upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
245 lines
7.5 KiB
245 lines
7.5 KiB
/*
|
|
* (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl
|
|
*
|
|
* Configuation settings for the TI OMAP VoiceBlue board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <configs/omap1510.h>
|
|
|
|
#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
|
|
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
#define CONFIG_OMAP1510 1 /* which is in a 5910 */
|
|
|
|
/* Input clock of PLL */
|
|
#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz input clock */
|
|
#define CONFIG_XTAL_FREQ 12000000
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
#define CONFIG_MISC_INIT_R /* There is nothing to really init */
|
|
#define BOARD_LATE_INIT /* but we flash the LEDs here */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
|
|
|
/*
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
|
|
#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024)
|
|
|
|
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
|
|
#define CFG_LOAD_ADDR PHYS_SDRAM_1 + 0x400000 /* default load address */
|
|
|
|
/*
|
|
* FLASH organization
|
|
*/
|
|
#define CFG_FLASH_CFI /* Flash is CFI conformant */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
|
|
#define CFG_MAX_FLASH_BANKS 1
|
|
#define CFG_FLASH_BASE PHYS_FLASH_1
|
|
|
|
/* FIXME: Does not work on AMD flash */
|
|
/* #define CFG_FLASH_USE_BUFFER_WRITE 1 */ /* use buffered writes (20x faster) */
|
|
#define CFG_MAX_FLASH_SECT 512 /* max # of sectors on one chip */
|
|
|
|
#define CFG_MONITOR_BASE PHYS_FLASH_1
|
|
#define CFG_MONITOR_LEN (256 * 1024)
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH
|
|
#define CFG_ENV_ADDR (PHYS_FLASH_1 + CFG_MONITOR_LEN)
|
|
#define CFG_ENV_SIZE (8 * 1024)
|
|
#define CFG_ENV_SECT_SIZE (64 * 1024)
|
|
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
|
|
#define CFG_ENV_SIZE_REDUND CFG_ENV_SIZE
|
|
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
/*
|
|
* Size of malloc() pool and stack
|
|
*/
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CFG_MALLOC_LEN (4 * 1024 * 1024)
|
|
#define CONFIG_STACKSIZE (1 * 1024 * 1024)
|
|
#define PHYS_SDRAM_1_RESERVED (CFG_MONITOR_LEN + CFG_MALLOC_LEN + CONFIG_STACKSIZE)
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_SMC91111
|
|
#define CONFIG_SMC91111_BASE 0x08000300
|
|
|
|
#define CONFIG_HARD_I2C
|
|
#define CFG_I2C_SPEED 100000
|
|
#define CFG_I2C_SLAVE 1
|
|
#define CONFIG_DRIVER_OMAP1510_I2C
|
|
|
|
#define CONFIG_RTC_DS1307
|
|
#define CFG_I2C_RTC_ADDR 0x68
|
|
|
|
/*
|
|
* NS16550 Configuration
|
|
*/
|
|
#define CFG_NS16550
|
|
#define CFG_NS16550_SERIAL
|
|
#define CFG_NS16550_REG_SIZE (-4)
|
|
#define CFG_NS16550_CLK (CONFIG_XTAL_FREQ) /* can be 12M/32Khz or 48Mhz */
|
|
#define CFG_NS16550_COM1 OMAP1510_UART1_BASE /* uart1 */
|
|
|
|
#define CONFIG_CONS_INDEX 1
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_BDI
|
|
#define CONFIG_CMD_BOOTD
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_ENV
|
|
#define CONFIG_CMD_FLASH
|
|
#define CONFIG_CMD_IMI
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_MEMORY
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_RUN
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
|
|
|
|
#define CONFIG_LOOPW
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
|
|
#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
|
|
#define CFG_AUTOLOAD "n" /* No autoload */
|
|
#define CONFIG_BOOTCOMMAND "run nboot"
|
|
#define CONFIG_PREBOOT "run setup"
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"silent=1\0" \
|
|
"ospart=0\0" \
|
|
"bootfile=/boot/uImage\0" \
|
|
"setpart=" \
|
|
"if test -n $swapos; then " \
|
|
"setenv swapos; saveenv; " \
|
|
"if test $ospart -eq 0; then setenv ospart 1; else setenv ospart 0; fi; "\
|
|
"fi\0" \
|
|
"setup=setenv bootargs console=ttyS0,$baudrate " \
|
|
"mtdparts=$mtdparts\0" \
|
|
"nfsargs=setenv bootargs $bootargs " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \
|
|
"nfsroot=$rootpath root=/dev/nfs\0" \
|
|
"flashargs=run setpart; setenv bootargs $bootargs " \
|
|
"root=mtd:data$ospart ro " \
|
|
"rootfstype=jffs2\0" \
|
|
"initrdargs=setenv bootargs $bootargs " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"fboot=run flashargs; chpart data$ospart; fsload; bootm\0" \
|
|
"mboot=bootp; run initrdargs; tftp; bootm\0" \
|
|
"nboot=bootp; run nfsargs; tftp; bootm\0"
|
|
|
|
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
|
|
|
|
#if 1 /* feel free to disable for development */
|
|
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
|
|
#define CONFIG_AUTOBOOT_PROMPT "\nVoiceBlue Enterprise - booting...\n"
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */
|
|
#endif
|
|
|
|
/*
|
|
* JFFS2 partitions (mtdparts command line support)
|
|
*/
|
|
#define CONFIG_JFFS2_CMDLINE
|
|
#define MTDIDS_DEFAULT "nor0=omapflash.0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=omapflash.0:256k(u-boot),64k(env),64k(r_env),16192k(data0),-(data1)"
|
|
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#define CONFIG_AUTO_COMPLETE
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "# " /* Monitor Command Prompt */
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START PHYS_SDRAM_1
|
|
#define CFG_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - PHYS_SDRAM_1_RESERVED
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
/* The 1510 has 3 timers, they can be driven by the RefClk (12Mhz) or by DPLL1.
|
|
* This time is further subdivided by a local divisor.
|
|
*/
|
|
#define CFG_TIMERBASE OMAP1510_TIMER1_BASE
|
|
#define CFG_PVT 7 /* 2^(pvt+1), divide by 256 */
|
|
#define CFG_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CFG_PVT))
|
|
|
|
#define OMAP5910_DPLL_DIV 1
|
|
#define OMAP5910_DPLL_MUL ((CONFIG_SYS_CLK_FREQ * \
|
|
(1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ)
|
|
|
|
#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */
|
|
#define OMAP5910_LCD_DIV 2 /* CKL/4 */
|
|
#define OMAP5910_ARM_DIV 0 /* CKL/1 */
|
|
#define OMAP5910_DSP_DIV 0 /* CKL/1 */
|
|
#define OMAP5910_TC_DIV 1 /* CKL/2 */
|
|
#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */
|
|
#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */
|
|
|
|
#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b Clock Enable */
|
|
#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \
|
|
(OMAP5910_LCD_DIV << 2) | \
|
|
(OMAP5910_ARM_DIV << 4) | \
|
|
(OMAP5910_DSP_DIV << 6) | \
|
|
(OMAP5910_TC_DIV << 8) | \
|
|
(OMAP5910_DSP_MMU_DIV << 10) | \
|
|
(OMAP5910_ARM_TIM_SEL << 12))
|
|
|
|
#define VOICEBLUE_LED_REG 0x04030000
|
|
|
|
#endif /* __CONFIG_H */
|
|
|