|
|
|
m_addr = (char *) p;
|
|
|
|
p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1);
|
|
p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2);
|
|
p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3);
|
|
|
|
sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
|
|
m_addr[0], m_addr[1],
|
|
m_addr[2], m_addr[3], m_addr[4], m_addr[5]);
|
|
|
|
printf ("HW-MAC Address: %s\n", ethaddr);
|
|
|
|
/* set env, todo: check if already an adress is set */
|
|
setenv ("ethaddr", ethaddr);
|
|
}
|
|
|
|
|
|
static void na_mii_write (int reg, int value)
|
|
{
|
|
int mii_addr;
|
|
|
|
/* Select register */
|
|
mii_addr = CFG_ETH_PHY_ADDR + reg;
|
|
SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
|
|
/* Write value */
|
|
SET_EADDR (NETARM_ETH_MII_WRITE, value);
|
|
na_mii_poll_busy ();
|
|
}
|
|
|
|
static unsigned int na_mii_read (int reg)
|
|
{
|
|
int mii_addr, val;
|
|
|
|
/* Select register */
|
|
mii_addr = CFG_ETH_PHY_ADDR + reg;
|
|
SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
|
|
/* do one management cycle */
|
|
SET_EADDR (NETARM_ETH_MII_CMD,
|
|
GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT);
|
|
na_mii_poll_busy ();
|
|
/* Return read value */
|
|
val = GET_EADDR (NETARM_ETH_MII_READ);
|
|
return val;
|
|
}
|
|
|
|
static int na_mii_poll_busy (void)
|
|
{
|
|
/* arm simple, non interrupt dependent timer */
|
|
reset_timer_masked ();
|
|
while (get_timer_masked () < NA_MII_POLL_BUSY_DELAY) {
|
|
if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) {
|
|
return 1;
|
|
}
|
|
}
|
|
printf ("na_mii_busy timeout\n");
|
|
return (0);
|
|
}
|
|
|
|
static int na_mii_identify_phy (void)
|
|
{
|
|
int id_reg_a = 0;
|
|
|
|
/* get phy id register */
|
|
id_reg_a = na_mii_read (MII_PHY_ID);
|
|
|
|
if (id_reg_a == 0x0043) {
|
|
/* This must be an Enable or a Lucent LU3X31 PHY chip */
|
|
return 1;
|
|
} else if (id_reg_a == 0x0013) {
|
|
/* it is an Intel LXT971A */
|
|
return 1;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static int na_mii_negotiate (void)
|
|
{
|
|
int i = 0;
|
|
|
|
/* Enable auto-negotiation */
|
|
na_mii_write (MII_PHY_AUTONEGADV, 0x01e1);
|
|
/* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */
|
|
/* Restart auto-negotiation */
|
|
na_mii_write (MII_PHY_CONTROL, 0x1200);
|
|
|
|
/* status register is 0xffff after setting the autoneg restart bit */
|
|
while (na_mii_read (MII_PHY_STATUS) == 0xffff) {
|
|
i++;
|
|
}
|
|
|
|
/* na_mii_read uses the timer already, so we can't use it again for
|
|
timeout checking.
|
|
Instead we just try some times.
|
|
*/
|
|
for (i = 0; i < 40000; i++) {
|
|
if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) {
|
|
return 0;
|
|
}
|
|
}
|
|
/*
|
|
printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS));
|
|
*/
|
|
return (1);
|
|
}
|
|
|
|
static unsigned int na_mii_check_speed (void)
|
|
{
|
|
unsigned int status;
|
|
|
|
/* Read Status register */
|
|
status = na_mii_read (MII_PHY_STATUS);
|
|
/* Check link status. If 0, default to 100 Mbps. */
|
|
if ((status & 0x0004) == 0) {
|
|
printf ("*Warning* no link detected, set default speed to 100Mbs\n");
|
|
return 1;
|
|
} else {
|
|
if ((na_mii_read (17) & 0x4000) != 0) {
|
|
printf ("100Mbs link detected\n");
|
|
return 1;
|
|
} else {
|
|
printf ("10Mbs link detected\n");
|
|
return 0;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int reset_eth (void)
|
|
{
|
|
int pt;
|
|
|
|
na_get_mac_addr ();
|
|
pt = na_mii_identify_phy ();
|
|
|
|
/* reset the phy */
|
|
na_mii_write (MII_PHY_CONTROL, 0x8000);
|
|
reset_timer_masked ();
|
|
while (get_timer_masked () < NA_MII_NEGOTIATE_DELAY) {
|
|
if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) {
|
|
break;
|
|
}
|
|
}
|
|
if (get_timer_masked () >= NA_MII_NEGOTIATE_DELAY)
|
|
printf ("phy reset timeout\n");
|
|
|
|
/* set the PCS reg */
|
|
SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M |
|
|
NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR);
|
|
|
|
na_mii_negotiate ();
|
|
na_mii_check_speed ();
|
|
|
|
/* Delay 10 millisecond. (Maybe this should be 1 second.) */
|
|
udelay (10000);
|
|
|
|
/* Turn receive on.
|
|
Enable statistics register autozero on read.
|
|
Do not insert MAC address on transmit.
