upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
260 lines
6.9 KiB
260 lines
6.9 KiB
/*
|
|
* (C) Copyright 2007-2009 DENX Software Engineering
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/bitops.h>
|
|
#include <command.h>
|
|
#include <asm/io.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mpc512x.h>
|
|
#include <fdt_support.h>
|
|
#ifdef CONFIG_MISC_INIT_R
|
|
#include <i2c.h>
|
|
#endif
|
|
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/nand.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/* Clocks in use */
|
|
#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \
|
|
CLOCK_SCCR1_DDR_EN | \
|
|
CLOCK_SCCR1_FEC_EN | \
|
|
CLOCK_SCCR1_LPC_EN | \
|
|
CLOCK_SCCR1_NFC_EN | \
|
|
CLOCK_SCCR1_PATA_EN | \
|
|
CLOCK_SCCR1_PCI_EN | \
|
|
CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \
|
|
CLOCK_SCCR1_PSCFIFO_EN | \
|
|
CLOCK_SCCR1_TPR_EN)
|
|
|
|
#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \
|
|
CLOCK_SCCR2_I2C_EN | \
|
|
CLOCK_SCCR2_MEM_EN | \
|
|
CLOCK_SCCR2_SPDIF_EN)
|
|
|
|
void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip);
|
|
|
|
/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */
|
|
extern int mpc5121_nfc_chip;
|
|
|
|
/* Control chips select signal on MPC5121ADS board */
|
|
void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
|
|
{
|
|
unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09;
|
|
u8 v;
|
|
|
|
v = in_8(csreg);
|
|
v |= 0x0F;
|
|
|
|
if (chip >= 0) {
|
|
__mpc5121_nfc_select_chip(mtd, 0);
|
|
v &= ~(1 << mpc5121_nfc_chip);
|
|
} else {
|
|
__mpc5121_nfc_select_chip(mtd, -1);
|
|
}
|
|
|
|
out_8(csreg, v);
|
|
}
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 spridr;
|
|
|
|
/*
|
|
* Initialize Local Window for the CPLD registers access (CS2 selects
|
|
* the CPLD chip)
|
|
*/
|
|
out_be32(&im->sysconf.lpcs2aw,
|
|
CSAW_START(CONFIG_SYS_CPLD_BASE) |
|
|
CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE)
|
|
);
|
|
out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG);
|
|
sync_law(&im->sysconf.lpcs2aw);
|
|
|
|
/*
|
|
* Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control
|
|
*
|
|
* Without this the flash identification routine fails, as it needs to issue
|
|
* write commands in order to establish the device ID.
|
|
*/
|
|
|
|
#ifdef CONFIG_ADS5121_REV2
|
|
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
|
|
#else
|
|
if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) {
|
|
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1);
|
|
} else {
|
|
/* running from Backup flash */
|
|
out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32);
|
|
}
|
|
#endif
|
|
/*
|
|
* Configure Flash Speed
|
|
*/
|
|
out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG);
|
|
|
|
spridr = in_be32(&im->sysconf.spridr);
|
|
|
|
if (SVR_MJREV (spridr) >= 2)
|
|
out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING);
|
|
|
|
/*
|
|
* Enable clocks
|
|
*/
|
|
out_be32 (&im->clk.sccr[0], SCCR1_CLOCKS_EN);
|
|
out_be32 (&im->clk.sccr[1], SCCR2_CLOCKS_EN);
|
|
#if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE)
|
|
setbits_be32 (&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
u32 msize = 0;
|
|
|
|
msize = fixed_sdram();
|
|
|
|
return msize;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
u8 tmp_val;
|
|
|
|
/* Using this for DIU init before the driver in linux takes over
|
|
* Enable the TFP410 Encoder (I2C address 0x38)
|
|
*/
|
|
|
|
i2c_set_bus_num(2);
|
|
tmp_val = 0xBF;
|
|
i2c_write(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
|
|
/* Verify if enabled */
|
|
tmp_val = 0;
|
|
i2c_read(0x38, 0x08, 1, &tmp_val, sizeof(tmp_val));
|
|
debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
|
|
|
|
tmp_val = 0x10;
|
|
i2c_write(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
|
|
/* Verify if enabled */
|
|
tmp_val = 0;
|
|
i2c_read(0x38, 0x0A, 1, &tmp_val, sizeof(tmp_val));
|
|
debug("DVI Encoder Read: 0x%02lx\n", tmp_val);
|
|
|
|
#ifdef CONFIG_FSL_DIU_FB
|
|
# if !(defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE))
|
|
mpc5121_diu_init();
|
|
# endif
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static iopin_t ioregs_init[] = {
|
|
/* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* Set highest Slew on 9 PATA pins */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pata_ce1), 9, 1,
|
|
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC1=FEC_COL Sets Next 15 to FEC pads */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC1=SPDIF_TXCLK */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0,
|
|
IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_i2c1_scl), 2, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC2=DIU CLK */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC2=DIU_HSYNC */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
},
|
|
/* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0,
|
|
IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) |
|
|
IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3)
|
|
}
|
|
};
|
|
|
|
static iopin_t rev2_silicon_pci_ioregs_init[] = {
|
|
/* FUNC0=PCI Sets next 54 to PCI pads */
|
|
{
|
|
offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0,
|
|
IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0)
|
|
}
|
|
};
|
|
|
|
int checkboard (void)
|
|
{
|
|
ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00);
|
|
uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02);
|
|
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
|
|
u32 spridr = in_be32(&im->sysconf.spridr);
|
|
|
|
printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n",
|
|
brd_rev, cpld_rev);
|
|
|
|
/* initialize function mux & slew rate IO inter alia on IO Pins */
|
|
iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init));
|
|
|
|
if (SVR_MJREV (spridr) >= 2)
|
|
iopin_initialize(rev2_silicon_pci_ioregs_init, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
|
|
}
|
|
#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
|
|
|