upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support

You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

Wolfgang Denk 64134f0112 Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections ... With recent toolchain versions, some boards would not build because or errors like this one (here for ocotea board when building with ELDK 4.2 beta): ppc_4xx-ld: section .bootpg [fffff000 -> fffff23b] overlaps section .bss [fffee900 -> fffff8ab] For many boards, the .bss section is big enough that it wraps around at the end of the address space (0xFFFFFFFF), so the problem will not be visible unless you use a 64 bit tool chain for development. On some boards however, changes to the code size (due to different optimizations) we bail out with section overlaps like above. The fix is to add the NOLOAD attribute to the .bss and .sbss sections, telling the linker that .bss does not consume any space in the image. Signed-off-by: Wolfgang Denk <wd@denx.de>		17 years ago
..
Makefile	Move "ar" flags to config.mk to allow for silent "make -s"	18 years ago
config.mk	Cleanup (PPC4xx is AMCC now)	20 years ago
flash.c	Major cleanup for AMCC PPC4xx eval boards.	20 years ago
init.S	[PATCH] Use dynamic SDRAM TLB setup on AMCC Ocotea eval board	18 years ago
ocotea.c	ppc4xx: Add pci_pre_init() for 405 boards	18 years ago
ocotea.h	Add support for Ocotea pass 3 with 440GX Rev. F	19 years ago
u-boot.lds	Fix linker scripts: add NOLOAD atribute to .bss/.sbss sections	17 years ago