upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/xilinx-ppc440.h

106 lines
3.8 KiB

/*
* (C) Copyright 2008
* Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
* This work has been supported by: QTechnology http://qtec.com/
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __CONFIG_GEN_H
#define __CONFIG_GEN_H
/*
#define DEBUG
#define ET_DEBUG
*/
/*CPU*/
#define CONFIG_XILINX_440 1
#define CONFIG_440 1
#define CONFIG_4xx 1
/*Mem Map*/
#define CFG_SDRAM_BASE 0x0
#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_MONITOR_LEN (192 * 1024)
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128 * 1024)
/*Uart*/
#define CONFIG_XILINX_UARTLITE
#define CONFIG_BAUDRATE XPAR_UARTLITE_0_BAUDRATE
#define CFG_BAUDRATE_TABLE { XPAR_UARTLITE_0_BAUDRATE }
#define CONFIG_SERIAL_BASE XPAR_UARTLITE_0_BASEADDR
/*Cmd*/
#include <config_cmd_default.h>
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_ELF
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_REGINFO
#define CONFIG_CMD_JFFS2
#define CONFIG_JFFS2_CMDLINE
#undef CONFIG_CMD_SPI
#undef CONFIG_CMD_I2C
#undef CONFIG_CMD_DTT
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_PING
#undef CONFIG_CMD_DHCP
#undef CONFIG_CMD_EEPROM
#undef CONFIG_CMD_IMLS
/*Misc*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CFG_LONGHELP /* undef to save memory */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
#define CFG_MAXARGS 16 /* max number of command args */
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
#define CFG_MEMTEST_START 0x00400000 /* memtest works on */
#define CFG_MEMTEST_END 0x00C00000 /* 4 ... 12 MB in DRAM */
#define CFG_LOAD_ADDR 0x00400000 /* default load address */
#define CFG_EXTBDINFO 1 /* Extended board_into (bd_t) */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING /* add command line history */
#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
#define CONFIG_LOOPW /* enable loopw command */
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
#define CONFIG_VERSION_VARIABLE /* include version env variable */
#define CFG_CONSOLE_INFO_QUIET /* don't print console @ startup */
#define CFG_HUSH_PARSER /* Use the HUSH parser */
#define CFG_PROMPT_HUSH_PS2 "> "
#define CONFIG_LOADS_ECHO /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */
#define CFG_BOOTMAPSZ (8 << 20)/* Initial Memory map for Linux */
/*Stack*/
#define CFG_INIT_RAM_ADDR 0x800000 /* Initial RAM address */
#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */
#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
/*Speed*/
#define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ
/*Flash*/
#define CFG_FLASH_BASE XPAR_FLASH_MEM0_BASEADDR
#define CFG_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CFG_FLASH_EMPTY_INFO 1
#define CFG_MAX_FLASH_BANKS 1
#define CFG_FLASH_PROTECTION
#endif /* __CONFIG_H */