u-boot

upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

History

pekon gupta d016dc42ce mtd: nand: omap: enable BCH ECC scheme using ELM for generic platform BCH8_ECC scheme implemented in omap_gpmc.c driver has following favours +-----------------------------------+-----------------+-----------------+ \|ECC Scheme \| ECC Calculation \| Error Detection \| +-----------------------------------+-----------------+-----------------+ \|OMAP_ECC_BCH8_CODE_HW \|GPMC \|ELM H/W engine \| \|OMAP_ECC_BCH8_CODE_HW_DETECTION_SW \|GPMC \|S/W BCH library \| +-----------------------------------+-----------------+-----------------+ Current implementation limits the BCH8_CODE_HW only for AM33xx device family. (using CONFIG_AM33XX). However, other SoC families (like TI81xx) also have ELM hardware module, and can support ECC error detection using ELM. This patch - removes CONFIG_AM33xx Thus this driver can be reused by all devices having ELM h/w engine. - adds omap_select_ecc_scheme() A common function to handle ecc-scheme related configurations. This can be used both during device-probe and via user-space u-boot commads to change ecc-scheme. During device probe ecc-scheme is selected based on CONFIG_NAND_OMAP_ELM or CONFIG_NAND_OMAP_BCH8 - enables CONFIG_BCH S/W library (lib/bch.c) required by OMAP_ECC_BCHx_CODE_HW_DETECTION_SW is enabled by CONFIG_BCH. - enables CONFIG_SYS_NAND_ONFI_DETECTION for auto-detection of ONFI compliant NAND devices - updates following README doc doc/README.nand board/ti/am335x/README doc/README.omap3 Signed-off-by: Pekon Gupta <pekon@ti.com> [scottwood@freescale.com: fixed unused variable warning] Signed-off-by: Scott Wood <scottwood@freescale.com>		11 years ago
..
DocBook	…
SPI	…
SPL	…
device-tree-bindings	…
driver-model	…
uImage.FIT	…
I2C_Edge_Conditions	…
README.440-DDR-performance	…
README.AMCC-eval-boards-cleanup	…
README.ARM-SoC	…
README.ARM-memory-map	…
README.AVR32	…
README.AVR32-port-muxing	…
README.JFFS2	…
README.JFFS2_NAND	…
README.LED	…
README.LED_display	…
README.MPC866	…
README.Modem	…
README.N1213	…
README.NDS32	…
README.NetConsole	…
README.OFT	…
README.POST	…
README.SNTP	…
README.SPL	…
README.TPL	…
README.VLAN	…
README.VSC3316-3308	…
README.ag102	…
README.arm-caches	…
README.arm-relocation	…
README.arm-unaligned-accesses	…
README.at91	…
README.at91-soc	…
README.atmel_mci	…
README.atmel_pmecc	…
README.autoboot	…
README.b4860qds	…
README.bedbug	…
README.bitbangMII	…
README.blackfin	…
README.bootmenu	…
README.bus_vcxk	…
README.cfi	…
README.commands	…
README.commands.itest	…
README.commands.spl	…
README.console	…
README.davinci	…
README.davinci.nand_spl	…
README.designware_eth	…
README.displaying-bmps	…
README.dns	…
README.drivers.eth	…
README.enetaddr	…
README.ext4	…
README.falcon	…
README.fdt-control	…
README.fec_mxc	…
README.fsl-ddr	…
README.fsl-hwconfig	…
README.fsl_iim	…
README.fuse	…
README.generic_usb_ohci	…
README.gpt	…
README.hwconfig	…
README.idma2intr	…
README.imx5	…
README.imx6	…
README.imx25	…
README.imx27	…
README.imx31	…
README.imximage	…
README.iomux	…
README.kwbimage	…
README.link-local	…
README.lynxkdi	…
README.m68k	…
README.m54418twr	…
README.malta	…
README.marubun-pcmcia	…
README.memory-test	…
README.menu	…
README.mini2440	…
README.mips	…
README.mpc5xx	…
README.mpc74xx	…
README.mpc83xx.ddrecc	…
README.mpc83xxads	…
README.mpc85xx	…
README.mpc85xx-sd-spi-boot	…
README.mpc85xx-spin-table	…
README.mpc85xxads	…
README.mpc85xxcds	…
README.mxc_hab	…
README.mxc_ocotp	…
README.mxs	…
README.mxsimage	…
README.nand	…
README.nand-boot-ppc440	…
README.ne2000	…
README.nokia_rx51	…
README.omap-reset-time	…
README.omap-ulpi-viewport	…
README.omap3	…
README.p1010rdb	…
README.pblimage	…
README.plan9	…
README.ppc440	…
README.pxe	…
README.qemu-mips	…
README.ramboot-ppc85xx	…
README.rmobile	…
README.s5pc1xx	…
README.sata	…
README.sched	…
README.scrapyard	…
README.serial_multi	…
README.sh	…
README.sh7752evb	…
README.sha1	…
README.silent	…
README.spear	…
README.splashprepare	…
README.srio-pcie-boot-corenet	…
README.standalone	…
README.switch_config	…
README.t4240qds	…
README.trace	…
README.ubi	…
README.ublimage	…
README.update	…
README.usb	…
README.vf610	…
README.video	…
README.watchdog	…
README.zfs	…
feature-removal-schedule.txt	…
git-mailrc	…
kwboot.1	…
mkimage.1	…

README.zfs

This patch series adds support for ZFS listing and load to u-boot.

To Enable zfs ls and load commands, modify the board specific config file with
#define CONFIG_CMD_ZFS

Steps to test:

1. After applying the patch, zfs specific commands can be seen
   in the boot loader prompt using
	UBOOT #help

	zfsload- load binary file from a ZFS file system
	zfsls  - list files in a directory (default /)

2. To list the files in zfs pool, device or partition, execute
	zfsls <interface> <dev[:part]> [POOL/@/dir/file]
	For example:
	UBOOT #zfsls mmc 0:5 /rpool/@/usr/bin/

3. To read and load a file from an ZFS formatted partition to RAM, execute
	zfsload <interface> <dev[:part]> [addr] [filename] [bytes]
	For example:
	UBOOT #zfsload mmc 2:2 0x30007fc0 /rpool/@/boot/uImage

References :
	-- ZFS GRUB sources from Solaris GRUB-0.97
	-- GRUB Bazaar repository

Jorgen Lundman <lundman at lundman.net> 2012.