upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/board/xes/xpedite5370/xpedite5370.c

128 lines
3.2 KiB

/*
* Copyright 2008 Extreme Engineering Solutions, Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <asm/mmu.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
#include <asm/io.h>
#include <asm/cache.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <pca953x.h>
DECLARE_GLOBAL_DATA_PTR;
extern void ft_board_pci_setup(void *blob, bd_t *bd);
int checkboard(void)
{
char *s;
printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME);
printf(" ");
s = getenv("board_rev");
if (s)
printf("Rev %s, ", s);
s = getenv("serial#");
if (s)
printf("Serial# %s, ", s);
s = getenv("board_cfg");
if (s)
printf("Cfg %s", s);
printf("\n");
return 0;
}
static void flash_cs_fixup(void)
{
volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
int flash_sel;
/*
* Print boot dev and swap flash flash chip selects if booted from 2nd
* flash. Swapping chip selects presents user with a common memory
* map regardless of which flash was booted from.
*/
flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) &
CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS));
printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1);
if (flash_sel) {
lbc->br0 = CONFIG_SYS_BR1_PRELIM;
lbc->or0 = CONFIG_SYS_OR1_PRELIM;
lbc->br1 = CONFIG_SYS_BR0_PRELIM;
lbc->or1 = CONFIG_SYS_OR0_PRELIM;
}
}
int board_early_init_r(void)
{
/* Initialize PCA9557 devices */
pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0);
pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0);
pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0);
pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0);
/*
* Remap NOR flash region to caching-inhibited
* so that flash can be erased/programmed properly.
*/
/* Flush d-cache and invalidate i-cache of any FLASH data */
flush_dcache();
invalidate_icache();
/* Invalidate existing TLB entry for NOR flash */
disable_tlb(0);
set_tlb(1, (CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
(CONFIG_SYS_FLASH_BASE2 & 0xf0000000),
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 0, BOOKE_PAGESZ_256M, 1);
flash_cs_fixup();
return 0;
}
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_PCI
ft_board_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
}
#endif
#ifdef CONFIG_MP
extern void cpu_mp_lmb_reserve(struct lmb *lmb);
void board_lmb_reserve(struct lmb *lmb)
{
cpu_mp_lmb_reserve(lmb);
}
#endif