upstream u-boot with additional patches for our devices/boards: https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ; Gbit ethernet patch for some LIME2 revisions ; with SPI flash support
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
 
 
 
 
 
 
u-boot/arch/arm/include/asm/arch-mxs/regs-ssp.h

416 lines
14 KiB

/*
* Freescale i.MX28 SSP Register Definitions
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
*
* Based on code from LTIB:
* Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MX28_REGS_SSP_H__
#define __MX28_REGS_SSP_H__
#include <asm/imx-common/regs-common.h>
#ifndef __ASSEMBLY__
#if defined(CONFIG_MX23)
struct mxs_ssp_regs {
mxs_reg_32(hw_ssp_ctrl0)
mxs_reg_32(hw_ssp_cmd0)
mxs_reg_32(hw_ssp_cmd1)
mxs_reg_32(hw_ssp_compref)
mxs_reg_32(hw_ssp_compmask)
mxs_reg_32(hw_ssp_timing)
mxs_reg_32(hw_ssp_ctrl1)
mxs_reg_32(hw_ssp_data)
mxs_reg_32(hw_ssp_sdresp0)
mxs_reg_32(hw_ssp_sdresp1)
mxs_reg_32(hw_ssp_sdresp2)
mxs_reg_32(hw_ssp_sdresp3)
mxs_reg_32(hw_ssp_status)
uint32_t reserved1[12];
mxs_reg_32(hw_ssp_debug)
mxs_reg_32(hw_ssp_version)
};
#elif defined(CONFIG_MX28)
struct mxs_ssp_regs {
mxs_reg_32(hw_ssp_ctrl0)
mxs_reg_32(hw_ssp_cmd0)
mxs_reg_32(hw_ssp_cmd1)
mxs_reg_32(hw_ssp_xfer_size)
mxs_reg_32(hw_ssp_block_size)
mxs_reg_32(hw_ssp_compref)
mxs_reg_32(hw_ssp_compmask)
mxs_reg_32(hw_ssp_timing)
mxs_reg_32(hw_ssp_ctrl1)
mxs_reg_32(hw_ssp_data)
mxs_reg_32(hw_ssp_sdresp0)
mxs_reg_32(hw_ssp_sdresp1)
mxs_reg_32(hw_ssp_sdresp2)
mxs_reg_32(hw_ssp_sdresp3)
mxs_reg_32(hw_ssp_ddr_ctrl)
mxs_reg_32(hw_ssp_dll_ctrl)
mxs_reg_32(hw_ssp_status)
mxs_reg_32(hw_ssp_dll_sts)
mxs_reg_32(hw_ssp_debug)
mxs_reg_32(hw_ssp_version)
};
#endif
static inline int mxs_ssp_bus_id_valid(int bus)
{
#if defined(CONFIG_MX23)
const unsigned int mxs_ssp_chan_count = 2;
#elif defined(CONFIG_MX28)
const unsigned int mxs_ssp_chan_count = 4;
#endif
if (bus >= mxs_ssp_chan_count)
return 0;
if (bus < 0)
return 0;
return 1;
}
static inline int mxs_ssp_clock_by_bus(unsigned int clock)
{
#if defined(CONFIG_MX23)
return 0;
#elif defined(CONFIG_MX28)
return clock;
#endif
}
static inline struct mxs_ssp_regs *mxs_ssp_regs_by_bus(unsigned int port)
{
switch (port) {
case 0:
return (struct mxs_ssp_regs *)MXS_SSP0_BASE;
case 1:
return (struct mxs_ssp_regs *)MXS_SSP1_BASE;
#ifdef CONFIG_MX28
case 2:
return (struct mxs_ssp_regs *)MXS_SSP2_BASE;
case 3:
return (struct mxs_ssp_regs *)MXS_SSP3_BASE;
#endif
default:
return NULL;
}
}
#endif
#define SSP_CTRL0_SFTRST (1 << 31)
#define SSP_CTRL0_CLKGATE (1 << 30)
