upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
214 lines
7.2 KiB
214 lines
7.2 KiB
/******************************************************************************
|
|
* This source code is dual-licensed. You may use it under the terms of the
|
|
* GNU General Public License version 2, or under the license below.
|
|
*
|
|
* This source code has been made available to you by IBM on an AS-IS
|
|
* basis. Anyone receiving this source is licensed under IBM
|
|
* copyrights to use it in any way he or she deems fit, including
|
|
* copying it, modifying it, compiling it, and redistributing it either
|
|
* with or without modifications. No license under IBM patents or
|
|
* patent applications is to be implied by the copyright license.
|
|
*
|
|
* Any user of this software should understand that IBM cannot provide
|
|
* technical support for this software and will not be responsible for
|
|
* any consequences resulting from the use of this software.
|
|
*
|
|
* Any person who transfers this source code or any derivative work
|
|
* must include the IBM copyright notice, this paragraph, and the
|
|
* preceding two paragraphs in the transferred software.
|
|
*
|
|
* COPYRIGHT I B M CORPORATION 1995
|
|
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
*
|
|
*****************************************************************************/
|
|
#include <config.h>
|
|
#include <ppc4xx.h>
|
|
|
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
#define LI32(reg,val) \
|
|
addis reg,0,val@h;\
|
|
ori reg,reg,val@l
|
|
|
|
#define WDCR_EBC(reg,val) \
|
|
addi r4,0,reg;\
|
|
mtdcr ebccfga,r4;\
|
|
addis r4,0,val@h;\
|
|
ori r4,r4,val@l;\
|
|
mtdcr ebccfgd,r4
|
|
|
|
#define WDCR_SDRAM(reg,val) \
|
|
addi r4,0,reg;\
|
|
mtdcr memcfga,r4;\
|
|
addis r4,0,val@h;\
|
|
ori r4,r4,val@l;\
|
|
mtdcr memcfgd,r4
|
|
|
|
/******************************************************************************
|
|
* Function: ext_bus_cntlr_init
|
|
*
|
|
* Description: Configures EBC Controller and a few basic chip selects.
|
|
*
|
|
* CS0 is setup to get the Boot Flash out of the addresss range
|
|
* so that we may setup a stack. CS7 is setup so that we can
|
|
* access and reset the hardware watchdog.
|
|
*
|
|
* IMPORTANT: For pass1 this code must run from
|
|
* cache since you can not reliably change a peripheral banks
|
|
* timing register (pbxap) while running code from that bank.
|
|
* For ex., since we are running from ROM on bank 0, we can NOT
|
|
* execute the code that modifies bank 0 timings from ROM, so
|
|
* we run it from cache.
|
|
*
|
|
* Notes: Does NOT use the stack.
|
|
*****************************************************************************/
|
|
.section ".text"
|
|
.align 2
|
|
.globl ext_bus_cntlr_init
|
|
.type ext_bus_cntlr_init, @function
|
|
ext_bus_cntlr_init:
|
|
mflr r0
|
|
/********************************************************************
|
|
* Prefetch entire ext_bus_cntrl_init function into the icache.
|
|
* This is necessary because we are going to change the same CS we
|
|
* are executing from. Otherwise a CPU lockup may occur.
|
|
*******************************************************************/
|
|
bl ..getAddr
|
|
..getAddr:
|
|
mflr r3 /* get address of ..getAddr */
|
|
|
|
/* Calculate number of cache lines for this function */
|
|
addi r4, 0, (((.Lfe0 - ..getAddr) / CONFIG_SYS_CACHELINE_SIZE) + 2)
|
|
mtctr r4
|
|
..ebcloop:
|
|
icbt r0, r3 /* prefetch cache line for addr in r3*/
|
|
addi r3, r3, CONFIG_SYS_CACHELINE_SIZE /* move to next cache line */
|
|
bdnz ..ebcloop /* continue for $CTR cache lines */
|
|
|
|
/********************************************************************
|
|
* Delay to ensure all accesses to ROM are complete before changing
|
|
* bank 0 timings. 200usec should be enough.
