upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
385 lines
11 KiB
385 lines
11 KiB
/*------------------------------------------------------------------------------+
|
|
*
|
|
* This souce code has been made available to you by EuroDesign
|
|
* (www.eurodsn.de). It's based on the original IBM source code, so
|
|
* this follows:
|
|
*
|
|
* This source code is dual-licensed. You may use it under the terms of the
|
|
* GNU General Public License version 2, or under the license below.
|
|
*
|
|
* This source code has been made available to you by IBM on an AS-IS
|
|
* basis. Anyone receiving this source is licensed under IBM
|
|
* copyrights to use it in any way he or she deems fit, including
|
|
* copying it, modifying it, compiling it, and redistributing it either
|
|
* with or without modifications. No license under IBM patents or
|
|
* patent applications is to be implied by the copyright license.
|
|
*
|
|
* Any user of this software should understand that IBM cannot provide
|
|
* technical support for this software and will not be responsible for
|
|
* any consequences resulting from the use of this software.
|
|
*
|
|
* Any person who transfers this source code or any derivative work
|
|
* must include the IBM copyright notice, this paragraph, and the
|
|
* preceding two paragraphs in the transferred software.
|
|
*
|
|
* COPYRIGHT I B M CORPORATION 1995
|
|
* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
|
|
*------------------------------------------------------------------------------- */
|
|
|
|
#include <config.h>
|
|
#include <asm/ppc4xx.h>
|
|
|
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
/**
|
|
* ext_bus_cntlr_init - Initializes the External Bus Controller for the external peripherals
|
|
*
|
|
* IMPORTANT: For pass1 this code must run from cache since you can not
|
|
* reliably change a peripheral banks timing register (pbxap) while running
|
|
* code from that bank. For ex., since we are running from ROM on bank 0, we
|
|
* can NOT execute the code that modifies bank 0 timings from ROM, so
|
|
* we run it from cache.
|
|
*
|
|
* Bank 0 - Boot-Flash
|
|
* Bank 1 - NAND-Flash
|
|
* Bank 2 - ISA bus
|
|
* Bank 3 - Second Flash
|
|
* Bank 4 - USB controller
|
|
*/
|
|
.globl ext_bus_cntlr_init
|
|
ext_bus_cntlr_init:
|
|
/*
|
|
* We need the current boot up configuration to set correct
|
|
* timings into internal flash and external flash
|
|
*/
|
|
mfdcr r24,CPC0_PSR /* xxxx xxxx xxxx xxx? ?xxx xxxx xxxx xxxx
|
|
0 0 -> 8 bit external ROM
|
|
0 1 -> 16 bit internal ROM */
|
|
addi r4,0,2
|
|
srw r24,r24,r4 /* shift right r24 two positions */
|
|
andi. r24,r24,0x06000
|
|
/*
|
|
* All calculations are based on 33MHz EBC clock.
|
|
*
|
|
* First, create a "very slow" timing (~250ns) with burst mode enabled
|
|
* This is need for the external flash access
|
|
*/
|
|
lis r25,0x0800
|
|
ori r25,r25,0x0280 /* 0000 1000 0xxx 0000 0000 0010 100x xxxx = 0x03800280
|
|
/*
|
|
* Second, create a fast timing:
|
|
* 90ns first cycle - 3 clock access
|
|
* and 90ns burst cycle, plus 1 clock after the last access
|
|
* This is used for the internal access
|
|
*/
|
|
lis r26,0x8900
|
|
ori r26,r26,0x0280 /* 1000 1001 0xxx 0000 0000 0010 100x xxxx
|
|
/*
|
|
* We can't change settings on CS# if we currently use them.
|
|
* -> load a few instructions into cache and run this code from cache
|
|
*/
|
|
mflr r4 /* save link register */
|
|
bl ..getAddr
|
|
..getAddr:
|
|
mflr r3 /* get address of ..getAddr */
|
|
mtlr r4 /* restore link register */
|
|
addi r4,0,14 /* set ctr to 10; used to prefetch */
|
|
mtctr r4 /* 10 cache lines to fit this function
|
|
in cache (gives us 8x10=80 instructions) */
|
|
..ebcloop:
|
|
icbt r0,r3 /* prefetch cache line for addr in r3 */
|
|
addi r3,r3,32 /* move to next cache line */
|
|
bdnz ..ebcloop /* continue for 10 cache lines */
|
|
/*
|
|
* Delay to ensure all accesses to ROM are complete before changing
|
|
* bank 0 timings. 200usec should be enough.