#define SSP_CTRL0_RUN (1 << 29)
#define SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
#define SSP_CTRL0_LOCK_CS (1 << 27)
#define SSP_CTRL0_IGNORE_CRC (1 << 26)
#define SSP_CTRL0_READ (1 << 25)
#define SSP_CTRL0_DATA_XFER (1 << 24)
#define SSP_CTRL0_BUS_WIDTH_MASK (0x3 << 22)
#define SSP_CTRL0_BUS_WIDTH_OFFSET 22
#define SSP_CTRL0_BUS_WIDTH_ONE_BIT (0x0 << 22)
#define SSP_CTRL0_BUS_WIDTH_FOUR_BIT (0x1 << 22)
#define SSP_CTRL0_BUS_WIDTH_EIGHT_BIT (0x2 << 22)
#define SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
#define SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
#define SSP_CTRL0_LONG_RESP (1 << 19)
#define SSP_CTRL0_CHECK_RESP (1 << 18)
#define SSP_CTRL0_GET_RESP (1 << 17)
#define SSP_CTRL0_ENABLE (1 << 16)
#ifdef CONFIG_MX23
#define SSP_CTRL0_XFER_COUNT_OFFSET 0
#define SSP_CTRL0_XFER_COUNT_MASK 0xffff
#endif
#define SSP_CMD0_SOFT_TERMINATE (1 << 26)
#define SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
#define SSP_CMD0_PRIM_BOOT_OP_EN (1 << 24)
#define SSP_CMD0_BOOT_ACK_EN (1 << 23)
#define SSP_CMD0_SLOW_CLKING_EN (1 << 22)
#define SSP_CMD0_CONT_CLKING_EN (1 << 21)
#define SSP_CMD0_APPEND_8CYC (1 << 20)
#if defined(CONFIG_MX23)
#define SSP_CMD0_BLOCK_SIZE_MASK (0xf << 16)
#define SSP_CMD0_BLOCK_SIZE_OFFSET 16
#define SSP_CMD0_BLOCK_COUNT_MASK (0xff << 8)
#define SSP_CMD0_BLOCK_COUNT_OFFSET 8
#endif
#define SSP_CMD0_CMD_MASK 0xff
#define SSP_CMD0_CMD_OFFSET 0
#define SSP_CMD0_CMD_MMC_GO_IDLE_STATE 0x00
#define SSP_CMD0_CMD_MMC_SEND_OP_COND 0x01
#define SSP_CMD0_CMD_MMC_ALL_SEND_CID 0x02
#define SSP_CMD0_CMD_MMC_SET_RELATIVE_ADDR 0x03
#define SSP_CMD0_CMD_MMC_SET_DSR 0x04
#define SSP_CMD0_CMD_MMC_RESERVED_5 0x05
#define SSP_CMD0_CMD_MMC_SWITCH 0x06
#define SSP_CMD0_CMD_MMC_SELECT_DESELECT_CARD 0x07
#define SSP_CMD0_CMD_MMC_SEND_EXT_CSD 0x08
#define SSP_CMD0_CMD_MMC_SEND_CSD 0x09
#define SSP_CMD0_CMD_MMC_SEND_CID 0x0a
#define SSP_CMD0_CMD_MMC_READ_DAT_UNTIL_STOP 0x0b
#define SSP_CMD0_CMD_MMC_STOP_TRANSMISSION 0x0c
#define SSP_CMD0_CMD_MMC_SEND_STATUS 0x0d
#define SSP_CMD0_CMD_MMC_BUSTEST_R 0x0e
#define SSP_CMD0_CMD_MMC_GO_INACTIVE_STATE 0x0f
#define SSP_CMD0_CMD_MMC_SET_BLOCKLEN 0x10
#define SSP_CMD0_CMD_MMC_READ_SINGLE_BLOCK 0x11
#define SSP_CMD0_CMD_MMC_READ_MULTIPLE_BLOCK 0x12
#define SSP_CMD0_CMD_MMC_BUSTEST_W 0x13
#define SSP_CMD0_CMD_MMC_WRITE_DAT_UNTIL_STOP 0x14
#define SSP_CMD0_CMD_MMC_SET_BLOCK_COUNT 0x17
#define SSP_CMD0_CMD_MMC_WRITE_BLOCK 0x18
#define SSP_CMD0_CMD_MMC_WRITE_MULTIPLE_BLOCK 0x19
#define SSP_CMD0_CMD_MMC_PROGRAM_CID 0x1a