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles.
|
|
*******************************************************************/
|
|
addis r3, 0, 0x0
|
|
ori r3, r3, 0xA000 /* wait 200us from reset */
|
|
mtctr r3
|
|
..spinlp:
|
|
bdnz ..spinlp /* spin loop */
|
|
|
|
/********************************************************************
|
|
* SETUP CPC0_CR0
|
|
*******************************************************************/
|
|
LI32(r4, 0x00c01030)
|
|
mtdcr cntrl0, r4
|
|
|
|
/********************************************************************
|
|
* Setup CPC0_CR1: Change PCIINT signal to PerWE
|
|
*******************************************************************/
|
|
mfdcr r4, cntrl1
|
|
ori r4, r4, 0x4000
|
|
mtdcr cntrl1, r4
|
|
|
|
/********************************************************************
|
|
* Setup External Bus Controller (EBC).
|
|
*******************************************************************/
|
|
WDCR_EBC(epcr, 0xd84c0000)
|
|
/********************************************************************
|
|
* Memory Bank 0 (Intel 28F640J3 Flash) initialization
|
|
*******************************************************************/
|
|
/*WDCR_EBC(pb0ap, 0x03055200)*/
|
|
/*WDCR_EBC(pb0ap, 0x04055200)*/
|
|
WDCR_EBC(pb0ap, 0x08055200)
|
|
WDCR_EBC(pb0cr, 0xff87a000)
|
|
/********************************************************************
|
|
* Memory Bank 3 (Xilinx XC95144 CPLD) initialization
|
|
*******************************************************************/
|
|
/*WDCR_EBC(pb3ap, 0x07869200)*/
|
|
WDCR_EBC(pb3ap, 0x04055200)
|
|
WDCR_EBC(pb3cr, 0xf081c000)
|
|
/********************************************************************
|
|
* Memory Bank 1,2,4-7 (Unused) initialization
|
|
*******************************************************************/
|
|
WDCR_EBC(pb1ap, 0)
|
|
WDCR_EBC(pb1cr, 0)
|
|
WDCR_EBC(pb2ap, 0)
|
|
WDCR_EBC(pb2cr, 0)
|
|
WDCR_EBC(pb4ap, 0)
|
|
WDCR_EBC(pb4cr, 0)
|
|
WDCR_EBC(pb5ap, 0)
|
|
WDCR_EBC(pb5cr, 0)
|
|
WDCR_EBC(pb6ap, 0)
|
|
WDCR_EBC(pb6cr, 0)
|
|
WDCR_EBC(pb7ap, 0)
|
|
WDCR_EBC(pb7cr, 0)
|
|
|
|
/* We are all done */
|
|
mtlr r0 /* Restore link register */
|
|
blr /* Return to calling function */
|
|
.Lfe0: .size ext_bus_cntlr_init,.Lfe0-ext_bus_cntlr_init
|
|
/* end ext_bus_cntlr_init() */
|
|
|
|
/******************************************************************************
|
|
* Function: sdram_init
|
|
*
|
|
* Description: Configures SDRAM memory banks.
|
|
*
|
|
* Notes: Does NOT use the stack.
|
|
*****************************************************************************/
|
|
.section ".text"
|
|
.align 2
|
|
.globl sdram_init
|
|
.type sdram_init, @function
|
|
sdram_init:
|
|
|
|
/*
|
|
* Disable memory controller to allow
|
|
* values to be changed.
|
|
*/
|
|
WDCR_SDRAM(mem_mcopt1, 0x00000000)
|
|
|
|
/*
|
|
* Configure Memory Banks
|
|
*/
|
|
WDCR_SDRAM(mem_mb0cf, 0x00062001)
|
|
WDCR_SDRAM(mem_mb1cf, 0x00000000)
|
|
WDCR_SDRAM(mem_mb2cf, 0x00000000)
|
|
WDCR_SDRAM(mem_mb3cf, 0x00000000)
|
|
|
|
/*
|
|
* Set up SDTR1 (SDRAM Timing Register)
|
|
*/
|
|
WDCR_SDRAM(mem_sdtr1, 0x00854009)
|
|
|
|
/*
|
|
* Set RTR (Refresh Timing Register)
|
|
*/
|
|
WDCR_SDRAM(mem_rtr, 0x10000000)
|
|
/* WDCR_SDRAM(mem_rtr, 0x05f00000) */
|
|
|
|
/********************************************************************
|
|
* Delay to ensure 200usec have elapsed since reset. Assume worst
|
|
* case that the core is running 200Mhz:
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
|
|
*******************************************************************/
|
|
addis r3, 0, 0x0000
|
|
ori r3, r3, 0xA000 /* Wait >200us from reset */
|
|
mtctr r3
|
|
..spinlp2:
|
|
bdnz ..spinlp2 /* spin loop */
|
|
|
|
/********************************************************************
|
|
* Set memory controller options reg, MCOPT1.
|
|
*******************************************************************/
|
|
WDCR_SDRAM(mem_mcopt1,0x80800000)
|
|
|
|
..sdri_done:
|
|
blr /* Return to calling function */
|
|
.Lfe1: .size sdram_init,.Lfe1-sdram_init
|
|
/* end sdram_init() */
|
|
|