upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/o2d300.h

81 lines
2.5 KiB

/*
* (C) Copyright 2012
* DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* Valid values for CONFIG_SYS_TEXT_BASE are:
* 0xFC000000 boot low boot high (standard configuration)
* 0x00100000 boot from RAM (for testing only)
*/
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
#endif
/* Board specific flash config */
#define CONFIG_SYS_FLASH_BASE 0xfc000000
#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_SECT 512
/*
* Include common defines for all ifm boards
*/
#include "o2dnt-common.h"
/*
* GPIO configuration:
* CS1 SDRAM activate + no CAN + no PCI
*/
#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004
/* Other board specific configs */
#define CONFIG_SYS_BOOTCS_CFG 0x00057d01
#define CONFIG_SYS_RESET_ADDRESS 0xfc000000
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */
/* Use redundant environment */
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#define CONFIG_BOARD_NAME "o2d300"
#define CONFIG_BOARD_BOOTCMD "run dhcp_boot"
#define CONFIG_BOARD_MEM_LIMIT xstr(126)
#define BOARD_POST_CRC32_END xstr(0x02000000)
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_SETTINGS \
CONFIG_IFM_DEFAULT_ENV_OLD \
CONFIG_IFM_DEFAULT_ENV_NEW \
"autoload=no\0" \
"dhcp_boot=run dhcpcmd;run flash_mtd\0" \
"flash_mtd=run mtd_args addip addmem;" \
"bootm ${kernel_addr}\0" \
"mtd_args=setenv bootargs root=/dev/mtdblock4 " \
"rw rootfstype=cramfs\0" \
"linbot=fc080000\0" \
"lintop=fc17ffff\0" \
"rambot=fc180000\0" \
"ramtop=fc57ffff\0" \
"jffbot=fc580000\0" \
"jfftop=fd39ffff\0" \
"ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
"ubotop=fc03ffff\0" \
"halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \
"halbot=fd3a0000\0" \
"haltop=fdf9ffff\0" \
"progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \
"cp.b ${fileaddr} ${halbot} ${filesize}\0" \
"kernel_addr=0xfc060000\0" \
"ramdisk_addr=0xfc160000\0" \
"master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \
"mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \
"netretry=once\0" \
"protcmd=protect on ${linbot} ${lintop};" \
"protect on ${rambot} ${ramtop}\0" \
"o2derror=def_env\0" \
"sensorType=O2D300AA\0"