#define SSP_CMD0_CMD_MMC_PROGRAM_CSD 0x1b
#define SSP_CMD0_CMD_MMC_SET_WRITE_PROT 0x1c
#define SSP_CMD0_CMD_MMC_CLR_WRITE_PROT 0x1d
#define SSP_CMD0_CMD_MMC_SEND_WRITE_PROT 0x1e
#define SSP_CMD0_CMD_MMC_ERASE_GROUP_START 0x23
#define SSP_CMD0_CMD_MMC_ERASE_GROUP_END 0x24
#define SSP_CMD0_CMD_MMC_ERASE 0x26
#define SSP_CMD0_CMD_MMC_FAST_IO 0x27
#define SSP_CMD0_CMD_MMC_GO_IRQ_STATE 0x28
#define SSP_CMD0_CMD_MMC_LOCK_UNLOCK 0x2a
#define SSP_CMD0_CMD_MMC_APP_CMD 0x37
#define SSP_CMD0_CMD_MMC_GEN_CMD 0x38
#define SSP_CMD0_CMD_SD_GO_IDLE_STATE 0x00
#define SSP_CMD0_CMD_SD_ALL_SEND_CID 0x02
#define SSP_CMD0_CMD_SD_SEND_RELATIVE_ADDR 0x03
#define SSP_CMD0_CMD_SD_SET_DSR 0x04
#define SSP_CMD0_CMD_SD_IO_SEND_OP_COND 0x05
#define SSP_CMD0_CMD_SD_SELECT_DESELECT_CARD 0x07
#define SSP_CMD0_CMD_SD_SEND_CSD 0x09
#define SSP_CMD0_CMD_SD_SEND_CID 0x0a
#define SSP_CMD0_CMD_SD_STOP_TRANSMISSION 0x0c
#define SSP_CMD0_CMD_SD_SEND_STATUS 0x0d
#define SSP_CMD0_CMD_SD_GO_INACTIVE_STATE 0x0f
#define SSP_CMD0_CMD_SD_SET_BLOCKLEN 0x10
#define SSP_CMD0_CMD_SD_READ_SINGLE_BLOCK 0x11
#define SSP_CMD0_CMD_SD_READ_MULTIPLE_BLOCK 0x12
#define SSP_CMD0_CMD_SD_WRITE_BLOCK 0x18
#define SSP_CMD0_CMD_SD_WRITE_MULTIPLE_BLOCK 0x19
#define SSP_CMD0_CMD_SD_PROGRAM_CSD 0x1b
#define SSP_CMD0_CMD_SD_SET_WRITE_PROT 0x1c
#define SSP_CMD0_CMD_SD_CLR_WRITE_PROT 0x1d
#define SSP_CMD0_CMD_SD_SEND_WRITE_PROT 0x1e
#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_START 0x20
#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_END 0x21
#define SSP_CMD0_CMD_SD_ERASE_GROUP_START 0x23
#define SSP_CMD0_CMD_SD_ERASE_GROUP_END 0x24
#define SSP_CMD0_CMD_SD_ERASE 0x26
#define SSP_CMD0_CMD_SD_LOCK_UNLOCK 0x2a
#define SSP_CMD0_CMD_SD_IO_RW_DIRECT 0x34
#define SSP_CMD0_CMD_SD_IO_RW_EXTENDED 0x35
#define SSP_CMD0_CMD_SD_APP_CMD 0x37
#define SSP_CMD0_CMD_SD_GEN_CMD 0x38
#define SSP_CMD1_CMD_ARG_MASK 0xffffffff
#define SSP_CMD1_CMD_ARG_OFFSET 0
#if defined(CONFIG_MX28)
#define SSP_XFER_SIZE_XFER_COUNT_MASK 0xffffffff
#define SSP_XFER_SIZE_XFER_COUNT_OFFSET 0
#define SSP_BLOCK_SIZE_BLOCK_COUNT_MASK (0xffffff << 4)
#define SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET 4
#define SSP_BLOCK_SIZE_BLOCK_SIZE_MASK 0xf
#define SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET 0
#endif
#define SSP_COMPREF_REFERENCE_MASK 0xffffffff
#define SSP_COMPREF_REFERENCE_OFFSET 0
#define SSP_COMPMASK_MASK_MASK 0xffffffff
#define SSP_COMPMASK_MASK_OFFSET 0
#define SSP_TIMING_TIMEOUT_MASK (0xffff << 16)
#define SSP_TIMING_TIMEOUT_OFFSET 16
