upstream u-boot with additional patches for our devices/boards:
https://lists.denx.de/pipermail/u-boot/2017-March/282789.html (AXP crashes) ;
Gbit ethernet patch for some LIME2 revisions ;
with SPI flash support
You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
92 lines
2.3 KiB
92 lines
2.3 KiB
/*
|
|
* Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc83xx.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Breathe some life into the CPU...
|
|
*
|
|
* Set up the memory map,
|
|
* initialize a bunch of registers,
|
|
* initialize the UPM's
|
|
*/
|
|
void cpu_init_f (volatile immap_t * im)
|
|
{
|
|
/* Pointer is writable since we allocated a register for it */
|
|
gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
|
|
|
|
/* global data region was cleared in start.S */
|
|
|
|
/* system performance tweaking */
|
|
|
|
#ifdef CONFIG_SYS_ACR_PIPE_DEP
|
|
/* Arbiter pipeline depth */
|
|
im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
|
|
(CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_ACR_RPTCNT
|
|
/* Arbiter repeat count */
|
|
im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
|
|
(CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_SPCR_OPT
|
|
/* Optimize transactions between CSB and other devices */
|
|
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
|
|
(CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
|
|
#endif
|
|
|
|
/* Enable Time Base & Decrementer (so we will have udelay()) */
|
|
im->sysconf.spcr |= SPCR_TBEN;
|
|
|
|
/* DDR control driver register */
|
|
#ifdef CONFIG_SYS_DDRCDR
|
|
im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
|
|
#endif
|
|
/* Output buffer impedance register */
|
|
#ifdef CONFIG_SYS_OBIR
|
|
im->sysconf.obir = CONFIG_SYS_OBIR;
|
|
#endif
|
|
|
|
/*
|
|
* Memory Controller:
|
|
*/
|
|
|
|
/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
|
|
* addresses - these have to be modified later when FLASH size
|
|
* has been determined
|
|
*/
|
|
|
|
#if defined(CONFIG_SYS_NAND_BR_PRELIM) \
|
|
&& defined(CONFIG_SYS_NAND_OR_PRELIM) \
|
|
&& defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
|
|
&& defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
|
|
set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
|
|
set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
|
|
im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
|
|
im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
|
|
#else
|
|
#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Get timebase clock frequency (like cpu_clk in Hz)
|
|
*/
|
|
unsigned long get_tbclk(void)
|
|
{
|
|
return (gd->bus_clk + 3L) / 4L;
|
|
}
|
|
|
|
void puts(const char *str)
|
|
{
|
|
while (*str)
|
|
putc(*str++);
|
|
}
|
|
|