|
|
* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles
|
|
*/
|
|
lis r3,0x0
|
|
ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
|
|
mtctr r3
|
|
..spinlp:
|
|
bdnz ..spinlp /* spin loop */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Bank 0 (BOOT-ROM) initialization
|
|
* 0xFFEF00000....0xFFFFFFF
|
|
* We only have to change the timing. Mapping is ok by boot-strapping
|
|
*----------------------------------------------------------------------- */
|
|
|
|
li r4,PB1AP /* PB0AP=Peripheral Bank 0 Access Parameters */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
mr r4,r26 /* assume internal fast flash is boot flash */
|
|
cmpwi r24,0x2000 /* assumption true? ... */
|
|
beq 1f /* ...yes! */
|
|
mr r4,r25 /* ...no, use the slow variant */
|
|
mr r25,r26 /* use this for the other flash */
|
|
1:
|
|
mtdcr EBC0_CFGDATA,r4 /* change timing now */
|
|
|
|
li r4,PB0CR /* PB0CR=Peripheral Bank 0 Control Register */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
mfdcr r4,EBC0_CFGDATA
|
|
lis r3,0x0001
|
|
ori r3,r3,0x8000 /* allow reads and writes */
|
|
or r4,r4,r3
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Bank 3 (Second-Flash) initialization
|
|
* 0xF0000000...0xF01FFFFF -> 2MB
|
|
*----------------------------------------------------------------------- */
|
|
|
|
li r4,PB3AP /* Peripheral Bank 1 Access Parameter */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
mtdcr EBC0_CFGDATA,r2 /* change timing */
|
|
|
|
li r4,PB3CR /* Peripheral Bank 1 Configuration Registers */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
lis r4,0xF003
|
|
ori r4,r4,0x8000
|
|
/*
|
|
* Consider boot configuration
|
|
*/
|
|
xori r24,r24,0x2000 /* invert current bus width */
|
|
or r4,r4,r24
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Bank 1 (NAND-Flash) initialization
|
|
* 0x77D00000...0x77DFFFFF -> 1MB
|
|
* - the write/read pulse to the NAND can be as short as 25ns, bus the cycle time is always 50ns
|
|
* - the setup time is 0ns
|
|
* - the hold time is 15ns
|
|
* ->
|
|
* - TWT = 0
|
|
* - CSN = 0
|
|
* - OEN = 0
|
|
* - WBN = 0
|
|
* - WBF = 0
|
|
* - TH = 1
|
|
* ----> 2 clocks per cycle = 60ns cycle (30ns active, 30ns hold)
|
|
*----------------------------------------------------------------------- */
|
|
|
|
li r4,PB1AP /* Peripheral Bank 1 Access Parameter */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
lis r4,0x0000
|
|
ori r4,r4,0x0200
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
li r4,PB1CR /* Peripheral Bank 1 Configuration Registers */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
lis r4,0x77D1
|
|
ori r4,r4,0x8000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
|
|
/* USB init (without acceleration) */
|
|
#ifndef CONFIG_ISP1161_PRESENT
|
|
li r4,PB4AP /* PB4AP=Peripheral Bank 4 Access Parameters */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
lis r4,0x0180
|
|
ori r4,r4,0x5940
|
|
mtdcr EBC0_CFGDATA,r4
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Bank 2 (ISA Access) initialization (plus memory bank 6 and 7)
|
|
* 0x78000000...0x7BFFFFFF -> 64 MB
|
|
* Wir arbeiten bei 33 MHz -> 30ns
|
|
*-----------------------------------------------------------------------
|
|
|
|
A7 (ppc notation) or A24 (standard notation) decides about
|
|
the type of access:
|
|
A7/A24=0 -> memory cycle
|
|
A7/ /A24=1 -> I/O cycle
|
|
*/
|
|
li r4,PB2AP /* PB2AP=Peripheral Bank 2 Access Parameters */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
/*
|
|
We emulate an ISA access
|
|
|
|
1. Address active
|
|
2. wait 0 EBC clocks -> CSN=0
|
|
3. set CS#
|
|
4. wait 0 EBC clock -> OEN/WBN=0
|
|
5. set OE#/WE#
|
|
6. wait 4 clocks (ca. 90ns) and for Ready signal
|
|
7. hold for 4 clocks -> TH=4
|
|
*/
|
|
|
|
#if 1
|
|
/* faster access to isa-bus */
|
|
lis r4,0x0180
|
|
ori r4,r4,0x5940
|
|
#else
|
|
lis r4,0x0100
|
|
ori r4,r4,0x0340
|
|
#endif
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
#ifdef IDE_USES_ISA_EMULATION
|
|
li r25,PB5AP /* PB5AP=Peripheral Bank 5 Access Parameters */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
mtdcr EBC0_CFGDATA,r4
|
|
#endif
|
|
|
|
li r25,PB6AP /* PB6AP=Peripheral Bank 6 Access Parameters */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
mtdcr EBC0_CFGDATA,r4
|
|
li r25,PB7AP /* PB7AP=Peripheral Bank 7 Access Parameters */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
li r25,PB2CR /* PB2CR=Peripheral Bank 2 Configuration Register */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
|
|
lis r4,0x780B
|
|
ori r4,r4,0xA000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
/*
|
|
* the other areas are only 1MiB in size
|
|
*/
|
|
lis r4,0x7401
|
|
ori r4,r4,0xA000
|
|
|
|
li r25,PB6CR /* PB6CR=Peripheral Bank 6 Configuration Register */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
lis r4,0x7401
|
|
ori r4,r4,0xA000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
li r25,PB7CR /* PB7CR=Peripheral Bank 7 Configuration Register */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
lis r4,0x7411
|
|
ori r4,r4,0xA000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
#ifndef CONFIG_ISP1161_PRESENT
|
|
li r25,PB4CR /* PB4CR=Peripheral Bank 4 Configuration Register */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
lis r4,0x7421
|
|
ori r4,r4,0xA000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
#endif
|
|
#ifdef IDE_USES_ISA_EMULATION
|
|
li r25,PB5CR /* PB5CR=Peripheral Bank 5 Configuration Register */
|
|
mtdcr EBC0_CFGADDR,r25
|
|
lis r4,0x0000
|
|
ori r4,r4,0x0000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory bank 4: USB controller Philips ISP6111
|
|
* 0x77C00000 ... 0x77CFFFFF
|
|
*
|
|
* The chip is connected to:
|
|
* - CPU CS#4
|
|
* - CPU IRQ#2
|
|
* - CPU DMA 3
|
|
*
|
|
* Timing:
|
|
* - command to first data: 300ns. Software must ensure this timing!