#define SSP_TIMING_CLOCK_DIVIDE_MASK (0xff << 8)
#define SSP_TIMING_CLOCK_DIVIDE_OFFSET 8
#define SSP_TIMING_CLOCK_RATE_MASK 0xff
#define SSP_TIMING_CLOCK_RATE_OFFSET 0
#define SSP_CTRL1_SDIO_IRQ (1 << 31)
#define SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
#define SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
#define SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
#define SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
#define SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
#define SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
#define SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
#define SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
#define SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
#define SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
#define SSP_CTRL1_FIFO_UNDERRUN_EN (1 << 20)
#define SSP_CTRL1_CEATA_CCS_ERR_IRQ (1 << 19)
#define SSP_CTRL1_CEATA_CCS_ERR_IRQ_EN (1 << 18)
#define SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
#define SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
#define SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
#define SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
#define SSP_CTRL1_DMA_ENABLE (1 << 13)
#define SSP_CTRL1_CEATA_CCS_ERR_EN (1 << 12)
#define SSP_CTRL1_SLAVE_OUT_DISABLE (1 << 11)
#define SSP_CTRL1_PHASE (1 << 10)
#define SSP_CTRL1_POLARITY (1 << 9)
#define SSP_CTRL1_SLAVE_MODE (1 << 8)
#define SSP_CTRL1_WORD_LENGTH_MASK (0xf << 4)
#define SSP_CTRL1_WORD_LENGTH_OFFSET 4
#define SSP_CTRL1_WORD_LENGTH_RESERVED0 (0x0 << 4)
#define SSP_CTRL1_WORD_LENGTH_RESERVED1 (0x1 << 4)
#define SSP_CTRL1_WORD_LENGTH_RESERVED2 (0x2 << 4)
#define SSP_CTRL1_WORD_LENGTH_FOUR_BITS (0x3 << 4)
#define SSP_CTRL1_WORD_LENGTH_EIGHT_BITS (0x7 << 4)
#define SSP_CTRL1_WORD_LENGTH_SIXTEEN_BITS (0xf << 4)
#define SSP_CTRL1_SSP_MODE_MASK 0xf
#define SSP_CTRL1_SSP_MODE_OFFSET 0
#define SSP_CTRL1_SSP_MODE_SPI 0x0
#define SSP_CTRL1_SSP_MODE_SSI 0x1
#define SSP_CTRL1_SSP_MODE_SD_MMC 0x3
#define SSP_CTRL1_SSP_MODE_MS 0x4
#define SSP_DATA_DATA_MASK 0xffffffff
#define SSP_DATA_DATA_OFFSET 0
#define SSP_SDRESP0_RESP0_MASK 0xffffffff
#define SSP_SDRESP0_RESP0_OFFSET 0
#define SSP_SDRESP1_RESP1_MASK 0xffffffff
#define SSP_SDRESP1_RESP1_OFFSET 0
#define SSP_SDRESP2_RESP2_MASK 0xffffffff
#define SSP_SDRESP2_RESP2_OFFSET 0
#define SSP_SDRESP3_RESP3_MASK 0xffffffff
#define SSP_SDRESP3_RESP3_OFFSET 0
#define SSP_DDR_CTRL_DMA_BURST_TYPE_MASK (0x3 << 30)