|
|
Do not enable special test modes. */
|
|
SET_EADDR (NETARM_ETH_STL_CFG,
|
|
(NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN));
|
|
|
|
/* Set the inter-packet gap delay to 0.96us for MII.
|
|
The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG
|
|
Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG
|
|
Gap Timer Register should be set to 0x00000C12 for the MII PHY. */
|
|
SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15);
|
|
SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12);
|
|
|
|
/* Add CRC to end of packets.
|
|
Pad packets to minimum length of 64 bytes.
|
|
Allow unlimited length transmit packets.
|
|
Receive all broadcast packets.
|
|
NOTE: Multicast addressing is NOT enabled here currently. */
|
|
SET_EADDR (NETARM_ETH_MAC_CFG,
|
|
(NETARM_ETH_MACC_CRCEN |
|
|
NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN));
|
|
SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD);
|
|
|
|
/* enable fifos */
|
|
SET_EADDR (NETARM_ETH_GEN_CTRL,
|
|
(NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX));
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
extern int eth_init (bd_t * bd)
|
|
{
|
|
reset_eth ();
|
|
return 0;
|
|
}
|
|
|
|
extern void eth_halt (void)
|
|
{
|
|
SET_EADDR (NETARM_ETH_GEN_CTRL, 0);
|
|
}
|
|
|
|
/* Get a data block via Ethernet */
|
|
extern int eth_rx (void)
|
|
{
|
|
int i;
|
|
unsigned short rxlen;
|
|
unsigned int *addr;
|
|
unsigned int rxstatus, lastrxlen;
|
|
char *pa;
|
|
|
|
/* RXBR is 1, data block was received */
|
|
if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0)
|
|
return 0;
|
|
|
|
/* get status register and the length of received block */
|
|
rxstatus = GET_EADDR (NETARM_ETH_RX_STAT);
|
|
rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16;
|
|
|
|
if (rxlen == 0)
|
|
return 0;
|
|
|
|
/* clear RXBR to make fifo available */
|
|
SET_EADDR (NETARM_ETH_GEN_STAT,
|
|
GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR);
|
|
|
|
/* clear TXBC to make fifo available */
|
|
/* According to NETARM50 data manual you just have to clear
|
|
RXBR but that has no effect. Only after clearing TXBC the
|
|
Fifo becomes readable. */
|
|
SET_EADDR (NETARM_ETH_GEN_STAT,
|
|
GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC);
|
|
|
|
addr = (unsigned int *) NetRxPackets[0];
|
|
pa = (char *) NetRxPackets[0];
|
|
|
|
/* read the fifo */
|
|
for (i = 0; i < rxlen / 4; i++) {
|
|
*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
|
|
addr++;
|
|
}
|
|
|
|
if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) {
|
|
/* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
|
|
lastrxlen =
|
|
(GET_EADDR (NETARM_ETH_GEN_STAT) &
|
|
NETARM_ETH_GST_RXFDB) >> 28;
|
|
*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
|
|
switch (lastrxlen) {
|
|
case 1:
|
|
*addr &= 0xff000000;
|
|
break;
|
|
case 2:
|
|
*addr &= 0xffff0000;
|
|
break;
|
|
case 3:
|
|
*addr &= 0xffffff00;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Pass the packet up to the protocol layers. */
|
|
NetReceive (NetRxPackets[0], rxlen);
|
|
|
|
return rxlen;
|
|
}
|
|
|
|
/* Send a data block via Ethernet. */
|
|
extern int eth_send (volatile void *packet, int length)
|
|
{
|
|
int i, length32;
|
|
char *pa;
|
|
unsigned int *pa32, lastp = 0, rest;
|
|
|
|
pa = (char *) packet;
|
|
pa32 = (unsigned int *) packet;
|
|
length32 = length / 4;
|
|
rest = length % 4;
|
|
|
|
/* make sure there's no garbage in the last word */
|
|
switch (rest) {
|
|
case 0:
|
|
lastp = pa32[length32];
|
|
length32--;
|
|
break;
|
|
case 1:
|
|
lastp = pa32[length32] & 0x000000ff;
|
|
break;
|
|
case 2:
|
|
lastp = pa32[length32] & 0x0000ffff;
|
|
break;
|
|
case 3:
|
|
lastp = pa32[length32] & 0x00ffffff;
|
|
break;
|
|
}
|
|
|
|
/* write to the fifo */
|
|
for (i = 0; i < length32; i++)
|
|
SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]);
|
|
|
|
/* the last word is written to an extra register, this
|
|
starts the transmission */
|
|
SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp);
|
|
|
|
/* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission
|
|
went fine. But we can't use the timer for a timeout loop because
|
|
of it is used already in upper layers. So we just try some times. */
|
|
i = 0;
|
|
while (i < 50000) {
|
|
if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK)
|
|
== NETARM_ETH_TXSTAT_TXOK)
|
|
return 0;
|
|
i++;
|
|
}
|
|
|
|
printf ("eth_send timeout\n");
|
|
return 1;
|
|
}
|
|
|
|
#endif /* COMMANDS & CFG_NET */
|
|
|
|
#endif /* CONFIG_DRIVER_NETARMETH */
|
|
|