|
|
* - Write pulse: 26ns
|
|
* - Read pulse: 33ns
|
|
* - read cycle time: 150ns
|
|
* - write cycle time: 140ns
|
|
*
|
|
* Note: All calculations are based on 33MHz EBC clock. One '#' or '_' is 30ns
|
|
*
|
|
* |- 300ns --|
|
|
* |---- 420ns ---|---- 420ns ---| cycle
|
|
* CS ############:###____#######:###____#######
|
|
* OE ############:####___#######:####___#######
|
|
* WE ############:####__########:####__########
|
|
*
|
|
* ----> 2 clocks RD/WR pulses: 60ns
|
|
* ----> CSN: 3 clock, 90ns
|
|
* ----> OEN: 1 clocks (read cycle)
|
|
* ----> WBN: 1 clocks (write cycle)
|
|
* ----> WBE: 2 clocks
|
|
* ----> TH: 7 clock, 210ns
|
|
* ----> TWT: 7 clocks
|
|
*----------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_ISP1161_PRESENT
|
|
|
|
li r4,PB4AP /* PB4AP=Peripheral Bank 4 Access Parameters */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
lis r4,0x030D
|
|
ori r4,r4,0x5E80
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
li r4,PB4CR /* PB2CR=Peripheral Bank 4 Configuration Register */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
lis r4,0x77C1
|
|
ori r4,r4,0xA000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
#endif
|
|
|
|
#ifndef IDE_USES_ISA_EMULATION
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory Bank 5 used for IDE access
|
|
*
|
|
* Timings for IDE Interface
|
|
*
|
|
* SETUP / LENGTH / HOLD - cycles valid for 33.3 MHz clk -> 30ns cycle time
|
|
* 70 165 30 PIO-Mode 0, [ns]
|
|
* 3 6 1 [Cycles] ----> AP=0x040C0200
|
|
* 50 125 20 PIO-Mode 1, [ns]
|
|
* 2 5 1 [Cycles] ----> AP=0x03080200
|
|
* 30 100 15 PIO-Mode 2, [ns]
|
|
* 1 4 1 [Cycles] ----> AP=0x02040200
|
|
* 30 80 10 PIO-Mode 3, [ns]
|
|
* 1 3 1 [Cycles] ----> AP=0x01840200
|
|
* 25 70 10 PIO-Mode 4, [ns]
|
|
* 1 3 1 [Cycles] ----> AP=0x01840200
|
|
*
|
|
*----------------------------------------------------------------------- */
|
|
|
|
li r4,PB5AP
|
|
mtdcr EBC0_CFGADDR,r4
|
|
lis r4,0x040C
|
|
ori r4,r4,0x0200
|
|
mtdcr EBC0_CFGDATA,r4
|
|
|
|
li r4,PB5CR /* PB2CR=Peripheral Bank 2 Configuration Register */
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
lis r4,0x7A01
|
|
ori r4,r4,0xA000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
#endif
|
|
/*
|
|
* External Peripheral Control Register
|
|
*/
|
|
li r4,EBC0_CFG
|
|
mtdcr EBC0_CFGADDR,r4
|
|
|
|
lis r4,0xB84E
|
|
ori r4,r4,0xF000
|
|
mtdcr EBC0_CFGDATA,r4
|
|
/*
|
|
* drive POST code
|
|
*/
|
|
lis r4,0x7900
|
|
ori r4,r4,0x0080
|
|
li r3,0x0001
|
|
stb r3,0(r4) /* 01 -> external bus controller is initialized */
|
|
nop /* pass2 DCR errata #8 */
|
|
blr
|
|
|