#define SSP_DDR_CTRL_DMA_BURST_TYPE_OFFSET 30
#define SSP_DDR_CTRL_NIBBLE_POS (1 << 1)
#define SSP_DDR_CTRL_TXCLK_DELAY_TYPE (1 << 0)
#define SSP_DLL_CTRL_REF_UPDATE_INT_MASK (0xf << 28)
#define SSP_DLL_CTRL_REF_UPDATE_INT_OFFSET 28
#define SSP_DLL_CTRL_SLV_UPDATE_INT_MASK (0xff << 20)
#define SSP_DLL_CTRL_SLV_UPDATE_INT_OFFSET 20
#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_MASK (0x3f << 10)
#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_OFFSET 10
#define SSP_DLL_CTRL_SLV_OVERRIDE (1 << 9)
#define SSP_DLL_CTRL_GATE_UPDATE (1 << 7)
#define SSP_DLL_CTRL_SLV_DLY_TARGET_MASK (0xf << 3)
#define SSP_DLL_CTRL_SLV_DLY_TARGET_OFFSET 3
#define SSP_DLL_CTRL_SLV_FORCE_UPD (1 << 2)
#define SSP_DLL_CTRL_RESET (1 << 1)
#define SSP_DLL_CTRL_ENABLE (1 << 0)
#define SSP_STATUS_PRESENT (1 << 31)
#define SSP_STATUS_MS_PRESENT (1 << 30)
#define SSP_STATUS_SD_PRESENT (1 << 29)
#define SSP_STATUS_CARD_DETECT (1 << 28)
#define SSP_STATUS_DMABURST (1 << 22)
#define SSP_STATUS_DMASENSE (1 << 21)
#define SSP_STATUS_DMATERM (1 << 20)
#define SSP_STATUS_DMAREQ (1 << 19)
#define SSP_STATUS_DMAEND (1 << 18)
#define SSP_STATUS_SDIO_IRQ (1 << 17)
#define SSP_STATUS_RESP_CRC_ERR (1 << 16)
#define SSP_STATUS_RESP_ERR (1 << 15)
#define SSP_STATUS_RESP_TIMEOUT (1 << 14)
#define SSP_STATUS_DATA_CRC_ERR (1 << 13)
#define SSP_STATUS_TIMEOUT (1 << 12)
#define SSP_STATUS_RECV_TIMEOUT_STAT (1 << 11)
#define SSP_STATUS_CEATA_CCS_ERR (1 << 10)
#define SSP_STATUS_FIFO_OVRFLW (1 << 9)
#define SSP_STATUS_FIFO_FULL (1 << 8)
#define SSP_STATUS_FIFO_EMPTY (1 << 5)
#define SSP_STATUS_FIFO_UNDRFLW (1 << 4)
#define SSP_STATUS_CMD_BUSY (1 << 3)
#define SSP_STATUS_DATA_BUSY (1 << 2)
#define SSP_STATUS_BUSY (1 << 0)
#define SSP_DLL_STS_REF_SEL_MASK (0x3f << 8)
#define SSP_DLL_STS_REF_SEL_OFFSET 8
#define SSP_DLL_STS_SLV_SEL_MASK (0x3f << 2)
#define SSP_DLL_STS_SLV_SEL_OFFSET 2
#define SSP_DLL_STS_REF_LOCK (1 << 1)
#define SSP_DLL_STS_SLV_LOCK (1 << 0)
#define SSP_DEBUG_DATACRC_ERR_MASK (0xf << 28)
#define SSP_DEBUG_DATACRC_ERR_OFFSET 28
#define SSP_DEBUG_DATA_STALL (1 << 27)
#define SSP_DEBUG_DAT_SM_MASK (0x7 << 24)
#define SSP_DEBUG_DAT_SM_OFFSET 24
#define SSP_DEBUG_DAT_SM_DSM_IDLE (0x0 << 24)
#define SSP_DEBUG_DAT_SM_DSM_WORD (0x2 << 24)
#define SSP_DEBUG_DAT_SM_DSM_CRC1 (0x3 << 24)
#define SSP_DEBUG_DAT_SM_DSM_CRC2 (0x4 << 24)
#define SSP_DEBUG_DAT_SM_DSM_END (0x5 << 24)
#define SSP_DEBUG_MSTK_SM_MASK (0xf << 20)
#define SSP_DEBUG_MSTK_SM_OFFSET 20
