upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
181 lines
4.8 KiB
181 lines
4.8 KiB
/*
|
|
* Copyright (C) 2006 Atmel Corporation
|
|
*
|
|
* Configuration settings for the AVR32 Network Gateway
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <asm/arch/memory-map.h>
|
|
|
|
#define CONFIG_AVR32 1
|
|
#define CONFIG_AT32AP 1
|
|
#define CONFIG_AT32AP7000 1
|
|
#define CONFIG_ATNGW100 1
|
|
|
|
#define CFG_HZ 1000
|
|
|
|
/*
|
|
* Set up the PLL to run at 140 MHz, the CPU to run at the PLL
|
|
* frequency, the HSB and PBB busses to run at 1/2 the PLL frequency
|
|
* and the PBA bus to run at 1/4 the PLL frequency.
|
|
*/
|
|
#define CONFIG_PLL 1
|
|
#define CFG_POWER_MANAGER 1
|
|
#define CFG_OSC0_HZ 20000000
|
|
#define CFG_PLL0_DIV 1
|
|
#define CFG_PLL0_MUL 7
|
|
#define CFG_PLL0_SUPPRESS_CYCLES 16
|
|
#define CFG_CLKDIV_CPU 0
|
|
#define CFG_CLKDIV_HSB 1
|
|
#define CFG_CLKDIV_PBA 2
|
|
#define CFG_CLKDIV_PBB 1
|
|
|
|
/*
|
|
* The PLLOPT register controls the PLL like this:
|
|
* icp = PLLOPT<2>
|
|
* ivco = PLLOPT<1:0>
|
|
*
|
|
* We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz).
|
|
*/
|
|
#define CFG_PLL0_OPT 0x04
|
|
|
|
#define CONFIG_USART1 1
|
|
|
|
/* User serviceable stuff */
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
#define CONFIG_CMDLINE_TAG 1
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CONFIG_STACKSIZE (2048)
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_BOOTARGS \
|
|
"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2"
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"fsload; bootm"
|
|
|
|
/*
|
|
* Only interrupt autoboot if <space> is pressed. Otherwise, garbage
|
|
* data on the serial line may interrupt the boot sequence.
|
|
*/
|
|
#define CONFIG_BOOTDELAY 1
|
|
#define CONFIG_AUTOBOOT 1
|
|
#define CONFIG_AUTOBOOT_KEYED 1
|
|
#define CONFIG_AUTOBOOT_PROMPT \
|
|
"Press SPACE to abort autoboot in %d seconds\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "d"
|
|
#define CONFIG_AUTOBOOT_STOP_STR " "
|
|
|
|
/*
|
|
* After booting the board for the first time, new ethernet addresses
|
|
* should be generated and assigned to the environment variables
|
|
* "ethaddr" and "eth1addr". This is normally done during production.
|
|
*/
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE 1
|
|
#define CONFIG_NET_MULTI 1
|
|
|
|
/*
|
|
* BOOTP/DHCP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EXT2
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_CMD_SPI
|
|
|
|
#undef CONFIG_CMD_AUTOSCRIPT
|
|
#undef CONFIG_CMD_FPGA
|
|
#undef CONFIG_CMD_SETGETDCR
|
|
#undef CONFIG_CMD_XIMG
|
|
|
|
#define CONFIG_ATMEL_USART 1
|
|
#define CONFIG_MACB 1
|
|
#define CONFIG_PIO2 1
|
|
#define CFG_NR_PIOS 5
|
|
#define CFG_HSDRAMC 1
|
|
#define CONFIG_MMC 1
|
|
#define CONFIG_ATMEL_MCI 1
|
|
#define CONFIG_ATMEL_SPI 1
|
|
|
|
#define CONFIG_SPI_FLASH 1
|
|
#define CONFIG_SPI_FLASH_ATMEL 1
|
|
|
|
#define CFG_DCACHE_LINESZ 32
|
|
#define CFG_ICACHE_LINESZ 32
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
|
|
#define CFG_FLASH_CFI 1
|
|
#define CONFIG_FLASH_CFI_DRIVER 1
|
|
|
|
#define CFG_FLASH_BASE 0x00000000
|
|
#define CFG_FLASH_SIZE 0x800000
|
|
#define CFG_MAX_FLASH_BANKS 1
|
|
#define CFG_MAX_FLASH_SECT 135
|
|
|
|
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
|
|
|
#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE
|
|
#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE
|
|
#define CFG_SDRAM_BASE EBI_SDRAM_BASE
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_SIZE 65536
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_FLASH_SIZE - CFG_ENV_SIZE)
|
|
|
|
#define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE)
|
|
|
|
#define CFG_MALLOC_LEN (256*1024)
|
|
#define CFG_DMA_ALLOC_LEN (16384)
|
|
|
|
/* Allow 4MB for the kernel run-time image */
|
|
#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000)
|
|
#define CFG_BOOTPARAMS_LEN (16 * 1024)
|
|
|
|
/* Other configuration settings that shouldn't have to change all that often */
|
|
#define CFG_PROMPT "U-Boot> "
|
|
#define CFG_CBSIZE 256
|
|
#define CFG_MAXARGS 16
|
|
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
|
|
#define CFG_LONGHELP 1
|
|
|
|
#define CFG_MEMTEST_START EBI_SDRAM_BASE
|
|
#define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000)
|
|
|
|
#define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
|
|
|
|
#endif /* __CONFIG_H */
|
|
|