upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-u8500/hardware.h

110 lines
3.3 KiB

/*
* Copyright (C) ST-Ericsson SA 2009
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
/* Peripheral clusters */
#define U8500_PER3_BASE 0x80000000
#define U8500_PER2_BASE 0x80110000
#define U8500_PER1_BASE 0x80120000
#define U8500_PER4_BASE 0x80150000
#define U8500_PER6_BASE 0xa03c0000
#define U8500_PER7_BASE 0xa03d0000
#define U8500_PER5_BASE 0xa03e0000
/* GPIO */
#define U8500_GPIO0_BASE (U8500_PER1_BASE + 0xE000)
#define U8500_GPIO1_BASE (U8500_PER1_BASE + 0xE000 + 0x80)
#define U8500_GPIO2_BASE (U8500_PER3_BASE + 0xE000)
#define U8500_GPIO3_BASE (U8500_PER3_BASE + 0xE000 + 0x80)
#define U8500_GPIO4_BASE (U8500_PER3_BASE + 0xE000 + 0x100)
#define U8500_GPIO5_BASE (U8500_PER3_BASE + 0xE000 + 0x180)
#define U8500_GPIO6_BASE (U8500_PER2_BASE + 0xE000)
#define U8500_GPIO7_BASE (U8500_PER2_BASE + 0xE000 + 0x80)
#define U8500_GPIO8_BASE (U8500_PER5_BASE + 0x1E000)
/* Per7 */
#define U8500_CLKRST7_BASE (U8500_PER7_BASE + 0xf000)
/* Per6 */
#define U8500_MTU0_BASE_V1 (U8500_PER6_BASE + 0x6000)
#define U8500_MTU1_BASE_V1 (U8500_PER6_BASE + 0x7000)
#define U8500_CLKRST6_BASE (U8500_PER6_BASE + 0xf000)
/* Per5 */
#define U8500_CLKRST5_BASE (U8500_PER5_BASE + 0x1f000)
/* Per4 */
#define U8500_PRCMU_BASE (U8500_PER4_BASE + 0x07000)
#define U8500_PRCMU_TCDM_BASE (U8500_PER4_BASE + 0x68000)
/* Per3 */
#define U8500_UART2_BASE (U8500_PER3_BASE + 0x7000)
#define U8500_CLKRST3_BASE (U8500_PER3_BASE + 0xf000)
/* Per2 */
#define U8500_CLKRST2_BASE (U8500_PER2_BASE + 0xf000)
/* Per1 */
#define U8500_UART0_BASE (U8500_PER1_BASE + 0x0000)
#define U8500_UART1_BASE (U8500_PER1_BASE + 0x1000)
#define U8500_CLKRST1_BASE (U8500_PER1_BASE + 0xf000)
/* Last page of Boot ROM */
#define U8500_BOOTROM_BASE 0x90000000
#define U8500_ASIC_ID_LOC_ED_V1 (U8500_BOOTROM_BASE + 0x1FFF4)
#define U8500_ASIC_ID_LOC_V2 (U8500_BOOTROM_BASE + 0x1DBF4)
/* AB8500 specifics */
/* address bank */
#define AB8500_REGU_CTRL2 0x0004
#define AB8500_MISC 0x0010
/* registers */
#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A
#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421
#define AB8500_REV_REG 0x1080
#define AB8500_GPIO_SEL2_REG 0x1001
#define AB8500_GPIO_DIR2_REG 0x1011
#define AB8500_GPIO_DIR4_REG 0x1013
#define AB8500_GPIO_SEL4_REG 0x1003
#define AB8500_GPIO_OUT2_REG 0x1021
#define AB8500_GPIO_OUT4_REG 0x1023
#define LDO_VAUX3_ENABLE_MASK 0x3
#define LDO_VAUX3_ENABLE_VAL 0x1
#define LDO_VAUX3_SEL_MASK 0xf
#define LDO_VAUX3_SEL_2V9 0xd
#define LDO_VAUX3_V2_SEL_MASK 0x7
#define LDO_VAUX3_V2_SEL_2V91 0x7
#endif /* __ASM_ARCH_HARDWARE_H */