#define SSP_DEBUG_MSTK_SM_MSTK_IDLE (0x0 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_CKON (0x1 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_BS1 (0x2 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_TPC (0x3 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_BS2 (0x4 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_HDSHK (0x5 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_BS3 (0x6 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_RW (0x7 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_CRC1 (0x8 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_CRC2 (0x9 << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_BS0 (0xa << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_END1 (0xb << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_END2W (0xc << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_END2R (0xd << 20)
#define SSP_DEBUG_MSTK_SM_MSTK_DONE (0xe << 20)
#define SSP_DEBUG_CMD_OE (1 << 19)
#define SSP_DEBUG_DMA_SM_MASK (0x7 << 16)
#define SSP_DEBUG_DMA_SM_OFFSET 16
#define SSP_DEBUG_DMA_SM_DMA_IDLE (0x0 << 16)
#define SSP_DEBUG_DMA_SM_DMA_DMAREQ (0x1 << 16)
#define SSP_DEBUG_DMA_SM_DMA_DMAACK (0x2 << 16)
#define SSP_DEBUG_DMA_SM_DMA_STALL (0x3 << 16)
#define SSP_DEBUG_DMA_SM_DMA_BUSY (0x4 << 16)
#define SSP_DEBUG_DMA_SM_DMA_DONE (0x5 << 16)
#define SSP_DEBUG_DMA_SM_DMA_COUNT (0x6 << 16)
#define SSP_DEBUG_MMC_SM_MASK (0xf << 12)
#define SSP_DEBUG_MMC_SM_OFFSET 12
#define SSP_DEBUG_MMC_SM_MMC_IDLE (0x0 << 12)
#define SSP_DEBUG_MMC_SM_MMC_CMD (0x1 << 12)
#define SSP_DEBUG_MMC_SM_MMC_TRC (0x2 << 12)
#define SSP_DEBUG_MMC_SM_MMC_RESP (0x3 << 12)
#define SSP_DEBUG_MMC_SM_MMC_RPRX (0x4 << 12)
#define SSP_DEBUG_MMC_SM_MMC_TX (0x5 << 12)
#define SSP_DEBUG_MMC_SM_MMC_CTOK (0x6 << 12)
#define SSP_DEBUG_MMC_SM_MMC_RX (0x7 << 12)
#define SSP_DEBUG_MMC_SM_MMC_CCS (0x8 << 12)
#define SSP_DEBUG_MMC_SM_MMC_PUP (0x9 << 12)
#define SSP_DEBUG_MMC_SM_MMC_WAIT (0xa << 12)
#define SSP_DEBUG_CMD_SM_MASK (0x3 << 10)
#define SSP_DEBUG_CMD_SM_OFFSET 10
#define SSP_DEBUG_CMD_SM_CSM_IDLE (0x0 << 10)
#define SSP_DEBUG_CMD_SM_CSM_INDEX (0x1 << 10)
#define SSP_DEBUG_CMD_SM_CSM_ARG (0x2 << 10)
#define SSP_DEBUG_CMD_SM_CSM_CRC (0x3 << 10)
#define SSP_DEBUG_SSP_CMD (1 << 9)
#define SSP_DEBUG_SSP_RESP (1 << 8)
#define SSP_DEBUG_SSP_RXD_MASK 0xff
#define SSP_DEBUG_SSP_RXD_OFFSET 0
#define SSP_VERSION_MAJOR_MASK (0xff << 24)
#define SSP_VERSION_MAJOR_OFFSET 24
#define SSP_VERSION_MINOR_MASK (0xff << 16)
#define SSP_VERSION_MINOR_OFFSET 16
#define SSP_VERSION_STEP_MASK 0xffff
#define SSP_VERSION_STEP_OFFSET 0
#endif /* __MX28_REGS_SSP_H__ */