upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/include/configs/s5pc210_universal.h

284 lines
8.3 KiB

/*
* Copyright (C) 2010 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
*
* Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_SAMSUNG 1 /* in a SAMSUNG core */
#define CONFIG_S5P 1 /* which is in a S5P Family */
#define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */
#define CONFIG_UNIVERSAL 1 /* working with Universal */
#define CONFIG_TIZEN 1 /* TIZEN lib */
#include <asm/arch/cpu.h> /* get chip and board defs */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
/* Keep L2 Cache Disabled */
#define CONFIG_SYS_L2CACHE_OFF 1
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_TEXT_BASE 0x44800000
/* input clock of PLL: Universal has 24MHz input clock at EXYNOS4210 */
#define CONFIG_SYS_CLK_FREQ_C210 24000000
#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_CLK_FREQ_C210
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_CMDLINE_TAG
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* select serial console configuration */
#define CONFIG_SERIAL2 1 /* use SERIAL 2 */
#define CONFIG_BAUDRATE 115200
/* MMC */
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_SDHCI
#define CONFIG_S5P_SDHCI
/* PWM */
#define CONFIG_PWM 1
/* It should define before config_cmd_default.h */
#define CONFIG_SYS_NO_FLASH 1
/* Command definition */
#include <config_cmd_default.h>
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_MISC
#undef CONFIG_CMD_NET
#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_XIMG
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_ONENAND
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_BOOTDELAY 1
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
#define MTDIDS_DEFAULT "onenand0=samsung-onenand"
#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\
"128k(s-boot)"\
",896k(bootloader)"\
",256k(params)"\
",2816k(config)"\
",8m(csa)"\
",7m(kernel)"\
",1m(log)"\
",12m(modem)"\
",60m(qboot)"\
",-(UBI)\0"
#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT
#define MBRPARTS_DEFAULT "20M(permanent)"\
",20M(boot)"\
",1G(system)"\
",100M(swap)"\
",-(UMS)\0"
#define CONFIG_BOOTARGS "Please use defined boot"
#define CONFIG_BOOTCOMMAND "run mmcboot"
#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"
#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
#define CONFIG_BOOTBLOCK "10"
#define CONFIG_UBIBLOCK "9"
#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
"${mtdparts}"
#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_EXTRA_ENV_SETTINGS \
"updateb=" \
"onenand erase 0x0 0x100000;" \
"onenand write 0x42008000 0x0 0x100000\0" \
"updatek=" \
"onenand erase 0xc00000 0x500000;" \
"onenand write 0x41008000 0xc00000 0x500000\0" \
"bootk=" \
"run loaduimage; bootm 0x40007FC0\0" \
"updatemmc=" \
"mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
"mmc boot 0 1 1 0\0" \
"updatebackup=" \
"mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
"mmc boot 0 1 1 0\0" \
"updatebootb=" \
"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
"lpj=lpj=3981312\0" \
"ubifsboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
"tftpboot=" \
"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
CONFIG_ENV_COMMON_BOOT \
"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
"nfsboot=" \
"set bootargs root=/dev/nfs rw " \
"nfsroot=${nfsroot},nolock,tcp " \
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
"; run bootk\0" \
"ramfsboot=" \
"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
"${console} ${meminfo} " \
"initrd=0x43000000,8M ramdisk=8192\0" \
"mmcboot=" \
"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
"run loaduimage; bootm 0x40007FC0\0" \
"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
"boottrace=setenv opts initcall_debug; run bootcmd\0" \
"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
"verify=n\0" \
"rootfstype=ext4\0" \
"console=" CONFIG_DEFAULT_CONSOLE \
"mtdparts=" MTDPARTS_DEFAULT \
"mbrparts=" MBRPARTS_DEFAULT \
"meminfo=crashkernel=32M@0x50000000\0" \
"nfsroot=/nfsroot/arm\0" \
"bootblock=" CONFIG_BOOTBLOCK "\0" \
"ubiblock=" CONFIG_UBIBLOCK" \0" \
"ubi=enabled\0" \
"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
"mmcdev=0\0" \
"mmcbootpart=2\0" \
"mmcrootpart=3\0" \
"opts=always_resume=1"
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP /* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
#define CONFIG_SYS_PROMPT "Universal # "
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
/* Universal has 2 banks of DRAM */
#define CONFIG_NR_DRAM_BANKS 2
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */
#define PHYS_SDRAM_1_SIZE (256 << 20) /* 256 MB in CS 0 */
#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */
#define PHYS_SDRAM_2_SIZE (256 << 20) /* 256 MB in CS 0 */
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
#define CONFIG_USE_ONENAND_BOARD_INIT
#define CONFIG_SAMSUNG_ONENAND
#define CONFIG_SYS_ONENAND_BASE 0x0C000000
#define CONFIG_ENV_IS_IN_MMC 1
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_ENV_SIZE 4096
#define CONFIG_ENV_OFFSET ((32 - 4) << 10)/* 32KiB - 4KiB */
#define CONFIG_DOS_PARTITION 1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_CACHELINE_SIZE 32
#include <asm/arch/gpio.h>
/*
* I2C Settings
*/
#define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_part1_get_nr(b, 7)
#define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_part1_get_nr(b, 6)
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
#define CONFIG_SYS_I2C_SOFT_SPEED 50000
#define CONFIG_SYS_I2C_SOFT_SLAVE 0
#define CONFIG_SOFT_I2C_READ_REPEATED_START
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_SYS_MAX_I2C_BUS 7
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_MAX8998
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_S3C_UDC_OTG
#define CONFIG_USB_GADGET_DUALSPEED
/*
* SPI Settings
*/
#define CONFIG_SOFT_SPI
#define CONFIG_SOFT_SPI_MODE SPI_MODE_3
#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_part2_get_nr(y3, 1)
#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_part2_get_nr(y3, 3)
#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_part2_get_nr(y3, 0)
#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_part2_get_nr(y4, 3)
#define SPI_DELAY udelay(1)
#undef SPI_INIT
#define SPI_SCL(bit) universal_spi_scl(bit)
#define SPI_SDA(bit) universal_spi_sda(bit)
#define SPI_READ universal_spi_read()
#ifndef __ASSEMBLY__
void universal_spi_scl(int bit);
void universal_spi_sda(int bit);
int universal_spi_read(void);
#endif
/*
* LCD Settings
*/
#define CONFIG_EXYNOS_FB
#define CONFIG_LCD
#define CONFIG_CMD_BMP
#define CONFIG_BMP_32BPP
#define CONFIG_LD9040
#define CONFIG_EXYNOS_MIPI_DSIM
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((520 * 120 * 4) + (1 << 12))
#endif /* __CONFIG_H */